Cannot authorize Digital Editions - says could not connect to the activation server

Similar Questions

• vCenter could not connect to the VSM Server

  I have SanHQ and HIT running well on vSphere 4.1. After upgrading vSphere 5.5 and HIT to 4 VSM, my new vCenter could not connect to the VSM server at all.

  1 VSM ip address must be configured on the management or iSCSI network?

  2. I have 2 vCenters to AC and DC, respectively. In this case, I have to install 2 VSM, each to each site? Note that although my VM networks on both sites and management are all connected via VPN, iSCSI networks are isolated.

  3. is it possible to deploy the VSM 3.5 and 4 so that the two vmware VI Client and Web Client have access to VSM features?

  VSM does not work with Linked vCenters mode so that a VSM would be able to access the two vCenters.

  You will need to deploy both VSMs.

  You cannot run two MSM 3.5.x and 4.0.x at the same time.

• "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI

  You use Windows 7, removed AA XI, reinstalled after buying last week - same problem.  It does not open and I get this message "acrobat could not connect to the dde server.

  the clues how to get out of the forest? Its very frustrating.

  Help

  [Left the Premiere Pro forum... MOD]

  Hey,.

  You could try to remove all Acrobat processes in Task Manager and then restart Acrobat.

  In addition, please repair Acrobat in the Help menu.

  If you still get the same error, press (Windows + Run) and type "REGEDIT".

  Go to "HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application" and tell me if the given key is AcroViewA10 or AcroViewR10.

  Kind regards

  Ana Maria

• Could not connect to the administration server.

  Hello... IAM trying to connect to the server of the EAS and Essbase-Essbase administration console server... It's error "Could not connect to the administration server", although all services are running (I kept services such as manual and all the services manually started)...
  A few times I can connect to the console and a few times not... anyone know what could be the error... Thanks in advance...

  Hello

  You can see "Services of Administration Hyperion" as a service. It can show "start" State. But again, reboot by right-clicking on it and try to access environmental assessments.

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• could not connect to the smtp server

  Hi all

  I'm on a 21.5-inch iMac using OS 10.11.3 at the end of 2012. Yesterday (and today...) Mail would not send anything and gives me a status 'offline' for sending. I use Gmail IMAP with 2 accounts. The same problem happened to my wife on his computer with the shared e-mail account. My iPhone (4) will send the mail from the same account. If I log in to Gmail directly I can send emails. I deleted the account and re-written information. I quit Mail and restarted the computer. I looked at several solutions in the forums and have tried what appear to be common ones (that I could find), but nothing seems to work. After restart of the account Gmail sent me an email saying I had been blocked for using a "precarious" app, and I checked my Gmail settings so that I can use less secure (as the devil which means?) apps. The problem persists...

  Mail connection doctor says that it is connected to the internet and my 2 IMAP accounts work, but 2 SMTP accounts (I guess for the sending of?) say "not able to connect to this SMTP server.

  It all started yesterday without changing all the settings or preferences that I know.

  Any ideas?

  Michael

  Have you checked the SMTP settings for the latest recommendations googles? Changed something on their end recently?

  You run a 3rd party cleaning apps (clean my mac, mac guardian, etc.) or AN Anti Virus on your Mac? If so, remove them.

  have you installed anything between mail works and does not?

  If so, remove it.

• "Could not connect to the IMAP server.

  I have Apple iCloud and other e-mail addresses in the e-mail client application. From this afternoon, none of them work - see the message object.

  In addition, my iPhone and iPad Mail suffer the same problem, but intermittently. My Mac Mail is all the time.

  • I left him and restarted the app, but without success.
  • Without success with the connection doctor (which somehow ' Mail is used the *' to work sometimes ").
  • Unsuccessfully to find other threads that solve this problem, because it is not just a mail to iCloud one.

  Please notify.

  Apple Mail troubleshooting

  Send and receive e-mails of troubleshooting

  Troubleshoot sending e-mail messages

  Post not send or receive messages after updating to OS X

  SMTP servers go offline

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• iPhone says it cannot update OS because I'm not connected to the internet

  iPhone says it cannot update OS because I'm "not connected to the internet", but I'm still able to search, go to web pages etc.

  At first, I tried with just plugged phone into a charger, but then tried to connect to my iMac via iTunes. He picked up the phone, said I had to update the operating system, made me enter and access code... still the same message "not connected to the internet. HA!

  It is a known problem. Apple has just released the 9.3.1 to fix this and other problems. Check the software update on the phone or in iTunes.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• iTunes could not connect to the iTunes store

  OP: iphone 4'

  try to connect to the iphone 4 to itunes, but it happens that itunes could not connect to the itunes store. the network connection timed out. Make sure that your network settings are correct and your network connection is active. then try again. but I can connect via Solution Explorer, but cannot update the phone

  To connect the iPhone to iTunes problems, contact Apple for support with their software/hardware:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• Could not connect to the internet via a USB Modem

  Could not connect to the internet via a USB Modem from my Nokia 6275 CDMA phone.

  Windows vista detects my phone connected via Nokia PC Suite via USB cable, but I couldn't connect to the internet using my phone as a USB modem dial. However, I am connected to the internet through the same dial-up access when I use bluetooth to connect to my phone as a modem. Please give me an emergency solution. I'm using windows vista 32-bit edition. It's windows vista Home premium.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  And contact the technical support of Nokia: http://www.nokia.com.au/get-support-and-software/download-software#.

  See you soon.

  Mick Murphy - Microsoft partner