Cannot bind as < body > highlighted

Similar Questions

• Cannot bind to Active Directory with the configuration to Workspace Wizard

  Hi all!  I hope someone can point me in the right direction here.  I rode on the workspace VAPP yesterday and everything went beautifully until I reached the point where you set up the directory.  Here is where I am currently:

  -Type = ActiveDirectory Direcotry

  -Use SSL = unchecked

  -Server Host = IP of the DC (it is a GC)

  -Server Port = 3268 (also tried of 389)

  -Attribute search = sAMccountName

  -Base DN = DC = domain, DC = com

  -Bind DN = CN = horizon, OR = ServiceAccounts, DC = domain, DC = com

  -Bind password = *.

  I get the error below after selecting the parameter Test and sync button.  A few other notes of things I've tried so far are also listed below.

  Bind user DN has the fields firstname, lastname and email in the AD account.  Have tried both of our domain controllers (both are of the GC).  Also, we do not use LDAPS but allowed the "Microsoft network server: digitally signed communications (always)" enabled for all our servers, but do not see why it would make a difference wrt to LDAP. "

  Error saving configuration of the directory. Problem connecting to the directory.

  Bryan

  If domain controllers cannot communicate through port 636, it won't work, but you can run a command like ' openssl s_client-connect : 636 "and allows to print a cert. You can run this command from one of the machines VAPP workspace for example. You must copy the following text (including the BEGINNING and END of lines)

  -BEGIN CERTIFICATE-

  ....

  ....

  -CERTIFICATE OF END-

  And paste it into the certificate filed on the directory Workspace Wizard page.

• Cannot bind the parameter "network card"

  I want to disconnect the network cards on 500 vm - I created a new 'Action' by using the command 'Set-NetworkAdapter.

  I checked the following

  Copy

  Network card

  NetworkName

  StartConnected

  WakeOnLan

  Whenever I try to run it I get the following error

  "Could not bind the parameter ' NetworkAdapter" cannot convert the value "(adaptateur de réseau 1)" type VMware.VimAutomation "" "

  I tried to enter the following text

  NIC 1

  "NIC 1.

  (NIC 1)

  Nothing works - what don't get me?

  Thank you

  I answered your original question on PowerGUI/VESI virtualization/PowerShell forum.

  http://thevesi.org/thread.jspa?MessageID=28105淉

  Scott

• PLS-00304: cannot compile < package > body without its specification

  Hi all
  When compiling the below pasted together, I got the following error msg.
  

  PL/SQL: Compilation unit analysis terminated
  PLS-00304: cannot compile body of 'EDR_RPT_CLASS_BY_TAWT_PACKAGE'
  without its specification
  
  PLS-00905: object HDOT.EDR_RPT_CLASS_BY_TAWT_PACKAGE is invalid

  But me, which forfeit and ppackage specification of the body properly. Please could someone help me find the error
  
  

  CREATE OR REPLACE PACKAGE edr_rpt_class_by_tawt_package AS
  
  
  PROCEDURE edr_rpt_gen_class_by_tawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  );
  
  PROCEDURE edr_rpt_gen_class_by_fawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  );
  
  PROCEDURE edr_rpt_gen_class_by_sawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  );
  
  
  PROCEDURE edr_rpt_gen_class_by_triawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  );
  
  PROCEDURE edr_rpt_gen_class_by_qawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  );
  
  FUNCTION  class_count
  (
    in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
    in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
    in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
    iin_axle_wt_max             edr_cls_by_tawt_report_data.group_weight%TYPE,
    in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
    in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
  )
  RETURN VARCHAR2;
  
  
  END edr_rpt_class_by_tawt_package;
  /
  
  CREATE OR REPLACE PACKAGE BODY edr_rpt_class_by_tawt_package AS
  
     c_front_axle_only         CONSTANT axle_class.group_type%TYPE := -1;
     c_axle_single_group_type  CONSTANT axle_class.group_type%TYPE := 1;
     c_axle_tandem_group_type  CONSTANT axle_class.group_type%TYPE := 2;
     c_axle_tridem_group_type  CONSTANT axle_class.group_type%TYPE := 3;
     c_axle_quadrem_group_type CONSTANT axle_class.group_type%TYPE := 4;
     c_kips_conversion_unit_id CONSTANT units.unit_id%TYPE         := 8;
  
     v_report_axle_group_type  axle_class.group_type%TYPE := 0;
  
