Can you run various NUMA parameters on ESX host?

Similar Questions

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• can you run two separate vi in parallel

  Can you run two separate Vi in parallel? It will be considerably slower response?

  Here are some more details.

  Yes, you can them in parallel without any problem.

• You will need to run the script for some ESX hosts.

  Dear team,

  I m connected to 4 esx host, but I want to run the script only 2 esx host asking you to help me how to do?

  concerning

  Mr. VMware

  You could start the script with the cmdlet Get-VMhost to select only the two hosts that you want to output to. For example:

  Get-VMHost host1, host2. Get - VM

  Displays only the virtual machine running on host1 and host2.

• Can you have v4.1 and v3.5 hosts in the same cluster?

  Can you have v4.1 and v3.5 hosts in the same cluster?  Before that I have to try, I thought I would check.  It would be only temporary until all hosts are upgraded.

  > Yes, 3.5 and 4.1 can coexist.

  But they can be managed vcenter 4.1 only, and you must leave the old license server for 3.5 hosts.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Can you have a cluster with a single host?

  Hello

  I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location.  They will all be managed by server unique vSphere.

  It is possible that the second site can earn an additional ESX host at some point in the future.  So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host?  Is it possible to have a cluster with a host, and what are the consequences of this?

  Thank you

  Joe

  Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.

  And, both from a technical point of view, but especially from a point of view BAU.  Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.

  From a personal point of view my current client runs a number of single-node clusters, in their environment.

• Run the script on the ESX host

  Newb question...

  How to run a script on an ESX 4.0 host?

  I received a script in the form of a *.sh file I need to run on my host.  I have vCenter works... I can do through this?

  You need SSH in the host. Under tab VI client users click "Add a user" and make sure that check "shell to grant access.

  Then download a SSH client and install it on your desktop (installed by default on Linux/MaxOSX), a good Windows free one called PuTTY.

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY

  Use the username and password you created to open a session on the server. then type 'su-' (i.e. LESS known www.phdvirtual.com

• Can you rules of breakdown on a monitored host host?

  I know how to create a machine of the FMS failure, but I wish I could create immediate power outages of the fglam of the monitored servers. Especially for JavaEE officers, when we cycle servers, members of the team think always enter the FMS and the blackout of hundreds of sensors that will be generated when the cycling of our environment.

  To make it easier and add consistency to our process, I would like to be able to create and remove the power outages of Foglight Agent Managers running on remote machines of the FMS.

  Is this possible?

  Hello

  If you have an order of fglcmd for this power failure, you can run fglcmd from any machine.

  https://support.software.Dell.com/Foglight/KB/54570

  • Title

    Where can I run the fglcmd utility?

  • Description

    Can I run the utility fglcmd outside of the foglight Server?

  • Resolution

    Yes, you can run the fglcmd outside of the foglight Server utility.

    You must download the binaries from the Foglight Server FMS_HOME\tools\fglcmd.zip directory. Extract the file and run the command fglcmd. You must specify the srv-(which is the hostname of the foglight server) and - port (which is the port number of the web console of Foglight)

    Example below:

    fglcmd - foglight usr - pwd foglight srv - myfoglightserver-Annex: list of ports 8080 - cmd

  Hope this helps

  Golan

• HA can happen between a different version of ESX host

  I have two host ESX server, one is ESX 3.5 and the other is ESX 4, two of them are under the management of a VCenter server,

  I wonder if I can implement HA between the two ESX hosts

  Yes, this is supported.

  Elisha

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Can you run Firefox 21 rather than Firefox nightly on Windows 8?

  I was wondering if you can run the standard version of 21 Firefox on Windows 8?

  You can. However it does not support Metro on windows 8

• can you run two sessions of firefox, in privacy and confidentiality not in a mode

  You can run two Firefox sessions, one in privacy and confidentiality not in a mode.
  Basically, in chrome, I can connect facebook with 2 different account, I opened got chrome FB and login (account1), then I click on ctrl-shift-n and go on FB and login (Account2)
  Here, the question is, is it possible with firefox?

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• When I go to play a game, they are all lag and all fps are reduced. I'm going to can you run and it say is I only have 32 MB dedicated video ram.

  Some day its there I have a steam called civilization V gold edition game and now when I go to play a game that they all lag decreases all the fps I'll can run and he say, I have 32 MB of video memory dedicated when the game I play world of warcraft need 218 MB dedicated and before that happened im using Intel (r) of the hd 4000 chart how I have difficulty This im using a dell 8 17.3 core i5 window

  Original title: dedicated video memory

  Hi Nick,

  You may experience this problem if a graphics card driver is damaged or outdated. I suggest updating the graphics card drivers and check to see if it helps:

  The drivers can be found here;

  file ZIP 32-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22611

  file EXE 32-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22610

  64-bit ZIP file: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22652

  file EXE 64-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22605

  You have the possibility to change the graphics memory in the BIOS. You must go into the bios of the computer/laptop and see what are the options that it offers to the shared memory. If you don't know how to get there, check the documentation of the computer/laptop or from the manufacturer (Dell's Support). You can also find information on what are the maximum value of the shares.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• Can you run Flex Builder 3 and Flash Builder 4 side by side?

  I have what I want, it's a relatively simple matter. Society, I am currently working a number of Flex 3 projects on track to completion or in the last part of their development, phase, but we use SVN version control. It is my understanding that while you can use Flash Builder 4 to create and/or edit and publish Flex 3 projects, once you are using FB4 on a project from version control, anyone who removes this project svn will have to FB4 allows you to change the project. Assuming that is right, can get us FB3 and FB4 installed on our desktops and switch between them according to the projects we use? We hope our developers migrate FB4 they encapsulate the development on Flex 3 projects, but we might need developers working on Flex 4 projects to help on the stages of our Flex 3 applications. Just to clarify: we are both FB3 and FB4 executable running at the same time, just the possibility of close FB4 and launch FB3 and vice versa without going through error or compile questions. We use install it standalone FB, not Eclipse plug-ins, btw.

  Yes - to my knowledge, you can have FB3 and FB4 installed on the same computer without conflict.

  Each separate default version uses the workspace, as soon as you try not to share workspaces between both versions, you should be safe.

  -Chris

• Can you run Jolt via Firefox OS on a smart TV, via app or browser?

  Title

  Twitch.TV still requires Flash player for their current and new player. They seek to use HTML5 for video (which are already for controls and the cat) which can make it easier for devices that does not support the plugin of current Flash Player or at all.