Can you rules of breakdown on a monitored host host?

Similar Questions

• Can you have v4.1 and v3.5 hosts in the same cluster?

  Can you have v4.1 and v3.5 hosts in the same cluster?  Before that I have to try, I thought I would check.  It would be only temporary until all hosts are upgraded.

  > Yes, 3.5 and 4.1 can coexist.

  But they can be managed vcenter 4.1 only, and you must leave the old license server for 3.5 hosts.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Can you run various NUMA parameters on ESX host?

  Hi all

  We are running ESX 3.0 and have experienced a problem with some our fair virtual servers randomly close I googled the error message displayed in the case where newspapers that lead me to the article below in the VMware KB.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 10213

  This article is about the exact message we receive, so I am confident that its troubleshooting procedures should work as we run the NUMA architecture in our environment, but I have a question before the change of management being curious to know a bit more information regarding hit her on the effects of his settings of NUMA in our environment.

  That's why we have taken two ESX hosts in our environment, my question was the following can I make NUMA changes on an ESX host and then migrate (if they aren't already) servers that have had the shutdown problem random overall to the ESX host that has the correct settings of NUMA as detailed in the article above?

  If any of you out there have done this before? If so is there any bad shot on the effects that I should know about? Any comments or advice you can give me on this would be greatly appreciated! Roll on the migration to VSphere 4.0!

  Thank you

  Nick

  Hi Nick,

  That's why we have taken two ESX hosts in our environment, my question was the following can I make NUMA changes on an ESX host and then migrate (if they aren't already) servers that have had the shutdown problem random overall to the ESX host that has the correct settings of NUMA as detailed in the article above?

  No Yes No problem with that. The VM themselves are not aware that they are running on NUMA hardware, so will not notice. The bug is because the vmkernel does not release memory properly when a virtual machine gets on demand on one NUMA node other than that which has been started the. Configuration Numa.MonMigEnable effectively disables this behavior at the host level, but this does not disable the advantage of NUMA so you may notice a performance decrease.

  Not sure of your patch levels, but apparently it was 'fixed' with this patch: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2066306

  Kind regards.

• Can you help me change my rear monitor screen orientation?

  While the resolution of a problem with my wireless keyboard, I somehow changed my monitor in portrait and landscape orientation can not figure out how to reverse the process. Meanwhile use the monitor on its side, which shows only half a screen at the same time as it is a widescreen 17 inch flat TFT LCD.

  Try holding your ctrl + alt + up arrow at the same time or right click on your desktop, Graphics Options, Rotation, your monitor, Normal.

• Can you have a cluster with a single host?

  Hello

  I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location.  They will all be managed by server unique vSphere.

  It is possible that the second site can earn an additional ESX host at some point in the future.  So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host?  Is it possible to have a cluster with a host, and what are the consequences of this?

  Thank you

  Joe

  Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.

  And, both from a technical point of view, but especially from a point of view BAU.  Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.

  From a personal point of view my current client runs a number of single-node clusters, in their environment.

• Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

  Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

  Hello

  Can't find the official specs of HP. But since the following specifications

  |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

  There

  Ports:

  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x HDMI
  • 1 x VGA
  • 1 x jack Headphone-out/microphone-in the drop-down list
  • Multi format card reader

  Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

  Kind regards.

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• I played "Mahjong Trails" and in position # 3. He played last night and I just tried a few moments ago and I come in. Can you tell why?

  Hello

  I played "Mahjong Trails" and in position # 3. He played last night and I just tried a few moments ago and I come in. Can you tell why?

  I've struggled since Facebook has said that someone tried to enter in my accouant and they had me off facebook about 3 days. Who would have something to do with it?

  Impatient of solve you this problem, because I REALLY don't like this game.

  Thanks for taking care of this

  hope that I broke all the rules. and I hope that I chose the right forum because I've NEVER done this before.

  original title: GAME MAHJONG TRAILS Can t PLAY WHY

  Hello Shirley,

  This isn't a problem with MSE.  You deal with Facebook on this (as hard as I know what to do).

  There is an excellent chance that what has happened to your account either interfered with your game or was not completely fixed or there is something else wrong with your account or maybe the game.  Your best bet is to start here: http://www.facebook.com/mahjongtrails#! /help/? section = applications_and_websites and see if you can get help any with the game or the other answers predefined or by searching.  Then, would be to try general help: http://www.facebook.com/help/?topic=applications_and_websites#! /help/? tab = discussion where you can post questions about your problem.  If possible, I try to uninstall and reinstall the game (even if it make you lose your points or your rankings) - or you can ask for help from their first that they are able to help.  Or open a new facebook account in the meantime and see if you can download and play the game on this account.  So not only will you be able to play, but you will know for sure, this isn't a problem with your computer, the game, your browser or malicious software.  You can pretty well and nail down to a problem with the other account or installing the game on this account.

  It is almost certainly a problem with Facebook and not your computer, malicious software or your browser.  You need to deal with them on this subject.  If you have the best technical support coordinated because of your recent problems, by all means to re-open the case, or get help that direct contact is all but impossible here trying.

  I'm sorry, we can not help you more, but it's really a matter of Facebook and you need to deal with them to resolve the issue.

  Good luck!

• Recently the removed Windows defender malware, but I don't want to lose access to the "real MSD. Can you offer any suggestions?