  
  FUNCTION  class_count
  (
    in_lane_id                  edr_rpt_by_ranges_output.lane_id%TYPE,
    in_direction_id             edr_rpt_by_ranges_output.direction_id%TYPE,
    in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_interval_end_date_time   edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
    in_axle_wt_min              edr_cls_by_tawt_report_data.group_weight%TYPE,
    in_axle_wt_max              edr_cls_by_tawt_report_data.group_weight%TYPE,
    in_class_min                edr_cls_by_tawt_report_data.vehicle_class%TYPE,
    in_class_max                edr_cls_by_tawt_report_data.vehicle_class%TYPE
  )
  RETURN NUMBER
  IS
    my_count_result NUMBER(18);
  BEGIN
  
     SELECT NVL(SUM(vehicle_count), 0 )
     INTO my_count_result
     FROM
         (
          SELECT site_lane_id
          FROM   edr_rpt_tmp_report_lanes
          WHERE  edr_rpt_tmp_report_lanes.output_lane_id        = in_lane_id
            AND  edr_rpt_tmp_report_lanes.output_direction_id   = in_direction_id
         ) report_lanes
     JOIN edr_cls_by_tawt_report_data
       ON edr_cls_by_tawt_report_data.site_lane_id          = report_lanes.site_lane_id
     WHERE edr_cls_by_tawt_report_data.bin_start_date_time >= in_interval_start_date_time
       AND edr_cls_by_tawt_report_data.bin_start_date_time <  in_interval_end_date_time
       AND edr_cls_by_tawt_report_data.group_weight >= in_axle_wt_min
       AND edr_cls_by_tawt_report_data.group_weight  < in_axle_wt_max  
       AND edr_cls_by_tawt_report_data.vehicle_class >= in_class_min
       AND edr_cls_by_tawt_report_data.vehicle_class <= in_class_max
       ;
  
     RETURN my_count_result;
  END;
  
  
  FUNCTION get_row_class_counts_text
  RETURN VARCHAR2
  IS
     my_row_counts_text  VARCHAR2(10000);
     my_row_counts_entry  VARCHAR2(10000);
  
     CURSOR row_counts_text IS
       SELECT 'edr_rpt_class_by_tawt_package.class_count('
                         ||'lane_id, '
                         ||'direction_id, '
                         ||'interval_start_date_time, '
                         ||'interval_end_date_time, '
                         ||'range_low, '
                         ||'range_high, '
                         || class_id || ', '
                         || class_id || ') "'|| class_id || '"'
       FROM edr_rpt_tmp_report_classes
       ORDER BY class_id;
  
  BEGIN
  
    my_row_counts_text   := '';
    my_row_counts_entry  := '';
  
    -- generate the speed ranges function calls
    OPEN row_counts_text;
    LOOP
  
      FETCH row_counts_text INTO my_row_counts_entry;
  
      EXIT WHEN row_counts_text%NOTFOUND;
  
      my_row_counts_text := my_row_counts_text || ', ' || my_row_counts_entry;
  
    END LOOP;
    CLOSE row_counts_text;
  
    RETURN my_row_counts_text;
  
  END;
  
  
  
  FUNCTION get_row_totals_text
  RETURN VARCHAR2
  IS
     my_row_count_total_text  VARCHAR2(10000);
  BEGIN
  
    my_row_count_total_text := '';
  
    -- generate the 'total' column function call
    SELECT 'edr_rpt_class_by_tawt_package.class_count('
                         ||'lane_id, '
                         ||'direction_id, '
                         ||'interval_start_date_time, '
                         ||'interval_end_date_time, '
                         ||'range_low, '
                         ||'range_high, '
                         || MIN(class_id) || ', '
                         || MAX(class_id) || ') " "'
    INTO my_row_count_total_text
    FROM edr_rpt_tmp_report_classes;
  
