can we organize 1 tile vmmark test with just mail server set up inside
I had 1tile configured with any mail server and configured standbyvm and it gives me error for other vm (olio and dv2 store). I would like to know we can configure rul vmmak 1tile configuration with any mail server it contains.
Yes, uncomment and change the variable WORKLOADLIST in your VMMARK2.config file, you can specify what you want to run workloads.
It would be for any email server and standby.
WORKLOADLIST = 'mail server pending. "
You can do the same for the infrastructure via the INFRASTRUCTURELIST variable so workloads. See the corresponding text in the VMMARK2.config file or the guide of evaluation of the performance for more information.
Tags: VMware
Similar Questions
-
How can I print a list of contacts with e-mail addresses of Windows Live Mail?
How can I print a list of contacts with e-mail addresses of Windows Live Mail?
For an easy way and by using less paper, try this:- Open a new message window.
- Click on the button to.
- Select all addresses and add them to the field to.
- Close the message without sending it to save in drafts.
- Click on the header of message once to highlight.
- CTRL + F3 will reveal the source of the message, including all of the names and addresses.
- Copy & paste the addresses into a word processing program and print from there.
-
Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?
The AP521 can be configured for authentication WPA/TKIP with no radius server?
the datasheet, wpa with tkip and wpa2 with aes are supported.
you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.
-
Outlook express hangs after the connection with the mail server
OE6 hangs after the connection with the mail server?
Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.
Try to delete the account, compact the folders and close OE and reopen it and add the account back again. Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).
You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).
Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.
Steve
-
I installed AVG 9.0 and now I get the MSN Explorer pop next message.
You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.Sure. Analysis of your e-mail anti-virus program:
- Can slow to receive and send messages, or even fail.
- Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
- Is not necessary. If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.
Here are a few web pages accurately:
Why you don't need your anti-virus program to scan your e-mail
The other threat email: the Corruption of files in Outlook Express
Why some antivirus software can change the settings in e-mail programs
Email scanning - advantages and disadvantages -
Troubleshooting performance problems with the mail server on the virtual computer
I have a virtual machine with a mail server installed on a windows OS. But all of a sudden, my clients on the server response times decreased significantly.
This could be the cause of this problem?
It could be to do with the network, storage, or resources, but I don't know what steps I could take to determine faultWould someone mind helping me with the steps I could take to solve this problem?
Thank you
The below document page 20 and 21 accurate meters, you should look at the virtual machine level.
http://www.VMware.com/files/PDF/Exchange_2010_on_VMware_-_Best_Practices_Guide.PDF
These counters can be used for any virtual computer not only Exchange. If you are familiar with ESXTOPs I believe that the best way to deep dive in the diagnosis of performance problems. Also here is a link for these parameters.
This link takes you to http://communities.vmware.com/docs/DOC-9279 which has the description on the stats.
-
Outlook express crashes when connecting with the mail server
Outlook express 6 crashes when the connection with the mail server, please advise, thank you!
Try to remove your e-mail account and then close and reopen OE and then add it back again. Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3
Steve
-
How can I organize circles in a space with given minimum spacing?
How can I organize a round object in space with illustrator?
Look at the picture I did (with paint lol)
Suppose for example that I have 12 3 circle of different sizes and I want it auto-disposes in a square, but with a space in between to 1 mm, how can I do this?
[IMG] http://img543.imageshack.us/img543/6379/circles.PNG [Line] [url]
In artificial intelligence, there is no technical Acting to do what you're going to achieve.
You will have to do it manually.
-
Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.
Hi Gary,.
Thanks for posting in the Microsoft Community.
The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
How can I block the SMTP for all users but mail server
I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)
Thank you
___________________________________________________
6.3 (1) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
names of
name 172.16.4.10 pdc
name 172.168.4.11 llc
name 172.16.4.11 ftp
object-group service E-mail tcp
port-object eq www
EQ smtp port object
object-group service tcp - udp terminal
3389 3389 port-object range
object-group service mw tcp - udp
Beach of port-object 367 367
radmin tcp service object-group
RemoteAdmin description
4899 4899 object-port Beach
object-group service mw1 tcp
Beach of port-object 367 367
access-list 101 tcp refuse any any eq smtp
access-list 101 permit tcp any host object-group x.x.x.251 terminal
access-list 101 permit tcp any host x.x.x.214 object-group radmin
access-list 101 permit tcp any email host x.x.x.207 object-group
access-list 101 permit tcp any host x.x.x.212 object-group mw1
access-list 101 permit tcp any host x.x.x.211 eq ftp
sheep ip access-list allow any 192.168.101.0 255.255.255.240
IP address outside x.x.x.194 255.255.255.192
IP address inside 172.16.2.1 255.255.0.0
IP verify reverse path to the outside interface
IP verify reverse path inside interface
alarm action IP verification of information
IP audit attack alarm drop action
IP local pool mypool 192.168.101.1 - 192.168.101.20
don't allow no history of pdm
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 0 access-list sheep
NAT (inside) 10 0.0.0.0 0.0.0.0 0 0
static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0
static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0
public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0
public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0
"REM # 172.16.2.13's Exchange with Outlook Web servers #
static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0
Access-group 101 in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1
enable floodguard
Sysopt connection permit-pptp
VPDN PPTP-VPDN-group accept dialin pptp
VPDN group PPTP-VPDN-GROUP ppp authentication pap
VPDN group PPTP-VPDN-GROUP ppp authentication chap
VPDN group PPTP-VPDN-GROUP ppp mschap authentication
VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40
VPDN group VPDN GROUP-PPTP client configuration address local mypool
VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6
client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc
VPDN group VPDN GROUP-PPTP pptp echo 60
VPDN group VPDN GROUP-PPTP client for local authentication
VPDN username * password *.