  Recently the removed Windows defender malware, but I don't want to lose access to the "real MS Defender. Can you offer any suggestions?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Can I use to connect to the monitor external hdmi

  Can I use the HDMI port to connect to an external monitor while shooting video with my EOS 7 d? In addition, this monitor can be a 1920 X 1080 HD monitor? I would need to get a mini HDMI cable DVI, but want to make sure, that it would not harm the camera before trying.

  Thanks in advance!

  Hello HowardLane,

  Yes, you would certainly be able to use the EOS 7 d HDMI output to connect to an external monitor.  While a studio monitor is usually used because of their qualities of accuracy and calibration of color, any monitor with a HDMI terminal input would work.  This will not harm the camera.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• Can you tell me how do I know what I should delete to get as much space in a minimum of time?

  Original title: my disk space is so small that I can't do anything.  Can you tell me how do I know what I should delete to get as much space in a minimum of time?

  Not enough disk space

  Hello

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  You may want to transfer some data, images or documents on removable media like USB keys,
  External USB (my choice) or even CD/DVD readers (make multiple copies if the use of these).

  -----------------------------------------------------

  Info:

  System restore usually holds 15% of disk space and updates that are necessary for running computer
  consume even more. Backup - Options of recovery and even MS updates and those of HP, Dell
  or similar manufacturers use the space if your charging system. There are also overhead for the readers are not
  format to their maximum capacity.

  Where all my disk space? (Vista) - good writeup
  http://Forum.NotebookReview.com/showthread.php?t=167983

  Hard disk space Vista shrinking and reducing anomaly
  http://www.mydigitallife.info/2007/07/04/Vista-hard-disk-space-shrinking-and-reducing-anomaly/

  ----------------------------------------------

  It will show you how disk space is being used.

  WinDirStat - free - use to make sure you know what is too much space.
  http://WinDirStat.info/

  -Free - TreeSize tells you where precious space has gone to
  http://www.Jam-software.com/treesize_free/

  Also run Disk Cleanup:

  Start - All Programs - Accessories - System Tools - Disk Cleanup.

  Use the WinDirStat or TreeSize and these other tools.

  DiskMon - free - an application that logs and displays all the activity of the hard disk on a Windows System.
  You can also reduce DiskMon in your system tray, where it acts as a disk light, presenting a green
  icon when there is disk-read activity and a red icon when there is a writing activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896646.aspx

  Process Monitor - free - a monitoring tool for Windows that shows real-time file system,
  The process/thread activity and the register.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  Manage - free - a utility that displays information about the handles opened for any process in the system.
  You can use it to see the programs that have an open folder, or to see the types of objects and the names of all
  the handles of a program.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896655.aspx

  -Free - Process Explorer shows you information about the handles and DLLs processes have
  opened or loaded.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Sysinternals - many free tools
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  ---------------------------------

  OpenedFilesView - Free displays the list of all the open files on your system. For each file opened,
  additional information is displayed: handle value, read/write/delete access, position in the file, the
  process that has the file open and more...
  http://www.NirSoft.NET/utils/opened_files_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Download Safe for Windows Mrdia Center? I lost the guide, TV, Pinterest & all. Can you help me please?

  Download Safe for Windows Media Center? I lost the guide, TV, Pinterest & all. Can you help me please? 64 6,00 GB please help me! :(  And will I need to untnstall what I have now? I have it & think I was corrupted, so I want to see all the shows. Thank you!

  Internet TV was pulled from the product from 20 September if that's what you
  average. Be very specific about what lack us. Otherwise:
   
  Go into Control Panel configuration program and features, you will be able to activate Windows
  features on and outside. Disable the two Media Center and Media Player and restarting.
  Then turn on both. What is going on?
   
  You can also create a new user with administrator privileges and log out of old
  user and log on new user to rule out the possibility of corruption of the profiles.
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Can you connect U3014 DELL to the PS3?

  OK, I have the old dell 3007wfp 30 '. I tried to connect my ps3 to the screen via hdmi/DVI. It did not work. I can't play either any Blu - ray movie via computer on this screen.

  Now, in the next 2 weeks, I plan to buy the new U3014 from DELL. I'm still very happy with my old dell 3007, but I also want to connect to the PS3.

  My question is can connect you the new dell monitor 30 ' to the PS3 and it allows to play games? I mean that the new screen has the hdmi connection, so maybe it works with the PS3? Can you also use it to watch Blu - Ray?

  The naturalness of 2560 x 1600 resolution can prevent connection and using the PS3 and watch Blu - ray or he makes the adjustment of hd resolution?

  The only reason why I'd buy this monitor is if I can connect to the PS3. Can any representative dell or Dell U3014 help me?

  Hi Mary,

  Dell U3014 comes with HDMI output and you should be able to connect with the PS3 to play games. However, you will need to connect external speakers to "Audio output" to get the sound output as there are no internal speakers in U3014. The monitor is capable of resolutions up to 2560 x 1600 and should be able to play Blu - ray videos without any hassles. You can refer to the technical specifications of the monitor available in Guide user here.

  I hope this helps. Answer please if you have any other questions.

• Can you see the ink levels Eprint Center for the OfficeJet 7500 a/E910

  You can monitor the eprint Center ink levels for the OfficeJet 7500 a/E910?

  Hello Deborah,

  To answer your question, you are not able to check the ink of ePrint Center levels. The only thing you can do in ePrint Center is to monitor the status of your print jobs you send via ePrint and monitor the connection status of your printer for the recent servers ePrint.