    RETURN ', ' || my_row_count_total_text;
  
  END;
  
  
  
  PROCEDURE apply_default_awt_ranges(in_report_parameter_id   IN   NUMBER)
  IS
  
    my_awt_ranges_count NUMBER(4);
  
  BEGIN
  
   SELECT nvl(count(1),0)
   INTO my_awt_ranges_count
   FROM report_range_parameters
   WHERE REPORT_PARAMETER_ID = in_report_parameter_id
     AND REPORT_PARAMETER_GROUP = 'AXLE_GROUP'
     AND REPORT_PARAMETER_NAME = 'AXLE_NAME';
  
   IF  ( my_awt_ranges_count = 0 )
   THEN
    INSERT INTO report_range_parameters (REPORT_PARAMETER_ID, REPORT_PARAMETER_GROUP, REPORT_PARAMETER_NAME, REPORT_PARAMETER_MIN_VALUE, REPORT_PARAMETER_MAX_VALUE)
      VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '0', '2'); 
      VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '30', '32');
   END IF;
  
  END;
  
  
  PROCEDURE edr_class_by_tawt_use_per_veh
  (
     in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
     in_good_status_mask      IN      NUMBER
  )
  IS
  
   max_axle_group_value NUMBER(12);
  
  BEGIN
  
    DELETE FROM edr_cls_by_tawt_report_data;
   
    COMMIT;
  
    INSERT INTO edr_cls_by_tawt_report_data
                  (
                    site_id,
                    site_lane_id,
                    site_direction_id,
                    site_direction_name,
                    bin_start_date_time,
                    group_weight,
                    bin_id,
                    bin_value
                   )
    SELECT site_id,
           site_lane_id,
           site_direction_id,
           site_direction_name,
           date_time,
           group_weight,
           vehicle_class,
           COUNT(vehicle_class)
    FROM
           (
             SELECT edr_cls_by_tawt_per_veh_data.*
               FROM edr_cls_by_tawt_per_veh_data           
       GROUP BY date_time,
             site_lane_id,
             group_weight,
             vehicle_class,
             site_id,
             site_direction_id,
             site_direction_name;
  
  END edr_class_by_tawt_use_per_veh;
  
  
  PROCEDURE edr_class_by_tawt_data_type
  (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    in_good_status_mask      IN      NUMBER,
    in_data_type             IN      VARCHAR2,
    out_data_type_used          OUT  VARCHAR2
  )
  IS
    my_bin_entry_count   NUMBER(12,0);
    my_veh_entry_count   NUMBER(12,0);
  BEGIN
  
    IF(UPPER(in_data_type) = 'BINNED') THEN
  
      --  Axle information can only be read from Per Vehicle data records
      --   - using bins-only is not a supported option
      RAISE_APPLICATION_ERROR(-20101,'Binned data cannot be used for this report.');
  
  
    ELSIF    (UPPER(in_data_type) = 'PERVEHICLE')
          OR (UPPER(in_data_type) = 'COMBINED')
    THEN
  
      out_data_type_used := 'Per Vehicle (All Vehicles)';
  
      edr_class_by_tawt_use_per_veh( in_report_parameter_id, in_good_status_mask );
  
    ELSE
       RAISE_APPLICATION_ERROR(-20101,'The data type specified is not recognized.');
    END IF;
  
  END edr_class_by_tawt_data_type;
  
  
  PROCEDURE edr_class_by_tawt_get_veh_data
  (
    in_report_parameter_id   IN   NUMBER,
    in_site_id               IN   NUMBER,
    in_start_date_time       IN   TIMESTAMP,
    in_end_date_time         IN   TIMESTAMP,
    in_report_level_min      IN   NUMBER,
    in_report_level_max      IN   NUMBER
  )
  IS
  
  BEGIN
   
    DELETE FROM edr_cls_by_tawt_per_veh_data;
  
