Cannot access camera through router
I'm trying to access my Linksys camera on the internet. Camera has a static IP address and is configured via a dynamic DNS service to work (TZO). Camera is set to port 1024 and the router is configured for port 1024 forward. A check of my shows that 1024 ports is open. When I run Traceroute on the address of my camera, it will work fine once. After checking once it expires again and again. If I reset the router, the same thing happens. I ping the domain name of the camera perfectly with no packet loss.
The camera works fine, the work of the DDNS service very well, the only variable view traceroute won't work once and then expire. This could be the cause of this error? Thank you.
When you try to connect to the camera, using the full URI, including the http:// prefix, AND adding the number of port... you should try like this:
http://your.domain.com:1024
Tags: Linksys Routers
Similar Questions
-
Lenovo program - T420 cannot access camera settings
I have a T420 and cannot access my camera, because I've upgraded to windows 10 and keep to said that I need the program setting of Lenovo, I found, but when I click on get the app, I find myself with just a white screen... I tried several sites and get the same thing... Any ideas on how to get the settings program
Moderator edit: added detail to the subject
Hi Cyprusbob and welcome to the Lenovo user community!
You have a ThinkPad parameters dependency installed?
http://support.Lenovo.com/us/en/downloads/ds104935
If you do not ' yet fact, take a look at the support page the T420 and make sure you have installed the latest Windows 10 drivers, or run ThinkVantage System Update.
I hope this helps!
-
Cannot access remote through Windows Live Messenger
During the years I helped my mother by remote access through Windows Live Messenger, but in recent days the small program that usually appears which shows two computers, try to connect are missing and I get the error message cannot display the page. If anyone has had the same problem and how solved you this problem?
Submit all Live queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Cannot access the BEFSX41 router Config page Win 7
Hi, I have a BEFSX41and am not able to access my router from any browser config page I have on my system. I use IE and FireFox and when I punch in the IP address for the router there is just there and about 30 seconds later, says that there is a mistake and that the connection has been reset. It is a 64-bit installation and I also have another computer that goes through the same router, is 32-bit and doesn't have this problem.
I added a NEW driver for my Realtek NIC and it still happens. Another machine that I have on my network ALSO has a Realtek NIC but can still access the router config page.
Someone at - it else here has the same problem?
OK, problem solved. I used a different IP and the problem disappeared, thanks for the help.
-
sites Web/flash cannot access camera xoom
Adobe Flash recognizes no built-in camera (s). When I try to connect my xoom to a video chat website I do not get the FlashDrive asobe familiar settings dialog asking me if I want to allow the site to access my camera and a microphone. Will flash I would like to receive the video, but won't allow me to send video footage.
If I try were:
or
http://www.sillywebcam.com/others/?demo=test-your-webcam
the Xoom does not give me the flash player settings dialog which is necessary to allow the site to take camera to my xoom from adobe.
and the second site gives me the message: "it takes a camera for this demonstration."
Is there a way to allow Web sites to access the photo/video camera feeds flash?
Thank you
Jim camp
Jim,
There was a gmanapps response that explains why the camera may not work through web sites, here are the other related thread:
-
Cannot access Internet through IE in the merging window (WinXP Pro)
Fusion VM loaded on my new MBook Pro with Snow Leopard. You can use Lotus Notes in a Windows environment. Cannot get mail, so I check if I can even access the Internet through IE in XP and voila, no access.
Ideas?
Have you checked the network adapter settings in the virtual machine? Try the NAT and connected by a bridge to see if you can get IE to open a Web site.
-
Desktop HP cannot access the wireless router
HP Phoenix
Product name: h9 - 1195dIt seems that he be blocked by the software of HP support.
I am connected via wireless but just can't access the router.
While a netbook of borrowing can access the router wireless without problem.
can someone help...
Great, thanks for posting!
Let us know if you have other problems.
-
Hello
My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?
Thanks in advance.
Hello @jerome256,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you are having a problem with your WiFi and wanted to help you!
You are trying to access WiFi through router? If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router. Check that the router is connected to the internet. If you have more than one router, then you can ensure that you are connected to the correct router. You can also try unplugging the router for about 30 seconds, and then reconnecting it. Please consult the following document, as it can help solve the problem for you:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
Cannot access the gateway/DHCP WS2012
Hi all
For some reason any Windows Server 2012 machine cannot access my gateway (router). I got a new modem/router ATT (NVG589) so I got rid of my dlink router DGL4500. For some reason my server cannot get an IP from the DHCP on the router (windows is currently giving a private ip address). The dlink gateway is 192.168.0.1, and the new is 192.168.1.254. I have tried to put a static IP address, flush the dns, set it to automatic and searched online, nothing seems to work. When I plug the dlink again, the server is able to get an ip address from it. Am I missing something that I must specially configured in the NVG589? or y at - it something on the server, I need to change?
Hello
For questions on Windows Server 2012 you can post your question to the TechNet forums. They will be able to guide you to the best.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
-
Cannot access my router through the Explorer configuration page
I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.
My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.
Thanks for any help.
