Complete the installation of Windows 7. Says key code does not.

Similar Questions

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Cannot access CF 9 administrator to complete the installation on Windows 7

  Hello

  I hope that if anyone can help. I tried to get this to work for days now and online have sought solutions, without success. I recently got a new Dell laptop, running Windows 7 Professional 64 bit and install CF 9 64 bit. After that specific instructions following, I found in various places online, I went through the installation process, and at the end, when the screen says to log in CF administrator to complete the installation of the process, I click on the link, my browser turns his wheels for a while, then a white page or an error HTTP 500 Internal Server Error message Depending on the browser used. I'm really starting to pull my hair on this topic, because I can't seem to find anyone else who has had this problem, but I don't know why my system should be anything out of the ordinary. Here is what has been my approach:

  1. start IIS (it's 7.5) and configure it with the ISAPI extensions and IIS metabase and IIS 6 Configuration compatibility under tension; Verify that IIS is working correctly by putting the IIS page using "127.0.0.1".

  2. restart the computer

  3 turn off the Windows Firewall and turn off the antivirus software

  4. double-click on the installation file ColdFusion_9_WWE_win64.exe to begin the process of setting up CF 9, using directories by default, etc. indicated during installation

  I can't complete the installation process because I can't go to the CF admin; Otherwise, I then also install CF 9.0.1 update.

  I went through the installation process now several times (first uninstall CF 9 each time) and we also tried the CF installer using 'Run as Administrator', as well. Nothing makes no difference. If someone saw all what my problem could be, things I should check, etc., I would be so grateful. I've been a user of CF since CF5 and have never had such difficulties to the installation of the program.

  Thank you!

  I have the second that, I would also add a minimum size for the heap.

  Replace this jvm argument:

  -Xmx512m

  with this:

  Xms1024m-Xmx1024m

  Also, go download the JAVA virtual machine to update here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/JDK-6u25-download-346242.html

  Get the x 64 version of Windows and install it. Once its installed change the path of the default JVM to the FMV of new 1.6.0_25.

  To make this comment on the current path of the JVM in the config file and add a new, so you can change it back like this:

  # Built in 1.6.0_14 duration
  #java.home=C:/ColdFusion9/runtime/jre

  # Java Runtime 1.6.0_25
  Java.Home=C:/Java/JDK1.6.0_25/JRE

  Note the # to comment on the path to default java.home. Note also that, even if it is Windows use / slashes in the path to the Java virtual machine.

  Adjust the result of path to the directory /jre from around where you installed Java. I recommend the installation off c: in a java directory as if I had

  without space just to make this simple (IE avoid c:\Program Files\blah blah\blah...).

  Stop see Delete or backup the log files in the /logs directory so that you get the fresh files (easier to read than, but for the last message added) and repeat CF. If it does not start check newspapers, but most likely you got the path in the variable java.home evil. Keep playing with it until you get it right. If it does not start, try to load a cfm page and check the logs for errors and post them here.

• Installation of Windows 8 to 8.1 does not

  This was annoying for like 6 months. First of all, the update of windows appeared on my screen and I am able to download. He did the thing 'you have 15 minutes to save your stuff' and then I press the button restart and all I see is the hp (my laptop is hp) logo sitting there and this thing of spinning at the bottom just like when windows starts up. LARGE. But then it just stay there. On the forums and the installation guide that it is said that it can take an hour, but IT WAS TURN for up to 24 HOURS once I tried. I just give up at the end and press the power button. Whenever I tried it just runs.

  I did all the things like

  -Clear the cache windows store

  -Disable the third-party antivirus

  -Unplug all devices

  -have a good connection internet (I used Ethernet btw)

  -J' even used the upgrade wizard

  AND I GET THE SAME RESULT EVERY TIME. I leave my phone for 1 or 2 hours sometimes see if it will work magically one day but is not. I need to get windows 8.1 because windows 8 sucks and I want to get windows 10 in the future.

  PLEASE SOMEONE HELP!

  Hello

  Thanks for the update on the issue. I appreciate your efforts to solve this problem.

  Startup files are corrupt that might cause this problem.

  Installation media is required for troubleshooting this problem. If you do not have the installation media, you can create installation media. To do this, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Try the following methods to diagnose and resolve the problem.

  Method 1: Run the auto repair

  Go to the advanced options and run auto repair. It will repair the basic components of Windows and fixed the software.

  Boot recovery environment with the installation of Windows Media 8 It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the Windows 8 installation DVD into the DVD-ROM (or the connected USB port), and then restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the type of keyboard and good time .
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair screen Options Advanced .
  (g) then choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  If the problem persists, try Method 2.