    INSERT INTO edr_cls_by_tawt_per_veh_data
          (
            site_id,
            site_lane_id,
            site_direction_id,
            site_direction_name,
            record_id,
            date_time,
            group_weight,
            vehicle_class,
            group_number,
            vehicle_status,
            vehicle_error_count,
            axle_violations_count,
            group_type          
          )
    SELECT axle_info.site_id,
           axle_info.site_lane_id,
           axle_info.site_direction_id,
           axle_info.site_direction_name,
           axle_info.record_id,
           axle_info.datetime,
           axle_info.group_weight,
           axle_info.v_class,
           axle_info.group_number,
           NVL((SELECT SUM(status_code)
                  FROM traffic_status
                 WHERE traffic_status.record_id = axle_info.record_id), 0) vehicle_status,
           NVL((SELECT COUNT(error_code)
                  FROM traffic_error
                 WHERE traffic_error.record_id = axle_info.record_id), 0) vehicle_error_count,
           NVL((SELECT COUNT(1)
                  FROM axle_weight_violation
                 WHERE axle_weight_violation.record_id = axle_info.record_id), 0) axle_violations_count,
           axle_info.group_type            
      FROM (SELECT site_to_data_source_lane_v.site_id,
                   site_to_data_source_lane_v.site_lane_id,
                   site_to_data_source_lane_v.site_direction_id,
                   site_to_data_source_lane_v.site_direction_name,
                   traffic_record.record_id,
                   traffic_record.datetime,
                   NVL(traffic_class.v_class, 0)   v_class,
                   NVL(axle_class.group_type, 0)   group_type,
                   NVL(axle_class.group_number, 0) group_number,                
                   NVL(TRUNC(sum(convert_units(axle.weight_unit_id,
                                           c_kips_conversion_unit_id,
                                           axle.axle_weight
                                          )
                             )
                         ),
                         0
                       ) group_weight
             FROM  traffic_record
             JOIN  site_to_data_source_lane_v
               ON  traffic_record.data_source_id = site_to_data_source_lane_v.data_source_id
              AND  traffic_record.lane = site_to_data_source_lane_v.data_source_lane_id                    
         GROUP BY site_to_data_source_lane_v.site_id,
                   site_to_data_source_lane_v.site_lane_id,
                   site_to_data_source_lane_v.site_direction_id,
                   site_to_data_source_lane_v.site_direction_name,
                   traffic_record.record_id,
                   traffic_record.datetime,
                   traffic_class.v_class,                 
                   axle_class.group_type,
                   axle_class.group_number
          ) axle_info
     
  
  END edr_class_by_tawt_get_veh_data;
  
  
  PROCEDURE gen_class_by_axle_type
  (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  
   
  BEGIN
   
    apply_default_awt_ranges(in_report_parameter_id);
  
    my_date_format_mask   := edr_rpt_generic_package.edr_rpt_get_date_format_mask(in_report_parameter_id);
    my_start_date_time    := edr_rpt_generic_package.edr_rpt_get_start_date_time(in_report_parameter_id, my_date_format_mask);
    my_end_date_time      := edr_rpt_generic_package.edr_rpt_get_end_date_time(in_report_parameter_id, my_date_format_mask);
    my_lane_grouping      := edr_rpt_generic_package.edr_rpt_get_lane_grouping(in_report_parameter_id);
    my_site_id            := edr_rpt_generic_package.edr_rpt_get_site_id(in_report_parameter_id);
    my_selected_data_type := edr_rpt_generic_package.edr_rpt_get_data_type(in_report_parameter_id);
  
    -- ensure selected classes and lanes temp tables have been populated
    edr_rpt_generic_package.edr_rpt_gen_tmp_lanes(in_report_parameter_id);
    edr_rpt_generic_package.edr_rpt_gen_tmp_classes(in_report_parameter_id);
    edr_rpt_generic_package.edr_rpt_gen_tmp_speed_ranges(in_report_parameter_id);
  
    my_good_weight_statuses_mask   := edr_rpt_generic_package.get_good_weight_status_mask(in_report_parameter_id);
  
  
    edr_rpt_generic_package.edr_rpt_gen_inclusion_table
    (
      in_report_parameter_id,
      my_date_format_mask,
      my_start_date_time,
      my_end_date_time
    );
  
