CANCEL DOES NOT PROPERLY WITH DUPLICATE RECORDS

Similar Questions

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• High-end non apple headphones does not properly with iPhone7

  I just bought the new iPhone 7 and discovered that my ear Bowers & Wilkins do not seem to be compatible with my new phone.  The sound works fine but the microphone and stop working after a pause control more then a few minutes.  I thought it was a question of headphones, so I have replaced, but still the same issue.  So for example I connect my headset into the adapter (supplied by apple), launch my music application, press play on the phone and the sounds of beautiful high definition comes out.  I can then press pause on the microphone control, press a second time to play and it works fine as do volume adjusters.  However, if I press pause and wait a few minutes, the remote control on the speaker cable does nothing.  The sound still works if I hit 'play' and 'pause' on the screen.  As soon as I unplug the headphone jack and plug back in, the remote works again, until I pause for a longer period.  It seems to stop responding when asleep screen and pause mode.  I disabled the screen lock to see what is happening.  Now pause mode for more than five minutes, the remote works but the screen stays on!  If at this stage, I turned off the screen (paused).  Two minutes later, distance mic and controls do not work.  So certainly associated with iPhone screen go to sleep.  Does anyone else have this problem or the solution.  This problem will not occur on the iPhone from my friend 6.

  Apple is aware of an issue affecting the controls on the headphones by the port of lightning and working on a fix.

• Pavilion g6 2303sh 7650 Radeon graphics driver does not properly with Windows 7 (Code 43)

  Hi all

  I can't get my radeon card to work on a new installation of Windows 7. In the device manager it is a sign of warning on the name of the card. The camera has error code 43, but not other information on what might be wrong.

  I tried to reinstall the latest drivers AMD (not beta) at least a dozen times, but nothing works.

  Hello:

  Here is the link to the W7 x 64 driver which you are interested.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

  There is no W7 32 bit driver for the 7670M graphics card, then you must either install W7 x 64 or live with what you have now.

• lifecamVX-500 does not properly with Skype in Vista

  I bought this lifecamVX-500 and when I Skype Otherside they cannot see me also this side__My own photo get released as a picture

  Please let som one help me

  You mean no VX 500 VX 5000?

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  Fill 4 in drop-down menus in the above link > click on GO > download the correct software for it.

  See you soon.

  Mick Murphy - Microsoft partner

• microphone does not work with voice-dictation

  Original title:

  MIC problems

  My microphone does not work with voice-dictation in Win Vista. However, it does not work with Sound Recorder?  I went to the Hardwear and Sound but MIC is not yet in speaker properties so I can't make adjustments. Any ideas?

  Hello

  Thank you for joining Microsoft Community!

  The microphone does not work with voice-dictation.

  Quick questions:

  1. What is the brand and model of the computer?
  2 - is a built-in microphone?

  We will follow these steps and check:

  Method 1:

  Select Microphone, a default device.

  Follow these steps to do the same thing:

  (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

  (b) click on sounds, click on the recording tab.

  (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

   

  Method 2:

  Check if dictation is enabled or not.

  See the following links for the same:

  Turn on dictation for all programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• How can I cancel your subscription to Adobe? Because it does not work with me on the computer is

  • How can I cancel your subscription to Adobe? Because it does not work with me on the computer is
  • 
    

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Does not begin with satellite A350 - accident or failure of the motherboard BIOS?

  Hello, first of all, sorry for my English :).

  I have the Toshiba Satellite A350-13 model has and very big trouble with it: when I turn it on by the power button, power light begins to shine, I can hear the voice of the fan for a second - then it stops and I noticed that HARD drive starts to work - I can hear and see by flashing the lamp next to the lamp stack CD player also works, but nothing else happens. There is nothing on the monitor. It seems that the bios is not starting. Let me explain what I do when it all started. My computer worked correctly, but there was a small mess on my HARD drive, then I got the CD recovery system, I realized after buying computer. Everything was ok, the system is working properly, so I started to install my software. I didn't not uninstall this program installed at the factory for system optimization that is (I do not remember his name now, but I mean this program that shows you update for your drivers - I remember that there are updates for the recognition of faces, videos etc..) I installed all the updates that this program presents, including the update of the BIOS. When I've done with the installation of these updates, I noticed that my keyboard does not work - with any button.

  By the time windows has ended it is updated, so I went to "Relight system" in the start menu of windows of the mouse. Then the closed system itself, I saw that windows updates itself as there are always after downloading the updates, but when all this happened at the end and computer must turn off and turn back on, I saw white screen. Computer has not restarted while I was expecting a few minutes. I turned off the computer by holding down the button market / stop and play again. Then, he didn't get up and it's like that for now. What will happen? Is - it caused by the BIOS update I did? Or - is it possible that this motherboard fell down? I think this is connected with the bios, indeed with his absence :) But when I switch on the computer, the keyboard still does not - I can see it, because the green light should appear on the CAPS LOCK button when I hit him if there is a power, even if the bios does not work. Am I wrong? Is there any possible to return BIOS configuration of fabric? I'm quite confused, because I have that for two months - it is like new. I'm excluding the dysfunction of the monitor.

  I hope any of you had a problem like this and there is a possible solution for it. My computer is always guaranteed.

  > My computer is always guaranteed.
  That of the point! Please contact nearest Toshiba authorized maintainer and leave check your laptop.
  There is serious hardware problem, and I don't think you can do something.

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  Example of

  Stair machine 550 K/CAL

  Apple Watch 30 k/cal

  Hello

  During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

  More information: use of the application of the workout on your Apple Watch - Apple Support

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.