Cannot allocate New Log Error and transactions
Oracle 9.2.0.4The user runs a report that executes PL/SQL. A SELECT dynamiic statement is generated and executed. This particular request is long term and ends when an error message "Unable to allocate new logs" appears in the database alert log file. The report shows no selected data. No Oracle error have been raised/caught in the trap during the course of the PL/SQL report. Immediately, the user runs the same exact report again and gets the selected data.
My questions:
Can the occurrence of an "Unable to allocate new logs" entry to the database alert file cause queries to long term to retrieve any data?
Can there be a setting in the database triggers an error ORA - so that the report could identify when this happens?
I know that the DBA should treat the cause. I just want to know what the report of PL/SQL can do to intercept it when it arrives.
Thank you
Can the occurrence of an "Unable to allocate new logs" entry to the database alert file cause queries to long term to retrieve any data?
Unless there is a software bug, 'impossible to allocate new log' can freeze the instance of database for a while, but that's all.
Can there be a setting in the database triggers an error ORA - so that the report could identify when this happens?
As far as I know, no.
9.2.0.4 is an Oracle either fully supported version. You must spend at least 10g.
Tags: Database
Similar Questions
-
No complete checkpoint - cannot allocate new log
Alerts log is filled with these messages. What is the best way to solve this problem?
Thu Apr 02 12:54:54 2015 Thread 1 cannot allocate new log, sequence 138273 Checkpoint not complete Current log# 2 seq# 138272 mem# 0: /du01/ORACLE/ORADATA/IMR1/redo02.log Thread 1 advanced to log sequence 138273 (LGWR switch) Current log# 3 seq# 138273 mem# 0: /du01/ORACLE/ORADATA/IMR1/redo03.log Thu Apr 02 12:55:21 2015 Thread 1 cannot allocate new log, sequence 138274 Checkpoint not complete Current log# 3 seq# 138273 mem# 0: /du01/ORACLE/ORADATA/IMR1/redo03.log Thread 1 advanced to log sequence 138274 (LGWR switch) Current log# 1 seq# 138274 mem# 0: /du01/ORACLE/ORADATA/IMR1/redo01.log Thu Apr 02 12:55:45 2015 Thread 1 cannot allocate new log, sequence 138275 Checkpoint not complete ... ... ... oracle@ORA3> select group#,thread#,sequence#,bytes/1024/1024 size_mb, members,status from v$log; GROUP# THREAD# SEQUENCE# SIZE_MB MEMBERS STATUS ---------- ---------- ---------- ---------- ---------- ---------------- 1 1 138301 25 1 ACTIVE 2 1 138302 25 1 CURRENT 3 1 138300 25 1 INACTIVE
INCREASE the size of the REDO of a factor of 10 files!
-
Thread 1 cannot allocate new logs?
Oracle 11.2.0.4 / Windows 2008 Server
I started to notice the mistakes below in the alerts log
Private stream flush is not complete
Thread 1 cannot allot of new newspapers, sequence 431128-may-2015 11:54:34 CEST UNKNOWN 16
Archived journal 4169 extra for each sequence 1 4309 0xd4e67ae9 dest ID thread entry 1:
I checked the newspaper switching frequency which seems fine...
27-MAY-2015 6 2 1 2 3 2 2 2 4 4 4 4 3 5 4 4 4 3 2 2 2 2 6 1
28-MAY-2015 12 1 2 1 3 2 2 4 3 3 4 3 0 0 0 0 0 0 0 0 0 0 0 0
I have two redo log groups made up of military record three size 51200 KB
Don't you think that it would solve this problem to increase the size of the redo log files? thoughts would be greatly appreciated!
Please follow the following Doc ID 435887.1, 781999.1 docs that will solve your problem. It's hard to tell you the size of your redologfile with spikes knowing anythink on your system. These DOCUMENTS will help you.
-
Thread 1 cannot allocate new logs, 714 - Checkpoint sequence is not complete
I work in a database of Oracle 10 g running on RHEL. The alert_*.log file is to turn off this type of text for the past months:
Thread 1 Advanced to record the sequence 713 (LGWR Switch)
Current log #2 seq # 713 mem # 0: /dbfiles/.../onlinelog/filename.log
Current journal #2...
Thread 1 cannot allot of new newspapers, sequence 714
Checkpoint is not complete
Ideas to get pointed in the right direction is appreciated.
Thank you in advance,
WesThis message indicates that Oracle wants to re-use a redo log file, but the current position of the control point is always in this newspaper. In this case, Oracle must wait until the position of the control point passes this newspaper. Because the objective of additional control point never accused tail current log more than 90% of the smallest size of log file, this situation might be met if DBWR writing too slowly, or if a log switch occurs before the log is completely filled,
or if the size of the log files is too small. When the database is waiting on the checkpoints, redo generation is stopped until the journal is made.Add the additional newspaper group
Increase the size of the recovery logsCheck 147468.1
Published by: VishalORCL on December 19, 2011 16:59
-
what setting to change to avoid the "unable to allocate new log"
Hello everyone.