    edr_rpt_generic_package.edr_rpt_gen_grouping_table
    (
      in_report_parameter_id,
      my_date_format_mask,
      my_start_date_time,
      my_end_date_time
    );
  
    edr_class_by_tawt_get_veh_data
    (
      in_report_parameter_id,
      my_site_id,
      my_start_date_time,
      my_end_date_time,
      0,                          --Hardcoded until reclassification is supported.
      0                           --Hardcoded until reclassification is supported.
    );
  
    edr_class_by_tawt_data_type
    (
      in_report_parameter_id,
      my_good_weight_statuses_mask,
      my_selected_data_type,
      my_used_data_type
    );
  
  
    edr_rpt_generic_package.gen_rpt_by_ranges_output_table
    (
      in_report_parameter_id,
      'AXLE_GROUP',
      'AXLE_NAME'
    );
  
    COMMIT;
    my_report_data_statement :=
        ' SELECT rank "Rank", '
      ||       ' row_type "Row Type", '
      ||       ' interval_start_date_time "Date", '
      ||       ' interval_start_date_time, '
      ||       ' range_label "Chart X-Axis", '
      ||       ' lane_id "Group Id" , '
      ||       ' ''None'' "Group Name", '
      ||       ' range_label "Speed (mph)" '
      ||         get_row_class_counts_text
      ||         get_row_totals_text
      ||       ' FROM edr_rpt_by_ranges_output '
      ||       ' ORDER BY lane_id, '
      ||                ' direction_id, '
      ||                ' interval_start_date_time, '
      ||                ' range_high, '
      ||                ' rank, '
      ||                ' range_low'
      ;
  
    dbms_output.put_line('SQL start------------------------');
    dbms_output.put_line(my_report_data_statement);
    dbms_output.put_line('SQL end--------------------------');
  
  
    my_chart_data_statement :=
         ' SELECT range_low "X Axis", '
      ||        ' lane_id "Group" '
      ||         get_row_class_counts_text
      || ' FROM '
      || ' ( '
      || ' SELECT lane_id, '
      ||        ' direction_id, '
      ||        ' range_low, '
      ||        ' range_high, '
      ||        ' min(interval_start_date_time) interval_start_date_time, '
      ||        ' max(interval_end_date_time) interval_end_date_time '
      || ' FROM edr_rpt_by_ranges_output '
      || ' WHERE rank = 1 '
      || ' GROUP BY lane_id, direction_id, range_low,  range_high '
      || ' ) '
      || ' order by "Group", range_low '
      ;
  
    dbms_output.put_line('SQL start------------------------');
    dbms_output.put_line(my_chart_data_statement);
    dbms_output.put_line('SQL end--------------------------');
  
  
  
    SELECT my_used_data_type
      INTO my_data_type_used
      FROM SYS.DUAL;
  
    SELECT NVL(COUNT(DISTINCT record_id), 0)
      INTO my_per_vehicle_total
      FROM edr_cls_by_tawt_per_veh_data;
  
    SELECT NVL(COUNT(DISTINCT record_id), 0)
      INTO my_status_vehicle_total
      FROM edr_cls_by_tawt_per_veh_data
     WHERE vehicle_status > 0
       AND vehicle_error_count = 0;
  
  
    SELECT NVL(COUNT(DISTINCT record_id), 0)
      INTO my_error_vehicle_total
      FROM edr_cls_by_tawt_per_veh_data
     WHERE vehicle_error_count > 0;
  
  
    SELECT NVL(COUNT(DISTINCT record_id), 0)
      INTO my_status_clear_total
      FROM edr_cls_by_tawt_per_veh_data
     WHERE vehicle_status = 0
       AND vehicle_error_count = 0;
  
  
    SELECT NVL(COUNT(1), 0)
      INTO my_binned_vehicle_total
      FROM edr_cls_by_tawt_per_veh_data;
  
    SELECT NVL(COUNT(1), 0)
      INTO my_good_weight_total
      FROM edr_cls_by_tawt_per_veh_data
     WHERE vehicle_error_count = 0
       AND BITAND(vehicle_status, my_good_weight_statuses_mask) = 0;
  
