Cannot access CF 9 administrator to complete the installation on Windows 7

Similar Questions

• Satellite L750 - cannot complete the installation of Windows

  Just bought new computer initial sart upward and installing Windows.

  Get the loop of the error. "The computer started unexpextedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart, then restart the installation. Whenever I click ok to install Windows error reappears.
  Cannot install Windows.

  Maybe the computer back and get a new one?

  Hey,.

  You can already access the Windows Advanced Boot menu and start the recovery of disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Otherwise I agree with and you must return the phone and ask for a replacement. These things shouldn't t generally occur on output from the computer to the box. I m sure that the store will replace it for free. ;)

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Complete the installation of Windows 7. Says key code does not.

  New hard drive so I had to buy a new windows 7.  The installation is not complete as it says that the key code is wrong.  This is the code that is sent with my bill payment.  Have lost more time on a charge of Apple.   New HDD Hatchi on Toshiba laptop.

  If your hard drive has failed and your Tosh was origonally provided with win7 preinstalled that you had failed the recovery disks according to the instructions of Tosh all that you had to do was support Tosh calls asking the recovery disks.

  From whom you purchased win7?

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• Cannot complete the installation of windows media center. IR receiver undetected.

  Hello, I have a card Hauppauge WinTV HVR 1950 USB and you want to use with windows media center to watch and record tv. My setup is that the card is connected to the digital receiver via composite cables. It has a remote control and an its own ir blaster, but apparently that is not good enough for media center. Is there a way to bypass the verification of ir receiver so I can watch and record tv in media center? I have windows 7 Home premium 64-bit. Thank you.

  Savan, without receiving cable and IR blaster (not to mention the guide of)
  the provider) Media Center will not be able to change the channel on the set top
  box to record TV. And he will need the guide its supplier to plan
  records.
   
   
   
  The game, December 23, 2010 09:41:51 + 0000, Savan H wrote:
   
  > Go back to Windows Media Center put in place since then and try the procedure below
   

  Barb Bowman

  http://www.digitalmediaphile.com

• I'm unable to complete the installation of Windows Vista. At the end of the installation it says "winload.exe is missing or damaged.

  Hi my name is Corey and I have a huge problem. I have windows xp media center edition and I cant' install windows vista. When I turn on my computer with vista DVD inserted, it starts very well. When he arrives at the end of the section "Windows loading files", I get an error saying winload.exe is missing or damaged. OMG! what I'm doing. Help, please!

  PS: I meet well above the requirements for vista.

  original title: PROBLEM of INSTALLATION of VISTA! WINLOAD. EXE, MISSING OR DAMAGED

  Hi xXCAS93Xx,

  Thank you for using Microsoft Vista answers Forums.

  ATTENTION: make sure that u save your file before the following steps.

  Here are a few rare to get this problem is resolved.

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency and a keyboard or another input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click Startup Repair.

  7 restart the computer.

  For a complete statement on another option on how to resolve this problem, see this link

  http://support.Microsoft.com/default.aspx/KB/927391

  Please let us know if there is need help or if this solves your problem.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Firefox 16.0.2 not completing the installation under windows 7 and keep doing tests of compatibility of modules and asking me if I want to send feedback to Mozilla

  It works as if it were the first run after update. The point is that it never ends. After each launch it going tru the whole cycle as if it were installef for the first time.

  I used the tool 'reset the firefox' under 'Help' and, after two cycles of launch, it stops the weird behavior. Thank you very much for your reply Cor - el. I think that under a way not channeled, the mentioned tool interpreted some procedures that you propose.

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Finish the installation of Windows after the restoration is not possible

  Hi, I have a problem with my laptop.

  All of a sudden the keyboard reacted as the SHIFT key is down. When I insert a cd I don't have the name of the file under the icon and firefox lost my favorite pages. I ran antivirus scans, but nothing came. so I decided to do a system recovery. Now on the first page, I have to do next to complete the installation of windows, I click on the next button and it is clicked. I'm on the first page and my laptop is out of use. can you help me please?

  thanx

  Theo

  Hello

  Well, Stefan has suggested that the recovery CD is corrupt, but for me it s does not erase if you used a recovery CD or the Microsoft Windows CD.
  What did you use?