I'm on 9i r2 on windows server 2003 edition of the SD with attached ISCSI. I have the drive 1 recovery as well as DBF newspaper group in the data directory. 2 other groups redo are on the 2 local disks separated and archiving logs (in another folder).
I'm getting some errors "cannot allocate new logs" every two days and in Event Viewer "process Archive error: Instance ORACLE prdps - cannot allocate Journal, check-in required.
I do not know what setting I should change.
Current configuration:
db_writer_processes 1
dbwr_io_slaves 0
Here is the output from v$ sysstat:
49 8 7410575 written DBWR checkpoint buffers
50 8 7748 written DBWR transaction table
51 DBWR undo block writes 8 4600265
52 DBWR revisited being written 8 5313 buffer
DBWR 53 free ask 8 26383
54 DBWR free buffers are 8 19838373
55 DBWR lru scans 21831-8
56 DBWR summed scan depth 8 21265425
57 8 21265425 scanned DBWR buffers
58 control DBWR 8 1719 points
59 DBWR cross instance writes 40 0
60 fusion DBWR written 40 0
It's alert.log:
Fri Mar 06 00:25:52 2009
Arc0: Complete 1 thread 1 log archiving sequence 7004
Fri Mar 06 00:25:54 2009
Thread 1 Advanced for you connect to sequence 7006
Currently Journal # 3 seq # 7006 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO03A. JOURNAL
Currently Journal # 3 seq # 7006 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO03B. JOURNAL
Currently Journal # 3 seq # 7006 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO03C. JOURNAL
Fri Mar 06 00:25:54 2009
Arc1: Evaluating archive log 2 thread 1 sequence 7005
Arc1: Begins to archive log 2 thread 1 sequence 7005
Creating archives LOG_ARCHIVE_DEST_1 destination: "F:\ORACLE\ORADATA\PRDPS\ARCHIVE\PRDPS_001_07005.ARC."
Fri Mar 06 00:26:03 2009
Thread 1 Advanced for you connect to sequence 7007
Currently journal # 1, seq # 7007 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO01A. JOURNAL
Currently journal # 1, seq # 7007 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO01B. JOURNAL
Currently journal # 1, seq # 7007 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO01C. JOURNAL
Fri Mar 06 00:26:03 2009
Arc0: Assessment of the archive log 2 thread 1 sequence 7005
Arc0: Impossible to archive log 2 thread 1 sequence 7005
Newspapers archived by another process
Arc0: Assessment of the 3 thread 1 sequence 7006 log archives
Arc0: Starts to archive log 3 thread 1 sequence 7006
Creating archives LOG_ARCHIVE_DEST_1 destination: "F:\ORACLE\ORADATA\PRDPS\ARCHIVE\PRDPS_001_07006.ARC."
Fri Mar 06 00:26:15 2009
Arc1: Finished 2 thread 1 log archiving sequence 7005
Arc1: Evaluating archive log 3 thread 1 sequence 7006
Arc1: Impossible to archive log 3 thread 1 sequence 7006
Newspapers archived by another process
Fri Mar 06 00:26:16 2009
Thread 1 cannot allot of new newspapers, sequence 7008
All newspapers need to check-in online
Currently journal # 1, seq # 7007 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO01A. JOURNAL
Currently journal # 1, seq # 7007 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO01B. JOURNAL
Currently journal # 1, seq # 7007 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO01C. JOURNAL
Thread 1 Advanced for you connect to sequence 7008
Currently Journal # 2 seq # 7008 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO02A. JOURNAL
Currently Journal # 2 seq # 7008 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO02B. JOURNAL
Currently Journal # 2 seq # 7008 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO02C. JOURNAL
Fri Mar 06 00:26:16 2009
Arc1: Evaluating archive log 3 thread 1 sequence 7006
Arc1: Impossible to archive log 3 thread 1 sequence 7006
Newspapers archived by another process
Arc1: Evaluating archive log 1 thread 1 sequence 7007
Arc1: Beginning to archive journal 1-wire 1 sequence 7007
Should I just change
db_writer_processes 1
dbwr_io_slaves 2
Thank you
Any help appreciated.This message indicates that Oracle wants to re-use a redo log file, but
the
associated with corresponding control point is not over. In this case,.
Oracle
Wait for the control point is carried out entirely. This situation
may be encountered especially when transactional activity is
important.search for:
-Background checkpoint started.