    -- insert vehicle totals into the temporary table
    DELETE FROM edr_rpt_tmp_veh_totals_table;
  
    INSERT INTO edr_rpt_tmp_veh_totals_table
    SELECT my_data_type_used,
           my_per_vehicle_total,
           my_binned_vehicle_total,
           my_error_vehicle_total,
           my_status_vehicle_total,
           my_good_weight_total,
           my_status_clear_total
      FROM SYS.DUAL;
  
    -- execute the query into the output refcursor
    OPEN report_data FOR
      my_report_data_statement;
  
    OPEN chart_data FOR
      my_chart_data_statement;
  
    OPEN footer_data FOR
      SELECT data_type_used,
             per_vehicle_total,
             binned_vehicle_total,
             error_vehicle_total,
             status_vehicle_total,
             good_weight_total,
             status_clear_total
        FROM edr_rpt_tmp_veh_totals_table;
  
  END gen_class_by_axle_type;
  
  PROCEDURE edr_rpt_gen_class_by_sawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  BEGIN
    v_report_axle_group_type := c_axle_single_group_type;
    gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
  END;
  
  PROCEDURE edr_rpt_gen_class_by_fawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  BEGIN
    v_report_axle_group_type := c_front_axle_only ;
    gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
  END;
  
  PROCEDURE edr_rpt_gen_class_by_tawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  BEGIN
    v_report_axle_group_type := c_axle_tandem_group_type;
    gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
  END;
  
  PROCEDURE edr_rpt_gen_class_by_triawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  BEGIN
    v_report_axle_group_type := c_axle_tridem_group_type;
    gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
  END;
  
  PROCEDURE edr_rpt_gen_class_by_qawt (
    in_report_parameter_id   IN      report_tasks.report_task_id%TYPE,
    report_data              OUT     SYS_REFCURSOR,
    chart_data               OUT     SYS_REFCURSOR,
    footer_data              OUT     SYS_REFCURSOR
  )
  AS
  BEGIN
    v_report_axle_group_type :=  c_axle_quadrem_group_type;
    gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
  END;
  
  END edr_rpt_class_by_tawt_package;
  /
  
  
  LIST
  
  SHOW ERROR

  FUNCTION RETURN VARCHAR2 class_count in package specifications and
  FUNCTION RETURN NUMBER class_count in the package body.
  change the type of data SERVICE class_count

• Cannot bind to an IN clause

   v_sql1 :=  'SELECT DISTINCT makeup.loopid 
                      BULK COLLECT INTO  o_segment_id_list 
               FROM   potential_loop_makeup makeup,
                      loop_segment_association  assoc 
               WHERE  makeup.loopid = assoc.loopid and
                      makeup.provision =3 
           
                      AND  assoc._number = 2 
                      AND  assoc.id in (:segmentidlist)';
                      
       EXECUTE IMMEDIATE v_sql1 BULK COLLECT INTO o_segment_id_list USING  SELECT *  FROM (TABLE(CAST( i_segment_id_list AS T_GENERAL_NUMLIST))))      
       

  pl help.
  I get the compile error
  For NRMS_INTERFACE BODY of PACKAGE compile errors. PKGNDWAPI
  
  Error: PLS-00103: encountered the symbol "SELECT" at the expected in the following way:
  
  (- + case in mod new not null < an ID >)
  < between double quote delimited identifiers of > < a variable binding > avg
  current account is min max sql stddev sum variance prior
  execute forall time timestamp interval date fusion
  < a literal string with character set specification >
  < a > < a SQL string between single quotes > hose
  Online: 215
  Text: RUN v_sql1 IMMEDIATE IN BULK COLLECT INTO o_segment_id_list to the HELP of SELECT * FROM (TABLE (CAST (i_segment_id_list AS cramer.)) T_GENERAL_NUMLIST)))
  
  Error: PLS-00103: encountered the symbol "TABLE" when awaits one of the following values:
  
  (select

  2 and 3 are literals, so they would not bind variable. You can create variables with the values 2 and 3 and use these local variables in your SQL statement, but that is very likely to be a useful exercise and could cause problems.