  I think that the recovery CD should be corrupted and it works without any problem.
  You format the HARD drive correctly? Otherwise, do it first and delete all partitions and try reinstalling the operating system.

• Insert the disc of Service Pack 2 (sp2) request the installation of Windows XP

  I am trying to install a fresh load my Windows XP, but for some reason any at his request for a disc of service pack 2 must be inserted during the installation.  I installed XP a few times, but don't remember invited to insert a disc of SP2.  Does anyone know how to get around this problem? or to download sp2 and install it on a disc that would work?

  Hey, Dan, Mich,.

  Thanks for posting. This error appears usually when you perform a repair of XP installation and media does not correspond to what the current version of Windows on your computer.

  Please try the installation with the following steps. Please note EasyForYou will erase all data on the disk.

  A new installation is to remove all data from your hard disk by repartitioning and reformatting your hard disk and reinstall the operating system and programs empty (clean) hard disk. For more information about important things to consider before you partition and format your hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click on the number below to view the article in the Microsoft Knowledge Base:

  313348 (http://support.microsoft.com/kb/313348/) how to partition and format a hard disk in Windows XP

  To perform a new installation of Windows XP, follow these steps:

  1. Back up all important information before you perform a new installation of Windows XP. Save the backup to an external location, such as a CD or external hard drive.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

     Note To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  3. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.
  4. In the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft software license agreement, and then press F8.
  6. Do not press R for repair anywhere on the system.
  7. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  8. Follow the instructions on the screen to complete the installation of Windows XP.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows cannot complete the Installation in Mode safe

  Hi, I have a Packard Bell with Windows Vista laptop

  The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
  I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
  Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

  I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
  Or y at - it another way I can complete the installation?

  Thank you very much

  Hello

  you have little choice

  1. attach the graphics card

  2 and contact the manufacturer because it is their recovery process, NOT microsofts

  you already know that you can not complete the process of recovery of manufacturers in safe mode

  and we cannot help you with their recovery process

  good luck with it

• Windows cannot complete the installation in safe mode

  I really need a help.

  I just bought a samsung series 5 ultra-thin with AMD and windows already installed sound 8.
  And suddenly my laptop was showing a notification to the black screen that says: "Windows is unable to complete the installation in Mode without failure. To continue installing Windows, restart the computer.
  There was only the OK button. And after I press the OK button, my windows will restart and keep showing that the notification. Even I try to turn off my laptop with power button / stop, its still impossible return to normal mode.
  The windows keep again and again, reboot
  Anyone know how to get back to my normal mode? Please help me.

  Hello

  I just realized that you cannot start to access msconfig... I'm sorry.

  If you have a Setup disk, repair disk or USB flash, you may be able to access the command prompt and enter a command to disable Secure Mode...

  You have a possibility to do a repair on the POST screen before Windows tries to start...

  You may be able to quickly hit Ctrl + Alt + Delete at the end of the POST right to start an auto repair.

  It might take three tests...

  You must get to the command prompt (.cmd)

  (1) start from the Windows 8 DVD or any other method available...

  Steps 2, 3 and 4 may not be in order, depending on how you start...
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  This link gives instructions on what to do when you receive a command prompt...

  http://www.bleepingcomputer.com/forums/t/423290/Windows-7-boot-to-safe-mode-reboot-loop/

  The statement to the command...

  /deletevalue {GUID} safeboot bcdedit where {GUID} is Windows 7 loader GUID.

  {GUID}   refers to the "identifier" listed under a Windows boot loader that appears after entering bcdedit/c.

  In their example, entry to the so command prompt...

  /deletevalue {96378fc1-9402-11e0-990d-e3ec25d51f78} safeboot bcdedit