Cannot authenticate after you move the HDD after falling motherboard

Similar Questions

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• How to keep the video selected after you move the playback cursor

  I use Flash CS5.5

  After selecting a Clip, the properties panel displays its properties. When you move the cursor reading by dragging the mouse, the properties of this Clip are still visible in the properties panel. But as soon as I stop dragging and release the button of the mouse, the properties panel changes - it now shows the properties of the motion tween.

  Is there a method to keep the selected Clip after dragging the playhead and do not pass the selection to the motion tween? That's because after dragging the playback slider I still need the Clip properties, so I need to select again and again after dragging the playhead.

  You forget entirely on the query editor.

  Query Editor window->.

  When you slide on your scenario, this shows you all the key properties and their values as well as real keyframes. This is where you should be inspect and adjust the values.

  

  It took me a while to return to flash animation and when I started the conversion from the classic Tween system to the new system of motion tween I didn't know that this sign existed. He brings Flash a little closer to After Effects (my favorite animation tool). It's a lot better that the classic tweens, it's safe.

• Firefox 17.0.7. Display the menu, when you are using extended view (Win7), flickers off when you move the slider to a selection. Reg FF version works fine.

  Using Windows 7, view extended., Firefox 17.0.7

  Firefox menus (file, editing, etc.) and user bookmark lists flicker in and out of visibility when you move the slider to a selection. This happens on the primary display only the second screen. It does not occur on regular product version (23, etc.) and does not occur on any other application.

  We are required to use version 17 on internal business machines.

  Bob Hello, that might be a problem with hardware acceleration - try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Yellow box pop up when you move the missing links in CC?

  The behavior when you move the links in the links in CS6 Panel was a yellow jump to the top of the box with the full path of the link.

  I find that does not match the behavior in CC and really miss me that.

  Am I missing a setting somewhere to allow this in CC?

  Do you have tips enabled in your preferences?

• Error after you move the request for new development machine (minimum environmental change)

  I'm really new FAD and work on my first application.  So far it's going pretty well, and I'll have a blast.

  I met a problem move on my application to a new machine however.  I initially developed on the virtual machine running on my laptop, but decided to switch to a more powerful machine.

  I have a problem trying to 'Run' of pages in my application.  Integratedweblogic is throwing an error everytime I try to load a page (and only the web pages window session that opens just shows 'o' turning indefinitely):

  "DFW-99998 [javax.naming.NameNotFoundException] [oracle.jbo.server.DBTransactionImpl.lookupDataSource] [j2ee app]".

  Original environment:

  Windows 7

  Oracle JDeveloper 11g

  Oracle DB for windows running on the same OS/env/localhost

  New environment:

  Windows 7

  Oracle JDeveloper 11 g (same version)

  Oracle DB running in a vm virtualbox using Oracle Linux (it is a much larger, more 'production-like', a database in which my application would be hypothetically).

  I made the necessary changes to the connection of database (host/port/user/pw/etc) used by the app and I still get the above error.  I even tried to copy across my jdeveloper and integrated settings of the server weblogic (C:\users\me\AppData\Roaming\JDeveloper\system11.1.1.7.40.64.93) to the new environment in addition to the copy in the root directory of the application, change the db connection settings, and I still get the same error.  I also have the same error occur when, after having made the connection Exchange Pb, delete the weblogic (C:\users\me\AppData\Roaming\JDeveloper\system11.1.1.7.40.64.93\DefaultDomain) server folder and start again, with jdeveloper build a new instance IWLS run.

  I must point out that, when I run the app service module in the new environment with the db connection changes, I can test all Instances of the view object, and they work as before and as expected in the Oracle Business Component Browser window.  So that seems to indicate that it's just a problem with my setup of weblogic/instance, but I'm not sure.

  As always, I appreciate very much all your comments and thanks in advance for answers!

  If you like the framework automatically adds the data source, it must be checked. If you want better control and better together for manufacturing sheet you it is unchecked. In this case you must create the data source on the web logical server yourself.

  Try again with the box checked initially.

  Timo

• Power supply becomes unstable when you move the Satellite 1900 203

  I have a problem with my toshiba satellite 1900 203 (1905 for usa version). I can manage to start perfectly and I can work without any problem, but if I move the laptop just there seems to be a loss of power (fan is working and screen still shows black and white lines vertical and it sometimes becomes very bright). The CPU seems to also stop, because if I'm music listen to it disappears too.

  I'm pretty sure that this is not a screen problem and it must be powered; I throw overheating, as I can work perfectly for a long time if I move the laptop, but after knocking the laptop intentionally, it crashes. I think there must be a bad contact in the motherboard, but I don't know how to find...

  Thank you

  Hello Miguel

  Here on the forum, it is not easy to give you a diagnosis. To do this, and to understand the problem the laptop must be in front of me.

  In any case, from your description, I assume that there may be more power. If there is the problem with portable power or no power supply energy, but in your description there are usually few of very strange things (fan still works but shows vertical lines).

  Sorry, but I think that your device should be properly checked by technicians. They have various tools to make diagnostic tests and find out what may be the problem.

• Bug: Façade objects relative position changes when you move the fusion VI on block diagram

  I posted a bug report on the LAVA, here:

  http://forums.lavag.org/front-panel-objects-relative-position-change-when-placing-merge-VI-onto-bloc...

