Can U help me to find a problem w / Mozilla & amp; Display of Netscape?

Similar Questions

• My Aero notebook will not be stopped correctly, no more. Can you help me resolve this you problem?

  My Aero notebook will not be stopped correctly more and when I turn it on it said "it was not shut down properly.  Can you help me resolve this you problem?

  It runs on Microsoft Windows 7.
  I got messages saying something on a certificate.
  At the bottom I selected the hardware and the drivers, but I don't know if that's the problem.
  Hello
   
  
  1. you receive an error message/code? If Yes, what is the exact full error message?
  2 have you made changes on the computer before this problem?
  3 does take more time to shut down the computer?
   
  
  Follow the steps.
   
  
  Method 1
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
  
  Method 2
  Run the fix since the articles and if it helps.
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/975777
  You can't do a computer that runs Windows 7 stops or sleep
  http://support.Microsoft.com/kb/977307
   
  Run a virus with Microsoft Safety scanner scan and check if the computer is infected.
  Method 3: Microsoft Security Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  You can also download & run Microsoft Security Essentials on your computer.
  See the link: http://windows.microsoft.com/en-US/windows/products/security-essentials
   
  Response with more information to help you.

• I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

  I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

  I tried to uninstall and install not able to set several times.

  Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

  Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?

• Im getting random crashes since a new Barebone pc that I just built! Can someone help me to find out why? Glued is the latest crash codes.

  Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 locale ID: 1033 additional information about the problem: BCCode: 24 BCP1: 001904FB BCP2: 9FE034D4 BCP3: 9FE030B0 BCP4: 82E88C3B OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1 files that help describe the problem: C:\Windows\Minidump\010113-14804-01.dmp C:\Users\James\AppData\Local\Temp\WER-21091-0.sysdata.xm

  Jimmy

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  'http://support.microsoft.com/kb/244617 '.

  Bugcheck A, {b 52, 10, 2, 1, 82cee48e}
  Probably caused by: memory_corruption (nt! MiIdentifyPfn + 1ed)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BugCheck D1, {da2de88d, 2, 0, 8c847c37}
  Probably caused by: memory_corruption
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  Error checking 1A, {8885, 84a 26514, 84a10c38, 205}
  Probably caused by: memory_corruption (nt! MiRelinkStandbyPage + 8B)

• Can someone help me to find a missing folder please?

  Hello

  Please help me locate the folder missing with hundreds of photos very important!

  I recently updated my external drive. I used 2 WD t where I stored all my pictures. When WD had full I have advised me to buy a NAS (Synology). Since the day 1 my problems began and since the NAS then is my biggest headache. I have connected my old WD directly to the NAS can access all images of my old WD through it. But somehow a folder has not changed, and all I see is that this file can not be located. I tried to find my images using all the techniques described in the forums. However, I can't find the entire folder through Finder, or through search engine...

  Is it possible to access my folder with valuable pictures?

  Help, please...

  NIDA

  If the photos were already imported into LR before that all happened, don't upload them again. They must stay in the Lightroom library Module. Find them (I have described how to do this search above), and then you can use them. Import you will lose changes and metadata supplied by the user, and you will now have two copies in your LR library, not a good idea.

• Can someone help me to find out what is my Web server?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Im trying to set up Windows mail and I wonder which internet server use my system?  Uh, IDK - please help me find this answer.  Thank you very much in advance for your help! (Yes, I'm a blonde)     L*O*L     : )

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jacqueline,.

  You don't say which is your internet service provider. In general, I assume that you are referring to sections POP and SMTP set up your e-mail account, where he asks the details of the ISP. You should really be able to find it by visiting your Internet provider (you get your broadband society) Web site. Check the support section and if a search box is available on the support page, try typing in "configure windows mail" to see if this brings all the information.

  If you still have problems then let us know which provides your broadband and I'm sure that someone will be able to direct you to the relevant page on the support site for your ISP.

  You would like to check out this link from my Web site: http://vistasupport.mvps.org/adding_an_email_account_to_windows_mail.htm look particularly below Fig. 4:. This shows you the type of information that you will need to search on the website of your ISP.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• can someone help me I have a problem with tidynetwork

  This virus or anything that turns words ordinary links

  Hi Louie,

  1. What is the issue you are having with tidy network?
  2. the problem occurs with any particular application or all applications?

  I suggest you try the steps from the following link:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Please can you HELP: where to find free tutorials for beginners in graphic design?