VPDN allow outside
This is your problem:
Access-group 101 in external interface
You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.
To prevent users from going out, you will need this:
access list permit tcp host exchange_IP OUTPUT no matter what eq smtp
access list tcp OUTPUT deny any any eq smtp
Access-group interface inside OUT
See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.
-
Here are the details:
I have Windows Mail installed on my PC and you want to add an e-mail account. The issue started when I was trying to send a document I had picked up on a website and received an error message there was a problem with POP3. Then, I tried to set up an e-mail account and after that following instructions was puzzled because I didn't know the name of the exchange server. I am running Windows Vista on a Compaq Presario.
I first contacted my internet framework, which is Charter Communications and they referred me to Microsoft, which, in turn, was told to contact Charter Communications, call the Compaq or come to this site. At this point, I'm a little frustrated.
Hello
If you are tring to add an e-mail account in Windows Mail, you get the settings from your ISP (Charter Communications), then follow the information from Microsoft on how to implement.
You need the Charter:
1. your username with them
2. your password with them.
3. incoming for them mail server.
4. the outgoing e-mail server for them.
Charter e-mail settings:
http://www.myaccount.Charter.com/customers/support.aspx?supportarticleid=1417
Then follow the steps to set up Windows Mail:
"Windows Mail: setting up an account from start to finish.
See you soon.
-
A few years back, I bought for FSX acceleration expansion pack, but (I'm not kidding) would you believe it, I left it on your shelf tipped in the earthquake of February a few years back (I live in Christchurch). If the drive broke, but the product code was still written on the broken case. So is there somewhere I can download the installation program and then enter my product to a valid installation code?
Hi Kiwi, glide
Thanks for asking the question in the Microsoft Community forum.
From your description, I see that you have lost Flight Simulator disc and you want to get a replacement for this drive.
I suggest you to contact support for Microsoft Flight Simulator to improve the assistance on the issue:
http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx
http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx
Hope the above information is useful, if you have any question back to us, we are happy to help you.
Thank you.
-
Has anyone tried a VMMark test with a virtual machine that is used to manage the cluster storage?
I have several hardware solutions, I am unable to run VMMark because they contain foreign to the workload Vms(for storage). ClusterVMapping .txt reports an incorrect number of virtual machines in the tiles, which is what I expected.
Is it possible to exclude these virtual machines in the vmmark2.config?
Hello
You can disable the cluster mapping by editing the file VMMARK2.config and uncomment then by setting "DoClusterMapping = 0".
-
I can't Adobe Business Catalyst. When I publish my site to my testing with Adobe Business Catalyst site, I have a message that says that my Adobe ID access has expired, check your network connection. What is going on?
Hello
Please try to connect on Muse and sign again to make sure that Adobe ID and ID BC are synchronized.
- To disconnect Muse, click Help > Sign Out
- Muse of output
- Revive the Muse and sign in with your Adobe ID.
- Publish again to check if it works
If the problem persists please let me know.
Concerning
Vivek
-
How do we reuse the vmmark test environment?
Dear Sir.
We have built a VMMARK test environment and completed the test on my dock.
If we want to run the test on another platform, should rebuild us a VMMARK test for the new platform environment?
We had tried to leave the new platform to connect to iscsi of the old platform, but we have not found any virtual machine on the new platform.
If so, should reinstall us all the tiles on the new platform?
Could you give me some suggestions on this?
Thank you!
Hello
If you have attached storage even as what was used previously, and storage is visible to the new ESX host, then you will need to just 'register' the VMmark VM on the new ESX host.
One way to do this is through the Virtual Infrastructure client.
1. connect to the new ESX host.
2. click on the ESX host name (if necessary).
3. click on the configuration tab.
4. click on the storage option.
5 you should now see the storage that you used previously. Right click on the name of the storage and choose "browse the data store.
6. search for the virtual machines that you want, within their individual records must be an individual named "vmx" file Right click on it an choose "add to the inventory.
That's all. Remember to recreate your vSwitches as you had on the previous ESX host.
Finally, if you use ESX (not ESXi) you can do this via the command by navigating to the same folders and running line "vmware-cmd - s register Handy if you want the script operation.»
Maybe you are looking for
-
How can I remove the unnecessary language packs?
In paddling long, I found myself with four French language packs and in all my English (my mother tongue) navigation, the French packs take precedence on the English, AND they are 4:1. I want to reduce it to one language pack French contemporary that
-
When I click on "Tools"?
Hi, I can't access my gmail account and firefox 'aid' informs me I should turn my cookies by clicking "Tools". where?
-
How can I change the letter of a device when it is not an option?
I recently bought a WD My Passport Essential 500 GIG hard, and the problem is, I plugged on an Apple Macbook and added all my Itunes Music on the hard disk. Then from there I connected on an Asus laptop, running windows XP. I was wondering why it w
-
Enry Point on Storm application error
I spent some time getting my application to work correctly with multiple entry points. After the articles, I have now a main GUI application and also an autostart module which, among other things, updates the main icon. I use the technique of the c
-
Installation of Windows 7 Can I use a disc of Windows 7 operating on a second computer if I uninstall it the first computer? Thank you!