-Control your mat point.These two statistics should not differ more than once. If it is
not true, your base weighs on the control points. LGWR does not reach
continue
next write operations that ends the control points.Three reasons may explain this difference:
-A frequency of control points which is too high.
-A control points are starting but not filling not
-One DBWR writing too slowly.How to resolve incomplete control points is through tuning
control points and
newspapers:(1) gives the checkpoint process more time to scroll through newspapers
-Add more redo log groups
-increase the size of the logs again
(2) to reduce the frequency of control points
-increase the LOG_CHECKPOINT_INTERVAL
-increase the size of newspapers in restoration online
(3) improve the effectiveness of the control points for the CKPT process
CHECKPOINT_PROCESS = TRUE
(4) set LOG_CHECKPOINT_TIMEOUT = 0. This disables the verification script
based on
time interval.
(5) another way to solve this error is for DBWR to write quickly
the dirty
buffers to disk. The parameter associated with this task is:DB_BLOCK_CHECKPOINT_BATCH.
DB_BLOCK_CHECKPOINT_BATCH specifies the number of blocks that are
dedicated
inside the batch size for writing the control points. When you want to
speed up
control points, it is necessary to increase this value. -
Eventvwr logs errors and warnings plus 6 200!
Eventvwr records errors and warnings over 6200
My configuration:
* Dell i7 with 8G of memory.
* Windows 7 sp1 teacher
* SQL Server 2008 with BIDS2008
* Oracle11gR2 with SQLPLus and SQLdeveloper
* Java 7 update 40 Std Edition
* McAffee
* MalwarebytesEventvwr shows more 6 200 errors and warnings.
Errors are followed by events-core, MCUpdate, PrintService, DHCP, DistributedCOM, SQLISService100, MSSQLServer client... and many others
But the laptop boot and run all the software installed without complaining...QUESTION 1: How I clear the eventvwr log events and start over so I can monitor errors when they occur?
QUESTION 2: at startup, McAffee wonder if I want to allow change the disk, this usually happens after a few updates downloaded applications for example Windows updates, updates of Adobe etc...
I paid more than $200 for some company that clean, now he's back :(
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Good people you've heard of this one before:
I can connect to my basic admin account, but not others. I tried to create new user accounts after you delete the old user accounts but system would not apparently carry out process. I get the following warning:
Service user profile Service failed to connect
User profile cannot be loaded.I tried all of the recommended patches (see list below)
1 ran all appropriate steps as stated in the article: http://support.microsoft.com/kb/947215 - no joy
There is not other profiles listed in the register except the administrator account on the basis and since I couldn't connect successfully to a user apparently newly created accounts, the profile has not completed the process of generation.2. I have not ran the SFC system - no joy. He replied with the following: Windows Resource Protection did not find any breach of integrity.
Then... of other big ideas?
Oh
Running Win 7 with all latest updates (login problem is not a new problem according to my children - I just got back from the extended learning this persistent problem)
I am on an Intel machine running dual quad core which is only 6 months old.
I run MS Office 2010Hello
I suggest you to consult the steps mentioned in the link and check if it helps.
Hope this information is useful.
-
BlackBerry smartphones cannot create new email address and the password are correct
Just transferred one of my domains hosting that I use for my other domain. Went to create an e-mail account for the 3 email addresses I had the BB under prior host. Removed the old accounts. Click Setup mail accounts, then other then entered the correct address and the correct password. Received message 'invalid address or password '. Not possible I installed these accounts on my PC and my IPad with no problems. It seems that BB won't accept any new domain name account that I transferred 10 days ago, can someone help me please? Thank you!
TCC - I THANK YOU first to respond to my situation and the second to be ON - it appears that you are an expert on the RIM! That was the problem - integration. Apparently my Blackberry account 'forgotten' about my domain name and had to be reinstated. I discovered by obtaining technical support for my carrier, AT & T and when they could not understand why the e-mail accounts could not be created, they transferred me to RIM. The first level of technology was also confused, but Nick and then of the immediately higher level of tech told me exactly what you have written here - same problem, same solution. CptS, thank you!
-
Cannot allocate a new newspapers, sequence
Hi, I see my alert.log who writes "1 thread cannot allocate new log, the sequence".
What is thread 1 cannot allocate new journal, sequence?Hello
Please visit the following link.http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:69012348056
Concerning
Bilahari -
Checking the logs, error, transactional logs logs
Hello-
I was wondering if Eloqua has Audit logs, logs errors or transactional to show newspapers if information is captured by Eloqua, or if an error occurs somewhere behind the scenes.
Going through the manual, I am only to find references in the log files as part of the add-on of HIPAA.
Are there logs without the Add on HIPAA and they easily accessible?