  Method 2: If the auto repair fails, then I suggest you follow these steps.

  a. boot from the recovery media.

  b. click on repair your computer.

  c. click Troubleshooting , and then select Advanced Options.

  d. click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  e. restart the computer.

  Hope this information was useful. Do not answer with the results of these methods for additional help on this issue.

• Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

  I try to install Indian Jones and the Doomsday Machine on my computer.
  I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
  I am running Windows 7 64 bit.
  Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
  Any help would be appreciated.

  The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

  I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• Satellite L750 - cannot complete the installation of Windows

  Just bought new computer initial sart upward and installing Windows.

  Get the loop of the error. "The computer started unexpextedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart, then restart the installation. Whenever I click ok to install Windows error reappears.
  Cannot install Windows.

  Maybe the computer back and get a new one?

  Hey,.

  You can already access the Windows Advanced Boot menu and start the recovery of disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Otherwise I agree with and you must return the phone and ask for a replacement. These things shouldn't t generally occur on output from the computer to the box. I m sure that the store will replace it for free. ;)

• Pavilion Office H8 - 1130: after upgrade to WIndows 10, function key (F2) does not work, delete the folder

  After the upgrade to WIndows 10 the other day, I copied some 30 GB of videos and photos from my phone to a USB connected HDD.

  using Windows Explorer:

  -J' created a new folder

  -Use of function F2 key, I renamed the folder "New folder" to the 2015-16'

  -all good then I copied (low-pressure) the files in this folder

  Once done, I decided to rename the folder in different name

  -J' pressed the function F2 key to rename it, but press ESC' to abandon it

  -the file has been renamed to "new folder".

  -J' then pressed F2 to rename it and the file disappeared!

  -J' checked the trash, not there

  There you go. How can I retrieve these prics

  It is, but I cut/move the files in the DCIM folder on my USB key.

  I found the culprit.  The 'function' key lock keyboard sound, he was in no hurry.  This Microsoft keyboard allowed this option to disabled and completely forgot it.

  I've tried and tested again and this is the reason.

  Thanks for your post

• I bought a used iPhone 4S and erased and the previous owner had his account iCloud out of it, but I can't yet to complete the set up because he says sim card is not supported?

  I bought a used iPhone 4s to a friend of mine, and they took their offshore and all iCloud account as they were supposed too. It still won't let me complete the set up it says that my card SIM of Fido is not supported, but the last time I saw the information of the carrier when the person that I bought the phone he said 15.5 Fido I think. Do I need to phone apple or what I call fido and to somehow cope? I myself remember having to change devices when using a fido handset represent the last I checked, and I'd love to have this figured out without having to pay more money. Help lol

  The error you see on the SIM not supported is indicative of the device being locked to another carrier SIM card that you provide to. I suggest you check that with your friend and see if this device has been locked to another carrier. Could be called Apple, but all they could do was tell you what carrier of the device is locked to Apple do not unlock phones. Once find you the carrier, you need to contact and see if provide unlocking services, and if they do, see if you qualify to unlock. Once again, your best first call is to the friend you bought it from.

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• Error code: 641 installation of Windows and Microsoft Silverlight updates does not

  Original title: problem downloading Windows updates

  Windows Update keeps a failure.  Says he has met the code 641. Also Microsoft Silverlight does not. Impossible to uninstall or reinstall.
  At some point, I think that it says cannot find windows install

  Larry

  Hi Larry,

  You can try the following steps and check if it helps.

  Method 1:

  You can view the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Method 2:

  You can also read the following article to reset the Windows Update components and check.

  How to reset the Windows Update components?

  About Silverlight, you can try the steps in the following article.

  What is the complete error message you get?

  You can read the following article and try the troubleshooting steps to solve the problem of Windows Installer.

  Problems installing and uninstalling programs on Windows computers

  Hope this information is useful.

• completed the download of Adobe Flash Player 11, but does not work

  I have downloadred flashplayer 11 to the point where it says that it is comprehensive, but it does not work because it wants me to download it again when I want to use it.  While downloading, he asks me to sutdown internet explore what I do and he tells them that it is complete.  What do I do?

  Assuming you're using Internet Explorer 9, try the procedure described in this FAQ:

  Allowing Flash Player in Internet Explorer 9

• at idle, the screen go black and says cospla 1scr does not work

  When the computer is idle for long periods of time, the screen turns black with notice cospla-1SCR microsoft looking for correction does not. This happened for several months now.

  What program is it and can I remove it does not, and microsoft has no answers to fix it.

  I think the message is Lightn ~ 1.SCR. That would be a problem with the screen saver you have.

  Go to control panel of configuration, appearance and personalization or customization in Classic view, and then click Change screen saver and choose something else.