Can V5 591 G work without the built-in battery?
Hi, guys!
My laptop is connected when I use it and my personal experience, the guidelines of the Acer in the user manual and this link here http://acer.custhelp.com/app/answers/detail/a_id/2384/~/how-to-charge-and-care-for-your-acer-battery on how to extend the life of the battery, this can severely affect it, so it should better be deleted.
Unfortunately, the battery of my model is not easily removable like on my previous laptop, so I would like to know, if I open the bottom cover and remove the baterry, will this void my warranty and will laptop funtion without the battery?
It will work without the battery probably fine, but leave the battery in a drawer does not really the battery in good shape. If you leave it outside, you must challenge once in a while and let drain a little and recharge. I put a new in the drawer for about a year and a half and it degraded just sitting there.
There is also the part of power failure. Without battery, the power goes off and the laptop just dies instantly. Not only you lose any possibly work, but it can cause system problems and sometimes damage the laptop.
Modern power management circuit will prevent "overcharge" the battery, even if we let him load 24/7. He that is detrimental to the battery recharges 100%, let it drain completely or nearly completely then recharge to 100% several times. This puts a lot of wear and tear on cells.
Try to keep your load between 20% and 80%, while making only a FULL load + discharge cycle once in a great while. This preserves the overall longevity of the ability of the battery to hold a charge. In addition, the cooler you keep the laptop, the better for the battery as well.
Tags: Acer Laptops
Similar Questions
-
Apex can work without the oracle application server? How?
My question is exactly what the title says.
Apex can work without the Oracle application server?
I heard that there need a webserver to work but not necessarily the oracle application server.
Is this true?
With ONLY apache installed apex can work on it?
Thank you
Don't forget to assign points to those who help you! (Mark the thread useful/correct)
My home page
Best regards
Published by: Igor Carrasco on May 29, 2009 14:59
Published by: Igor Carrasco on May 29, 2009 14:59Hello
Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).
http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm
But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.
Hope this helps,
John.
--------------------------------------------
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone! -
Age of Mythology edition work without the game disc
Original title: i own age of Mythology Gold edition and wonder if someone could tell me how this game works without the game disc (I still have it is simply for practical reasons)
I have also heard people say in other threads that you're not supposed to do that, but I find that hard to believe when you can go to the website of blizzard entertainment, and they will give you instructions step by step to do this for all of their gamesHello
You may need to contact the vendor of the game for help.
-
I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
How can I use Office Update without the Office CD?
How can I use Office Update without the Office CD? On the microsoft Web site, I clicked the options which mean that I would not need the CD (which was not provided with the laptop), but poartway through the service pack update, I get a request for the Office 2000 Professional CD.
Any suggestions?
Hello
Did you mean an office or a note?
As far as I know the a Note is part of the recovery Image and the CD is not supplied with the unit. In addition, Toshiba units are not delivered with the Office 2000 software.However, have you checked to aid either in Word update function?
You will find an option called verification of updates
http://Office.Microsoft.com/en-us/officeupdate/default.aspxGood bye
-
Satellite A100 PSAA9C does not work without the battery inside
I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).
The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.
If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.
If I do this a couple times, the machine will be not even by post before turning off.
If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.
Thank you.
Hello
If I understand your assignment, the laptop does not power up without the battery
But it will light if the battery is connected.The question is; Is the power led on if the AC adapter is plugged?
If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.I think you should test a new adapter. Maybe it helps!
-
Mouse and multimedia keys does not work without the fn key
Lenovo G500
model without 20236
Windows 7 sp1
the mouse and the multimedia keys does not work without the fn key. Help, please
[Original title: Lenovo g 500]
Hello
Check with Lenovo support, their drivers and documentation online and ask for their
Forums about known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/ I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2. Can I make it work? The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?
Version 13 capture is more than one camera to tape
http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html
-
How can I reinstall Acrobat 8 without the disc? I switched from XP to Windows 7. I have the serial number.
Hi cawcaw70,
You can download Acrobat 8 from: products download Acrobat | 9: 8
and use the serial number to activate the software.
Kind regards
Rave
-
How can I reinstall Windows 7 without the CD?
My laptop came preloaded with Windows 7 and there is no CD or something with it. I'm having some problems and you may have to reformat my hard drive. How will I be able to put Windows 7 on without the CD?
Most manufacturer who deliver without CD include a "recovery partition" or "factory image partition" which you can access during the boot. Dell provided a CD and also came the recovery partition, for example, called Dell Factory Image Restore. You would have to check in your manual to find out how to access the installation if you have a.
