Cannot be accessed by Satellite P100-347 after the password of BIOS setting

Similar Questions

• Satellite P100-347: after update 4.10 BIOS fan always runs at maximum

  Hello!
  I have a P100-347 and had graphics problems of stuttering while playing games. Updated BIOS 4.0 to 4.10, it solves the problem of stuttering!

  Now, my fan always runs at maximum, it never ideals.
  It's always the same, even when I choose its configuration. I use the same drivers as before, just only update the bios.

  I tested with the latest divers chipset intel and Nvidia alsow driver and it's always the same.
  So my concludes is the BIOS, is Toshiba knows something about this problem and work on a newer bios?

  Sincere friendships Ishmael

  Everything indicates that the BIOS 4.10 is the problem common to the always high speed of the graphic fan even when the PC is in sleep mode.

  I want to see action as a new revision of the BIOS 4.10!

  / Ishmael

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

• Satellite P100-347 - nVidia drivers day?

  Can support Toshiba fix some vista updated drivers for:

  Satellite P100-347... (pspa6e)

  This should be up to date on Toshiba site, because the drivers on
  NVIDIA.com do not work on my Toshiba laptop...

  Thnx

  It is well known that manufacturers of graphics support pages downloaded drivers cannot be installed on laptops. Each laptop manufacturer must ensure that display driver works well on the specific cell phone model and will not force the graphics card to run on the highest level.

  I hope you understand why laptop manufacturers do this.

  In any case, you can just hope that your message will be read by the Toshiba support service. ;)

• Instant stopping and restarting on Satellite P100-347

  My satellite P100-347 maintains close instantly then restart. All the solutions because its still new and very expensive for a replacement.

  Hello

  It seems that your machine is overheating and then he made a stop for reasons of physical security.
  You said that it happened when you play NFS carbon, it is a good sign for a cpu/vga heat problem.

  I suggest you to clean your fan and your cooling system, because when it s clobbed with of the dust of the system cannot be properly cooled and it is stopped to avoid serious damage to your valuable equipment. Just be a can of compressed air and clean your cooling system (but gently, otherwise you may damage the fan who convey the air that is heated from cpu/vga)

  Just a question: what drivers are installed for your vga? You have the original toshiba display drivers? If this isn't the case, then the problem is self explaining because schedules of the original nvidia/ati drivers are not suitable for laptops.

  Welcome them

• On my Satellite P100-347 cooling fan runs all the time

  Hello

  I think I might have a problem with the fan on my Satellite P100-347. He seems to be constantly works constantly and is much stronger than when I bought the computer. Initially he just spent and if so, I think that this could now be wrong.
  Help, please.

  Hi Beata

  I agree with the suggestions of Sanremo; He s I don't known how old your laptop has but from time to time it of necessary to clean the cooling fans. Dust and debris inside the laptop could prevent the cooling modules work properly!
  The fresh air flow is also very important. Don't forget that there is enough free space around the laptop. Do not use the laptop on the lap or in the bed. In this case the laptop cannot be cooled in the right way and the high temperature can damage parts such as GPU to the Board of Directors.

  But if you think that there is a serious hardware problem you must contact the service provider authorized in your country.

  Good luck and greetings to Poland ;)

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• Satellite P100-347: Blue Leds - they disabled/disabled?

  I read several topics in the forum on the P100 Harman/Kardon speakers Blue LEDs/lights. None expressed a definitive answer on how to turn off the LEDs.

  I was wondering if a new update on this issue has occurred. The last post of forum about this was in February. Is it possible to turn off those annoying lights in newer models of Satellite? I would disconnect the wires so its an easy task.

  My laptop is the Satellite P100 - 347 (SPA6E)

  Thank you very much

  Hi Dan

  Have you used advanced search forum?
  I don t think so!

  I have used and found several discussions on this topic.
  I searched in the section P satellite for blue light and learn from these publications:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16008&MessageID=58569
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19701&MessageID=72256

  Then why write something that has already been discussed here in the forum?

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• Satellite P100-347: How can I replace key caps

  How and where can I replace my Cap B and V on a computer laptop satellite P100-347.

  pls I need help quick and serious.

  Hello

  The replaceable keys and you can order this key to ASP in your country or check various online brokers who provide such Cap sets.

  Google a bit and you will find a lot of offers

• How to find the exact motherboard for Satellite P100-347 model?

  Hello
  I hope someone could help me. I'm looking for a new motherboard for my computer toshiba laptop because it replaced needs.

  I own a laptop Satellite P100-347 of pspa6e-03302cen and have not been able to find this anywhere online forum. Although I found two suppliers of many motherboards of p100, they use numbers of alternative model in which I can't find anywhere in my documents or on the computer. The model numbers they use are something like A000008350 or a number starting with k. I'm sure that the supplier I found has the motherboard, I would need but I would need a list of all the numbers of the other party for my laptop, or a way to find the exact numbers. Any help on this is appreciated...
  Thank you

  To be honest I really don't think that someone here can offer you this info. As you know, this info is for internal use and you can try to get this info from service provider authorized in your country. Sorry, but I don't see a better solution, except to wait here and hope someone can help.

  Good luck!

• I can't access my user account even if the password is correct.

  I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.

  Hello

  Something must have corrupted these accounts.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How the hell Manager access if I don't have the password

  How can I disable Manager access if I don't know the password

  It's a Microsoft Forum, when it comes to passwords we can provide only the official Microsoft solutions:

  "Cannot remove a forgotten Internet Explorer Ratings password"
    <>http://support.Microsoft.com/kb/155609 >

  HTH,
  JW

• How to remove the password of BIOS on Satellite Pro M10

  Hi guys,.

  I searched all over the web to find an answer, but has no success. So I really hope one of you can help out me.

  I have a very old Toshiba Satellite Pro M10 with 512 MB in it. The laptop is protected by a BIOS password that I know. However, the problem is that I want to remove the password of BIOS completely. I know this isn't a big deal, but I find it annoying to type the BIOS password over and over again. Mostly because I am preparing this old lady for my oldest daughter. Furthermore, I just installed Windows 7 and it works well, but I have all the original software Toshiba, for example the HW configuration utility. I expect the download somewhere on the net, but unfortunately this is not as simple as that.

  Any help is appreciated!

  Thank you

  Jeroen

  Hey Buddy,

  It is easy to remove the BIOS password. Follow the instructions posted by Al - eX.
  As new password just enter anything and then the password is removed.

  I m wondering that you have installed Windows 7 on Satellite Pro M10. It is a very old book, and in my opinion Windows XP would be the best choice.
  In addition there are no downloads available for this model and Windows 7 on Toshiba page