  If someone at home OR can reproduce, can I please get a CAR #?

  Thank you

  -Jim

  Hi Jim,.

  This was reported to R & D (# 139212) for further investigations.  I don't know if it's more embarrassing fall into the range of functions and reorganize the façade or drop out of the front and hope that the code of the Subvi is not disseminated in the block diagram.  Because the code (or orders) are selected after a fall, and you can switch between diagram and panel above all keeping this selection, at least you can move the code as a whole, right?

• Turn off the bookmarks bar bulging feature automatically on the left side of the screen when you move the pointer to the left

  It's bothers me a lot, because I'm used to move the pointer to the left of the screen when I don't want to see it. Now, it increases the Favorites bar, which was not my intention. I checked all the options, but I couldn't turn it off. Maybe you can change to the code level?

  Thanks in advance!

  Sadowskim,

  Cancel Safari, bookmarks/favorites bar appears on the left side, if the cursor of the mouse is on the left. This link addresses the problem you describe.

  I suggest that you provide Safari comments describing your need for a user option.

  

• Program accelerates when you move the mouse

  I use a simple few stripcharts program and have put a clock on the screen to measure the milliseconds per program cycle.  I noticed that when I move the mouse, it takes about 33mS to perform the loop, but when I move the mouse, it goes down to 8mS.  The stripcharts to accelerate as well.  I really need the program to run at the fastest speed to get a decent amount of data to display (Nyquist rate issues).  Has anyone seen this kind of problem before?

  In addition, there is a better way to send data to 5 stripcharts using PlotStripChartPoint 5 times?

  I'm under V8.0 on a PC104, 1.4 GHz Pentium M, Windows XP.

  Thanks for all your help over the 6 months.

  Thank you very much for your help.

  I tried the multithreading and the solution of PlotStripChart and the two a little help, I still had my main problem, lack of pics.  I was not so concerned with the display of all data in time real, just need something for the user to see what was going on.  The final solution, that I came was to use PlotStripChart and SetSleepPolicy the VAL_SLEEP_NONE value.  This has increased my program for even faster speed that when I moved the mouse.

  I realize that Windows is not a RTOS, but this request didn't really need that go well.  Most of the data I am looking for is about 1 to 20 Hz, and this easily enough.

  Once again, thank you.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• monitors flash when you move the cursor

  I have three monitors for use in FSX.  Normally, all my programs, for example, Gmail, visits, casino games, etc. to display on the monitor Center.  I use Chrome browser with Windows 7 Home Premium 64 b.  For some reason, when I scroll upwards or downwards, or sometimes just move the arrow cursor, my left and right monitors flash with a background of 'ghosts' appearing intermittently.  Ghost poster background on strength wallpaper.  I used CCleaner, Glary Utilities, MalwareBytes.  I also used the disc of Windows 7, cleaning, optimization and defragmentation of the features.  The flashing is always present.  Does anyone have any ideas how I can fix this problem?

  
  
  Thank you
  CBX_bountystyle

  Hello

  1. it happens only during navigation?

  2. it happens when you use the Internet Explorer browser to navigate?

  3 did you changes to the computer before the show?

  The graphics card uninstall and reinstall drivers and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) Expand, graphics card, right click on the adapter

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-IE/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error of classic Tween when you move the point of rotation

  Hello

  I created a character who is running with classic tweens.

  When I move the distant point from the center of rotation of a shape (in my case, the forms are legs and I would like to move the point of rotation to the basin so that the legs remain attached to the feet and body), animation between two keyframes will show the form or the other shutter upwards or downwards, not according to the planned trajectory. I hope this makes sense.

  Thank you in advance.

  This happens when the alignment point is different at the beginning and end of a Tween. You must keep the same.

• Move the HDD from 510 a Pavilion to Pavilion 1600n

  I have a Pavilion 510a and a 1600n. Is it possible to move the HARD drive from the 510 the 1600n? I have a license of group o/s (XP) installed on both of these computers. Just trying to save a little money. Thank you!

  1dumbguy wrote: I have a Pavilion 510a and a 1600n. Is it possible to move the HARD drive from the 510 the 1600n? I have a license of group o/s (XP) installed on both of these computers. Just trying to save a little money. Thank you!

  Hello 1dumbguy, first of all, let me mention the links you list are not valid. But to your question.

  Specifications of 510 showed he has a 40 GB IDE hard drive. The specifications can be found here .

  The 1600n specs show that it has some Sata ports, but also some IDE connectors as well.

  The 1600n printer specifications can be found here .

  You should be able to remove the hard disk of 40 GB IDE and ribbon cable and install it in the case of 1600n, if there is a place to mount the hard disk of 40 GB.

  You must install ribbon cable into the primary IDE connector port and also make sure that the spindle of the rider on the 40 GB hard drive is set to selection of cables (CS), if not already.

  Restart the system and enter the BIOS and see if the hard disk of 40 GB is recogonized and in the Group of hard drive.

  Then restart the system and when your desktop appears, go to the computer and see Windows recogonizes 40 GB hard drive. If so, the drive letter may be different from what you would expect.

  Just select the 40 GB hard drive and select sharing for this disc, and if your C: drive is already shared, you should now be able to access the hard drive files may be desired, then transfer the files back and forth on hard drives.