But zero means just that - the pc is the same as it was when you opened the box, so you should have a lot of work to get all your applications and so on. It's all a bit drastic. I hope that you are able to resolve your problems without it.
-
Satellite U400 - MSN Messenger does not work with the built-in webcam
Hello
I have a satellite 400 with integrated webcam.
The camera assistance software starts automatically and the webcam works fine with this software.But if I want to use MSN Messenger with webcam, it doesn't.
The error message is coming: 'other software using the webcam.
And if I want to configure the webcam in MSN Messenger software via the menu 'extras'... the message is coming: "the audio configuration and videa cannot start."
Who can help me?
:-(
> The camera assistance software starts automatically and the webcam works fine with this software.
I have a U400 too and I m using the internal webcam with Skype.
It s works perfectly!But my software does not load automatically. I disabled in the msconfig.
Software doesn't need to be loaded automatically in order to get it in MSM or Skype.
So I recommend to disable auto-start.In addition, you must update your operating system to the State...
-
How can I install my webcam without the CD?
Need help to connect a webcam XP without CD
Hello
1. What is the serial number and model of the webcam?
2. don't webcam invites you to the driver when you connect?If you plug the webcam into your computer, check to see if she's trying to get the drivers. If so, it will prompt you to insert the CD. It seems also quick get the drivers online. (Make sure that you have an active Internet connection).If this does not help, follow these steps.
a. go to the manufacturer's Web site, check for the section of the driver, there also you webcam name and number.
b. download the driver for the webcam on your computer.
c. This will put the driver on your computer, like installing would be CD. Save the driver to your desktop, where you can easily find it.
d. open the webcam driver file and follow the on-screen installation instructions.
e. now, connect your webcam to your computer. -
Can MapPoint 2011 - be installed without the substitution of previous versions?
I need to be able to keep older versions of MapPoint on my laptop while having access to 2011. I could install 2009 without the substitution of 2004 and 2006, but my IT people say it cannot be done with 2011. Can he?
Hello
Check with the help of MapPoint and in the MapPoint Forums.
Highway, Streets & Trips, MapPoint - Forum
http://social.Microsoft.com/forums/is/streetsandtrips/threadsMapPoiint - Support
http://www.Microsoft.com/MapPoint/en-us/support.aspxSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hi, my desktop has XP pro top. I lost the installation disc. I have a premium version of W7 (32 bit) I would like to install. Can I do this without the disc XP pro?
original title: install Windows 7When upgrading from Windows XP to Windows 7, you must perform a custom (clean) installation because there is no real upgrade path. Perhaps the links below will help:
Clean install Windows 7 with upgrade media
http://www.winsupersite.com/article/Win7/clean-install-Windows-7-with-upgrade-mediaClean-install Windows 7 from upgrade disc
http://WindowsSecrets.com/top-story/clean-install-Windows-7-from-the-upgrade-disc/Kind regards
-
How can I reinstall vista without the disc and remove windows 7 (an illegal version) also without the disc. I have only the original vista coded key stuck on the computer when the vista system installed on the purchase of the computer. My daughter was not happy with vista and had someone to install windows 7, which turned out to be an illegal version.
Hello
If you have a recovery partition likely has been cleared by installing Windows 7.
You can try the recovery partition, no guarantees.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
Maybe you are looking for
-
OfficeJet J4550 with Snow Leopard - printer does not
I have recently upgraded to Snow Leopard, and had trouble with scanning on my officejet J4550 until I read the posts on this forum, downloaded the recent update and learned to go to preview or Capture images. Now I can scan, but I cannot print. After
-
How to create 1 file per second
Hello I am new to LabVIEW and I found an example VI similar to my needs. But I need to create 1 file per second with a date/time stamp will automatically name the files. Is it possible to do? Thank you Luis
-
When I'm trying to do a disk defragment, I get a message that /f chkdsc. is planned. I don't know what it is, how do I get rid of it or go around it, defragment my disk? Thank you!
-
I use a laptop and move between two locations each with its own printer. Whenever I move, I have to change the default printer by opening printers & faxes from the control panel. Is it possible to have windows to automatically select a spare printe
-
Telnet issue... What am I doing wrong?
OK, I have two configuration network to see them via the VPN. The VPN is provided by a 515e and a 501F catalogue. 515e 192.168.50.0 network, the network 501F to the catalog is 192.168.51.0 External ip address of the 515e is x.x.71.7, the 501 is x.x.7