  It seems that your goal is to ensure that the optimizer does not change the plan. The optimizer is much more likely to change a plan (or choose a bad plan) when using the bind variable rather than when using constants. Estimating the selectivity of a disease such as optimizer

  makeup.provision =3 
  

  is likely to be more stable than its estimate of the selectivity of a condition as the

  makeup.provision = local_variable_with_a_value_of_3
  

  Depending on the version of Oracle, the optimizer would be I hope use bind variable peeking in the latter case, the value is 3 and generate the same plan. But if you happen to have the same SQL statement elsewhere where bind values are different, there is a low risk that the optimizer choose a different plan.

  If you really want to make sure that the plan remains constant, contours and/or plan stability depending on the version of Oracle is really appropriate tools. Any time you let the optimizer generates a query plan, you have the potential for the optimizer to generate a different plan because statistics of the object, the optimizer settings, session, statistics the system settings, etc. have changed.

  Justin

• Cannot move icons or highlighted text

  I just bought a new MacBook and can't highlight text using the trackpad or move normal icons with the 3 finger drag. I don't see anywhere in the settings to change that. I do something wrong after all these years?

  Thank you.

  Maybe this will help. https://support.Apple.com/en-us/HT204609

• Cannot bind to Amazon Video

  I can't my dashboard link to Amazon video on demand Service. When you click on 'Link to Service' on the custom music and video page, it takes me to an Amazon page with the following message: "we have linking your BRAVIA Internet Video link to your Amazon.com account. Please retry the binding process in a few minutes. If the binding process fails several times, please contact Amazon customer service. »

  I contacted Amazon support and received the following response: "right now, the dashboard of Sony is not a device supported for Amazon Video on demand content. I'm sorry for the disappointment. »

  It seems that others on this forum have been able to access their video on demand from the dashboard accounts, any help would be appreciated.

  Thank you for your message.
  There are no problems now with the implementation of a company account. This may be a problem with the link to the essential. Please give our support team a call for assistance with your essential links will refuse.

• Cannot bind to the shared object created with LabVIEW 2009

  I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

  To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

  When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

  cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1
  

  Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

  In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

  My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

  Any ideas how I could fix the build errors?

  Thanks in advance for your suggestions.

  PS.

  I enclose a tar file with the source files and here are the details of the ldd:

  ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)
  
  ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)
  

  Hi mimi,

  I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

  In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

  The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

  strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW
  

  strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW
  

  So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

  With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

  .PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/
  
  all: test
  
  clean:        rm -f test *.o
  

  When you try to run the application, I got the following error:

  ./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied
  

  But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
  This can be disabled by running /usr/sbin/setenforce 0 as root.

  The test application now works!

  See you soon,.

  RW

• cannot read the body of my email in outlook express 6

  02 days now, I try to read the body of my email in outlook express 6, I use Windows XP

  I try a lot of things like write running but not using regsvr32 inetcomm.dll
  I wish you could help us
  Concerning
  Faustina

  Hello

  I've had this problem twice now and have gotten the final solution:
  It's all about your Temp files. To delete them. The best way is to use a software called . He basically cleared your PC but also get rid of Temp files. It is very clean, simple and safe. It just does the job perfectly for me.
  The link is here:
  See you soon.

• Cannot bind two family security accounts

  I have Setup parental controls for my family on a laptop running Windows 8.1. We also have a Windows 7 PC that I installed the safety on.

  However, I am unable to link accounts created with the 8.1 parental Windows with Windows 7 users. When you set up parental control the fall down to the two children has not been shown in the accounts to map to-only accounts of both parents were shown. That's why I had to add a new user, and now I have two users for the same child who, of course, makes it a bit difficult to manage restrictions etc and also translates into several emails per child.

  Doing a brief search, I came across a reference to a feature to "bind the members of the family" but I am unable to find it anywhere on the Family Safety website.

  Anyone have any ideas on how to get users of Windows 7 and Windows 8.1 related between them?

  Good luck but I don't think you can link family safety on two different platforms.  I can't find anything to suggest that you can.