Hi JBHPUser,
(a) other router configuration page, you are able to access other Web sites?(b) what operating system and Internet Explorer version do you use?This article can be very useful.You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
http://support.Microsoft.com/kb/956196You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
Solve problems with computers not appearing is not in the network map
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-mapNetwork connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Aziz Nadeem - Microsoft Support -
My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID
N °
but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)
-
Cannot access photos taken with camera assistant
I used the camera wizard to extract the photos from my camera digital polaroid i835. In the past I could simply access it through my computer by selective USB key on which the device has been connected, select the photos and copy and then sticking them to my pictures in My Documents. For some reason any today there was a problem so I used the camera Assistant. He did copy the folder marked polaroid in my images, but when I try to access it, the folder opens and the pictures begin to appear and then I get the error message that the application must close and then "send the error message' or 'do not send' I even tried to access it through safe mode by using the command prompt , but even if the files are listed using dir / p, when I try copy 154.le jpg (or polaroid 154.le jpg because he seems to be appointed) I get the message "file not found". If I try to attach a photo of this file to an e-mail message, the email app everything stops. If I try to open a photo from this folder in the paint, then paint stops. I spent four and a half hours trying to solve this problem. Unfortunately the wizard removed the files from my camera before I realized what was going on and that I could stop it to do. I think that the pictures are on my computer in the folder. I just can't access. In addition, the folder on my flash drive with old pictures recorded by copy and paste of this camera now allows the same error and I can't access those not more, although I already have. What could be wrong?
Thank you, Sharon BachPersonally, I think I would delete the problem of
the disk hard drive... looks like they are corrupt for me.Maybe you can recover files from flash drive
with the following free software:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Recuva - file recovery
http://www.Piriform.com/RecuvaIntroduction of Recuva (tutorials)
http://www.Piriform.com/docs/Recuva/introducing-RecuvaIf you try it... Please let us know the result.
Good luck...
-
Cannot access the internet (table routing and connection seems to be very well)
Hello
I have a problem that I can't know at the present time.The problem started after uninstalling cisco anyconnect vpn.Description:cannot access Web sites or even the router configuration panelcannot tracert beyond the first jump (router)can ping to ip Internet addressesrouting table appears to be wellAfter disabling all services additional error is always persistentcomputer is connected to the router cableSo, it seems that something is blocking the connection, but I can't understand what...It fixed to the help of netsh winsock reset catalog and restart...
-
WRT1900AC: Cannot access the router remotely
This can be a simple, but I'm scratching my head on it.
I just took a 1900 for my personal use at home. I did a basic auto config (Nothing fancy, just Plain Jane).
As part of the configuration process, I associated the router to a Smart Access account that is different from that assigned to the routers in my church.
For some unknown reason, I can not access the router using the Smart app unless I am accessing Internet through the 1900. If I have Internet access through my Verizon FiOS router, the Smart application tells me that my wireless router is offline.
I missed the 1900 and started from scratch using my office... again... combining the unit on the account. Once again, no luck.
I have a session with my smartphone and tried again with my tablet. Still no luck.
Just to make sure that there is no failure, I tried to access the routers of the Church... and has been able to do without any problem.
Y at - it an option that I forget? I don't remember running into this situation when you configure the 6500 s and 6900 s.
10,168 is also a private IP address.
I recommend that you enter this address that you see on the WRT router in DMZ ISP modems. If there is a reservation on the ISP modem function, book it as well so it can't change it later. This will keep the DMZ address for the WRT router and you should be good here.
-
WRT110, Vista, wired desktop cannot access utility based on the router's web
Computer Vista hard wired to the WRT110 cannot access the router. But it CAN get to internet and CAN ping router without losses. The XP machine is wireless, can get internet and CAN ping router without losses, but also can NOT access the router page. Ipconfig displays 192.168.1.1 is the correct default gateway address. Yesterday, I had to reset the modem to access the router and had to enter all the parameters. Could access router yesterday but can't today. The IP address is valid from yesterday to tomorrow. I don't understand what has happened to prevent access to the router. I even unplugged the modem to the router and still cannot access router today. I can't find this problem in the forum, hope this isn't a duplicate request. Thanks for any help
I have NO idea why, but I can access the Web with IE8 installed utility pages. Has absolutely no sense to me. Of course, it must be some kind of safety but my IE use medium-high settings, so I can't imagine what passage of IE7 to IE8 did indeed these parameters.
Happy now that I can access these pages, finally. Hope this helps someone else.
Maybe you are looking for
-
NI PXI - 8361 PCIe card not detected
Hello community, I'm trying to mount this PXI system and running on a computer that is running Windows 7 Enterprise 32-bit. We already have a system running on another computer running Windows XP 32-bit. Chassis OR PXI-1036 OR PXI-8360 controller con
-
Bluetooth Serial Port (SPP) on the XOOM profile
Does anyone has experiences using devices to profile serial port with the XOOM? We try to get our through SPP Bluetooth barcode scanner and we had a few problems with the matching. We are able to pair our device with the XOOM did very well (using Blu
-
See above
-
How can I download only specific folders in the source email online
For example, I want to only download from my gmail Inbox, not every file I have on gmail.
-
2008 T60 - HK4 to Win7 XP update
This T60 2008 - HK4 has the Intel Core Duo T5600 and ATI Mobility Radeon X 1300 graphics card. I have the Win7 Pro retail pack update that says that this upgrade must be done as a clean install. I visited the Lenovo site and picked up that many pil