Age of Mythology edition work without the game disc

Similar Questions

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• Can V5 591 G work without the built-in battery?

  Hi, guys!

  My laptop is connected when I use it and my personal experience, the guidelines of the Acer in the user manual and this link here http://acer.custhelp.com/app/answers/detail/a_id/2384/~/how-to-charge-and-care-for-your-acer-battery on how to extend the life of the battery, this can severely affect it, so it should better be deleted.

  Unfortunately, the battery of my model is not easily removable like on my previous laptop, so I would like to know, if I open the bottom cover and remove the baterry, will this void my warranty and will laptop funtion without the battery?

  It will work without the battery probably fine, but leave the battery in a drawer does not really the battery in good shape. If you leave it outside, you must challenge once in a while and let drain a little and recharge. I put a new in the drawer for about a year and a half and it degraded just sitting there.

  There is also the part of power failure. Without battery, the power goes off and the laptop just dies instantly. Not only you lose any possibly work, but it can cause system problems and sometimes damage the laptop.

  Modern power management circuit will prevent "overcharge" the battery, even if we let him load 24/7. He that is detrimental to the battery recharges 100%, let it drain completely or nearly completely then recharge to 100% several times. This puts a lot of wear and tear on cells.

  Try to keep your load between 20% and 80%, while making only a FULL load + discharge cycle once in a great while. This preserves the overall longevity of the ability of the battery to hold a charge. In addition, the cooler you keep the laptop, the better for the battery as well.

• Mouse and multimedia keys does not work without the fn key

  Lenovo G500

  model without 20236

  Windows 7 sp1

  the mouse and the multimedia keys does not work without the fn key. Help, please

  [Original title: Lenovo g 500]

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/ I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Have not used the optical drive in age... tried to install the game today but the disc would not go? (51 X, 2012)

  Usually, when I put a disk in it gets pulled. I tried to put a drive in today and he got all the way to the edgeand did not in...

  I pressed eject I heard strange noises in plastic or something. I am sure there is no other DVD or CD because I only have a few games on disk, and they are all in their case.

  Is something wrong with the optical drive?

  Help please :D

  I opened my PC the other week to clean my graphics card and ram sticks etc. I got the hard drive or optical drive.

  The game disc works on other PCs, so it is not the disk.

  I also tried alienautopsy and he asked a disk to put, but I can't place a disk in because of the problem. :(

  Thank you!

  EvoGG

  I tried to put a drive in today and he got all the way to the edgeand did not in...

  ... I pressed eject I heard strange noises in plastic or something.

  It seems that it is powered. Sounds like the drive mechanism is defective (mechanically... internally).

  You can try in another computer, or temp. install the right drive on this computer... see where the problem follows.

  From the BIOS, there was also diagnosed with AIDS (PSA/ePSA).

  If you want use it. If you need help, hire a PC tech.

• Apex can work without the oracle application server? How?

  My question is exactly what the title says.
  
  Apex can work without the Oracle application server?
  
  I heard that there need a webserver to work but not necessarily the oracle application server.
  Is this true?
  
  With ONLY apache installed apex can work on it?
  
  Thank you
  
  
  
  Don't forget to assign points to those who help you! (Mark the thread useful/correct)
  My home page
  
  Best regards
  
  Published by: Igor Carrasco on May 29, 2009 14:59
  
  Published by: Igor Carrasco on May 29, 2009 14:59

  Hello

  Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).

  http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm

  But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• ? I have Adobe Photoshop elements 12, my computer crashed and I bought a laptop without the DVD disc, how can I install my product on my new computer?

  ? I have Adobe Photoshop elements 12, my computer crashed and I bought a laptop without the DVD disc, how can I install my product on my new computer?

  Download/install and use your serial number of the disc to activate it.

  PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

• Age of Empires 2 cannot host the game with Windows 7, Server networking DirectPlay

  I recently installed Age of Empires II: The Conquerors Expansion on Windows 7 Ultimate RC1 at home.

  This game does not work on Windows 7 with some work. First color is screwed up because it runs using 256 colors. Killing the task of 'explorer' in the Task Manager, while the game is running fixed that.

  My new problem is that I can't host a game in network on Windows 7. I've done some packet sniffing and I think it has to do with Directplay Server does not properly.

  According to Wikipedia

  • In Windows Vista , DirectPlay has been deprecated and DirectPlay Voice and NAT Helper of DirectPlay have been removed.

  I can join Games hosted on a Windows XP with Windows 7 machine, but I'm not able to host my own games.

