Cannot add the business to the server of Xcode Developer account

Similar Questions

• Team Poroductivity centre - cannot add the Server/repository of documents

  Hello
  
  I am using PTC and I wanted to add a document server, however, when I login as administrator of PTC, on the Directory tab, I select the document and click the sign «+»,
  
  the drop-down list is empty, I know that it means that I don't have those prescribed, but I don't know exactly which connector is that?
  
  I did a "update check", but I don't see either document connector.
  
  Search online and forum and know that I needed a document to the team server.
  
  Can someone guide me on which is the connector of law that I tested a bit, but nothing else works.
  
  Appreciate the help =)
  
  Thank you.

  Hello

  Unfortunately the document connector does not in this first release of Team Productivity Center. It is one of the features that we are working on a later version. I would be interested to know what/how you want to use the PTC Team Documents. Maybe you could send me to susan duncan dotty at oracle dotty come

  Rgds

  Susan

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• "Safari cannot find the server.

  I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!

  Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.

  Thank you.

  Hello

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then restart Safari to test.

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• Continually, I get the error that cannot reach the server while trying to install SP1.

  Win XP Pro reloading, get all updates

  I reinstalled Windows XP Pro and need to update to SP1 to 3 as well as all security updates.  (After download) installation, SP1, I continually get the error that cannot reach the server, visit Web of MS for a version that requires no web access if the problem persists. I can't find this version of SP1 that does not need to happen on the server from Ms.  In addition, isn't there an easier way to get all updates when you perform a new installation instead of going one by one with all the updates?

  If you have SP1A, then you can go straight to the installation of SP3.  If you have SP1, then you need to install SP1A or SP2 before going to SP3.  You can get the updates described in the following article:

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389/ >

  HTH,
  JW

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Windows 7 Advisor - cannot reach the server

  I installed the Windows 7 advisor and both yesterday and today, he cannot reach the server updates - or before scanning - so it does not work for me.  Any ideas? The server is down? I can access many other things!

  It seems to run normally today.

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Add the server behavior

  Hi... I try to add the server behaviors panel in Dreamweaver cc, but I can't find the folder features disabled... I find the folder "server behavior"...

  I use windows 8.1... Please someone help me... Thank you!

  You can download the ZXP obsolete DMX Zone Server behaviors extension, but if you are working with PHP/MySQL, I do not recommend to use them for current or future projects.

  http://www.DMXzone.com/go/21842/enable-server-behaviors-and-data-bindings-panel-support-fo r-dreamweaver-cc.

  The obsolete server behaviors have been removed for some reason.  The links do not work on servers with PHP 5.5 or later version.  The code they produce is exceeded.

  A more long-term solution is to manually code in (improved) MySQLi or PDO.

  If it is not within your skill set yet, here are 2 commercial extensions that replace panels behaviors deprecated in DW.

  http://www.WebAssist.com/Dreamweaver-extensions/mysqli

  http://www.DMXzone.com/go/22096/updated-replacing-Dreamweaver-server-behaviors-with-dmxzon e-extensions /.

  
  

  Nancy O.

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• Add the server as a target OEM grid control to monitor

  Hi Experts,
  
  I installed the grid control OEM 11.1.0.1.0 on server 'A', which has a database version Oracle 11.2.0.1.
  The operating system on the server 'A' is 5.5 OEL. The grid control installed on this server works fine and I have deployed agents on remote hosts that I am able to monitor successfully using this grid control.
  
  Now, I want to add the server ('A') on which the grid control is installed to be monitored by the grid control. Could someone let me know how to do this? I felt that it's the same way deploy us agents to remote hosts, but here, the agent is already installed at time of installation of control Grid.

  http://arpitagrawaloracle.blogspot.com/2012/05/manually-add-host-target-to-grid.html

• After that stright connected to iSCSI (initiator) Host cannot ping the server iSCSI (target), but the target can, why?

  After that host on vSHere 4.0 strightly connected to iSCSI (initiator) host cannot ping the server iSCSI (target), but target can.  And iSCSI works well. I mean I can create and use the iSCSI disk, why? It makes me confused.

  Thank you!

  Geoarge,

  iSCSI traffic uses a VMkernel port, instead of using the command 'ping', use 'vmkping '.

  André