  I was told to go to each individual forum, lol im new here idk. I would like to learn graphic design. I'm trying to find free tutorials online. I don't have everything other than the player and these pdf files adobe software. I like the drawing and think I want to go back to College. I think graphics would be cool! I have NO idea how use any photoshop, dreamweaver, or has any other adobe software. I can't afford to lynda.com, coursera.org, udemy, etc.. Is there free tutorials for people who know ABSOLUTELY NOTHING about this software? I am looking for tutorials showing me how to use software that use graphic artists. I don't know how to use a MAC computer either, never owned one. Is there free tutorials to help me on adobe.com or youtube.com?

  Double - where to find free tutorials for beginners in graphic design? LOCKING

  [Please do not post messages in double... MOD]

  Basics of graphic design in Photoshop | Adobe Photoshop CC tutorials

  Reference:

  Adobe TV

  In addition, you can learn about YouTube.  More on useful documents are available on the website of Adobe itself.

  For example:

  https://helpx.Adobe.com/PDF/photoshop_reference.PDF

• How can I help my pc find out which program to open Photoshop CS6 download with?

  I downloaded a .7z file that is supposed to be Photoshop CS6. My computer is unable to establish what program use to open the download with - and I have no idea! I read somewhere that you need to download an .exe so file, but I downloaded it several times now and the same thing. There is no .exe file, I can find. Help, please!

  Hi IdaMari,

  .7z is a compressed file that can be opened in an extraction software. If you are using a windows machine, you can use the software Winrar, Winzip or 7z to extract the .7z file.

  I hope it helps.

  Concerning

  Ludo has

• Can someone help me to find out how this dynamic?

  I've never done anything this dynamic before and that I could use help to understand how it works in qml

  I want to do something like below

  Added several createObject(); and be able to delete

  so I might have like createdControl1, createdControl2, createdControl3 etc.

  Could someone help me please

  I really appreciate any help you can provide.

  Kind regards

  iXec

  NavigationPane {
      property int buttonIndex: 1
      property variant createdControl
      Page {
  
          Container {
              Button {
                  onClicked: {
                      var createdControl = createdControl + buttonIndex
                      createdControl = test.createObject();
                      root.add(createdControl);
                      buttonIndex ++;
                  }
                  text: "add"
              }
              Button {
                  onClicked: {
                      root.remove(createdControl1)
                  }
                  text: "remove"
              }
          }
  
          attachedObjects: [
              ComponentDefinition {
                  id: test
                  source: "test.qml"
              }
          ]
      }
  
  }
  

  I suggest that you look at This example

  Attention to the list of properties, and how elements are accessible after

• Can anyone help with another amateur having problems with the sharp slowdown in LR 5.7?

  I noticed sharp slowdown in performance exclusively in LR and especially in the library module.  I spent considerable time in other forums and I tried many things proposed to others with very similar problems, but still cannot fix it.  LR has more recently left working in total with the "Lightroom has encountered a problem and needs to close", after the reboot, the following error message appears: the catalog called 'Lightroom 5 catalogue' has been left in an inconsistent state.  Lightroom needs to restore the catalog before proceeding.  He tried to 'restore the catalogue' for about 75 hours now.

  So if Lightroom is still trying to restore this catalogue I stop the process and replace your latest backup of this catalogue. This would mean that you would import all the images that have been imported since the last backup.

• I disabled my own cookies and now I can't help? Windows XP and I use Mozilla Firefox?

  (Inadvertently), I disabled the cookies on my computer. Now I can't get to my Hotmail e-mail account. I went by the "tools/options/life exercise private and whatever he says 'enabled' (everything is checked).» I even restarted my computer, but nothing works. I use Windows XP and like it. I use Mozilla Firefox most of the time, but sometimes I use Windows Explorer. What should I do?

  Hi nancybaird

   

  Because the problem is with Windows Live Hotmail, I would recommend checking resources specific to Microsoft Windows Live. Please visit the links below to find a community that will provide the support ask you in the right direction for Windows Hotmail related issues.

  http://windowslivehelp.com/forums.aspx?ProductID=1

   

  I hope this helps.

• Can someone help me? my pc not to remember my display settings after a system restore to the factory settings

  I had to restore my pc to factory settings. And now I am unable to use my lcd hd tv as a monitor... I could do before you restore my pc. Any help with this would be much appreciated

  my pc not to remember the settings.and of display for Office moves to the right

  Hello

  Method 1: I would suggest to run set to go to the following link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: I also suggest you follow the link below in the form of measures: http://windows.microsoft.com/en-GB/windows-vista/Troubleshoot-multiple-monitor-problems

  Hope this information is helpful

• Hi I find a problem with my iPad... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hi I find a problem with my iPad 2 Air... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold both down until you see the Apple logo.

  What is your ipad 16g / 32g or higher?

  See you soon

  Brian

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!