  At work, we all use Windows 7 to play after hours is not possible because we do not have an XP machine to host the game.

  How can I me Directplay specifically Directplay Server run on Windows 7?

  I tried AOE2 running in Compatibility Mode for XP SP2 as it as an administrator.

  Kind regards

  Joey

  If, after upgrading two machines Windows 7 Beta to Windows 7 Professional Retail, I managed to get the machines to see after turning off UPnP on the router. I guess AOE2 is the ad itself and the router it's treat as UPnP.

• Make editable no editable regions without the original model

  Hi all

  I am designing a new Web site. I created a Web page and it is a model with editable regions so that future pages would be easy to make (the parent Page). However I completely replaced the model with which was suppost to be a new model and record not relising it is the main model for my site. So to sum up, he went and is irretrievably. I have child pages of the template, but these have no editable regions and I want to make editable again so I can save it to the file of the original model so it becomes the model.

  How to make a child page's parent page or remove the editable regions without having to redraw the entire page again?

  Any help will be appreciated.

  Thank you

  I guess that there are several ways to achieve this. So here is my work flow.

  I load the child page in DW and then click on change--> models--> detach the model and I have an editable document.

  GRAMPS

• I can't get my game controller dual action of logitech to work on the game modern warfare 2

  It is recognized by my computer. It calibrates and runs on computer games.

  Hello heclaimsane,

  1. the game controllers work normally on your computer when you use the keyboard?

  I see that there are known issues with the game controller and the game Modern Warfare 2 controller. I see that some users were able to solve this problem by creating new profiles of games. However, I suggest that you post your question on the support forum of Logitech for a better answer to your question. Here is a link that you can follow to ask your question:

  http://forums.Logitech.com/T5/PC-gaming/BD-p/PCGaming

  You can also check the thread below in which the users speak the same question:

  http://forums.Logitech.com/T5/PC-gaming/call-of-duty-modern-warfare-2-gamepad-problem/TD-p/401323/page/6

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• Graphics ATI DV7 - 4087CL Pavilion does not work on the games! and on windows. Only Intel HD

  Hello everyone, I have the problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit and all drivers are updated and special ATI AMD Radeon LAST. After installation too, I can't play 3d games or whatever the game with my ati.

  DXdiags also said INTEL HD not ati amd...

  What solution have with this and how im taking all the power of the laptop because is very slow with intel

  Concerning

  Arkadios

  Hi @arkas

  Welcome to the HP Forums! I see you're a few graphic problems. Did you install the ATI driver on the AMD website? If so, that's the problem. You have switchable graphics, which means that you have two video cards. The Intel card is designed for your treatment of basic graphics every day while the ATI card is designed to handle most of the work. Switchable graphics drivers are configured by the manufacturer of the laptop not the manufacturer of the graphics card.

  I suggest that you install your AMD HD graphics driver and your high-definition Intel Graphics Driver. If you need more information on the switchable graphics this document HP Switchable Graphics on laptops equipped with Intel and ATI GPU.

• Games for windows Live does not work on the games?

  Hello

  I bought guerrilla red faction 2011 on steam. I did the installation of clicked cloth expected to download then when I got round to play, he said Xlive.dll is missing from you're computer re install the program can solve this problem. But anyway this isn't why I ask this question when I enter my windows live game isn't on the game I press home nothing happens so I can't save my game it says when I click on play on steam, it is said that its installation, but it does nothing please help I love this game into pieces! :(

  Many old games install an outdated version or GFQL.
  Try to download and install the latest version of GFWL-

  Download: Details games for the installation of software for Windows 3.5 - Microsoft Download Center - Download

  Support stuff more GFWL.

  Games for Windows - LIVE: Support Documents

  "When I enter my windows live game isn't on the game when I click on the game on steam, it is said that its installation, but it does nothing.

  Don't know what you're saying.
  -"When enter you your game;
  This would indicate that the game is installed, Yes?

  -"When I click on play on steam it says that his installation--
  While the game may have installed does not mean that Steam will allow you to play again. Almost always fixes/updates Steam games (even solo) before it will let you play.
  It is the same for the Steam Client. They tried to make updates at different times, and you have
  Let him do what he wants.

  -"I press home nothing happens so I can't save my game it says.
  You can usually save a game without logging in GFWL, but when you can't.
  or do not want to access GFWL online, it will not save your progress and stats on your online GFWL
  account for everyone to see.
  When a game when steam is offline, you can not connect to GFWL being GFWL
  a line only "Star".

  For more information, try medium Steam-
  Knowledge Base - Steam support
  .