Thank you
Doug
Hi Doug -.
There are a few different types of newspapers, that you can find in Eloqua:
To access each, you will need the correct credentials (usually the customer administrator) and will find them inside the Configuration tab:
1. connection of the user history.
This is located under the users
And the tab inside users dashboards
The dashboard looks like this, you can access the raw data in the button of "additional reports:
This is a very old style scoreboard E9 and cannot be found inside the preview.
2. errors and history of CRM integration
It is located in the database of the administrative menu section, and more particularly in the integration:
Your integration to different RCMS that SFDC and can display different names as the picture below, but the statement is located at a few places here:
If you point to each of the following areas (waiting for update, update complete, updated failed, with success of the imported records) you will get the menus that look like the image below and you can click on them to view a specific report on integration:
There is also a button seen above you can click to review additional reports:
Similar to the dashboard above, these are not available in Insight.
3. download history
Within the area of integration (as shown above) you can access the data on downloads and file transfers, click "Incoming" - it will open something that looks like the image below and in the reports tab, you can find additional reports on data in the system.
4 marketing Operations Center
The other place, you can find more information is the center of Marketing operations, it can be found after the path in the image below:
It is more operational data, but may be some of you looking for example how it looks:
Hope this helps,
Lauren
-
I have a new macbook pro and want to install CS3 on it. I followed all the download links. Found my serial number for my Adobe account and get up to date through the whole & get this message ' put in place has encountered an error and cannot continue, contact adobe customer support for assistance ' all I want is for CS3 to install on my new computer so I can continue to work and do not have to spend hours working it help Please. CC is not an option, because I work in a country with no reliable unlimited internet access
New computer means new problems of system operating with the OLD software means
Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705
10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed
-solution https://forums.adobe.com/thread/1689788 of a person
-
The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.
A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program
. The following file can help you identify the program that made the change. GT Gina.dll
* original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside. I get a message that the function of the Welcome screen has been blocked *.
Hello
You can try the steps outlined in the article below and check out them.
The logon screen "Welcome to Windows" does not appear when you start the computer
http://support.Microsoft.com/kb/817142 -
I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:
var myCommand = new Command ("ls");
myCommand.execute (true);
System.log (myCommand.Result);We use VAPP VCO and we continue this error:
"Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"
Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.
Have you tried to increase the memory of the virtual machine?
I assume that you already have tried to restart the virtual machine without increasing the memory, just?
Christophe.
-
My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?
Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...
Tell us step by step, in detail what your actions.
Tell us a story
-with a beginning, middle and end. We need to figure out what you know and that you have lived.
If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?
Quoted by of Apple 'how to write a good question.
To help other members in answering your question, give as much detail as possible.
- Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
- Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
- Describe the problem and include all the Details on what seems to make it.
- The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.
For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question
"Keep it short and Simple"-take your time... but be thorough - CCC
-
db_load error: cannot allocate memory
Hello
When I try to import a dump file, I always get this error:
db_load: BDB2055 lock table is out of available lock entries
db_load: cannot allocate memory
I performed "db_load f outdb/outdb2 - h env xass.db".
and I put max locks:
dbenv-> set_lk_max_locks (dbenv, 1000);
but it does not work.
What should I do to avoid this problem?
Thank you for your help in advance
Mark
Update:
I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.
The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?
because I can not increase the infinite number of locks!
If this is not the case, How can I cause "db_load" release of transaction locks?
Is someone can help me?
Mark
Hi Mark,
If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.
The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.
Kind regards
Winter, Oracle Berkeley DB.
Maybe you are looking for
-
If I'm on a Web site and open a few different pages and then decide to return to a previous page, or close the page in question, I get a message that says you close tabs 3 or 4 tabs etc. If I want to just close the 'courses' tab I'm on, I was able to
-
Download file programmatically registered Rio
Hi all I was wondering if there is anyway to download by programming a file recorded in RIO to the local host. I'm post-processing large amounts of binary data and it seems that RIO can cope with her (lack of memory, accidents etc)... Thanks for your
-
Update for Windows XP (KB2686509) security is not installed
Kb268509 update will not be installed. I get no error message #, I tried the selective startup in msconfig and disable all Microsoft services on the services tab, and I get a BIG red X saying could not check c:\windows\kb268509.log, I searched my com
-
DVD drive burning - I want to burn music from the Internet on a DVD disc
I want to burn music on the internet with a DVD disc. I don't know how to do it at all. Please tell me what to do step by step. Thank you!
-
How to remove the virus Vista Home Security 2011?
Vista Home Security 2011 has blocked internet activity from my computer. It is unregistered and I can't understand how deleted.I did a full scan with McAfee and it blocked three viruses. I see the path of the program, but cannot locate. C:User/Joe/A