  What's new in Windows 8 family security

  Family Safety: FAQ

• Cannot bind Syslog port FM5.07...

  Dear all,

  We have Fabric Manager 5.07 installed on Windows Server 2008. Everything works fine without this little problem:

  Whenever I start FM I get this error message:

  Standalone FM was unable to bind to the port of Syslog, as it was already in use, this may mean that another instance of the application is already running.

  But there is no other instance running and since now I was not able to overcome this problem...

  Does anyone have an idea how to solve this problem? Which ports to check where I can configure which ports FM will use to syslog?

  Best regards

  Werner

  Hi Werner,.

  SYSLOG is 514 UDP port.  Normally, this means that another program is running and using the port 514.

  Some TFTP servers are also the SYSLOG servers and 'listens' on this port.

  You can see if port 514 look with Fabric Manager does not.

  To find out what is using port 514:

  b. open a command prompt window.  Start / Run type: cmd

  (b) from the command prompt type: netstat - ano

  (c) note the PID (process identifier) with the ports that you care about.  (Note also the local address, the address abroad, the Protocol and the State).

  (d) then do ctrl-alt-del to bring up Windows Task Manager.

  (e) in the Windows Task Manager, select the processes tab.

  (f), find the PID you noticed when you did the netstat in step (c).  Look left for the name of the image and that tells you what process has that PID.

  -If you do not have a PID column, click view / select columns.  Make sure PID is selected.  Click OK.

  -Of course show processes from all users is selected.

  Now you can see which process is using port 514.  FM would be qualified bird javaw.exe (java exec without a console window).

  Best regards

  Jim

• Cannot bind the text as an Email.

  Hi, I have covered with a graphic of the text (my email address) and try to link this text as an e-mail link to contact us.  When I tried to export the site in HTML format, the following dialog box appears:

  Hyperlinks applied to text inside a raster image cannot be exported.  You must change the text block to not require pixelation (by adjusting the police or rotation) or remove the hyperlink applied to the text before exporting it.

  I wonder if anyone can help me on this subject and explain exactly what is meaning.  Thank you.

  This error comes if you have added an effect or used the system in the text font and then added the hyperlink, you must remove all the fonts system or effect that will solve the problem.

  Thank you

  Sanjit

• Blog customized in Adobe Muse and British Colombia cannot get the body copy css to work

  Hello

  I created a blog through Adobe Muse and Business Catalyst customized instructions, I found in a video.

  Seems like everything works most of the time with the addition of styles custom to modulestylesheets.css however, not for the life of me I can get the text of the

  blog to cooperate. At least according to the video I am following.

  It's the css instructions, I add, and it is the only part that doesn't work - will not change. My guess is something somewhere else than this horse, but I'm not.
  
  / * body of the blog text * /.
  . post-Corps
  {
  color: #534741;! important;
  Police-family: muli; without-serif;! important;
  do-size: 12px;! important;
  Police-weight: 400;! important;
  padding: 0;! important;
  line-height: 84px;! important;
  }

  As you can see - I even added the tag to see if it would work, but still nothing. I am at a loss and need to have this site complete and launched with new area tonight!

  The link:
  http://lisastendig.BusinessCatalyst.com/embodiment-blog

  I'm trying to get the copy of body to be the Muli police but also with a few good Interline spacing.

  I hope that someone can help you today - so it would be very appreciated. Thank you!

  Hi BubbleHouse,

  I checked the layout of details of blogs and seems family of police entered the embed code of the blog and it is preceedence containing the css system.

  You can go to the blog content and change the font family: calibri, serif police-family: inherit, it should take the modulestylesheet.css police

  Kind regards
  Radi amin

• Cannot open my BODY CC project more

  Hello everyone,

  First Pro CC crashed during my work on a big project (TV show) french. When I tried to open my project, first start normally, start opening the project (orange loading bar) and when the orange bar is approximately arround 20% load, the Prime Minister hangs and nothing happened. So I can't open my project more.

  -J' checked my Auto save and they are too old to leave again

  -J' tried to unzip my file corrupt PRPROJ (rename XXX.zip and extract, then add the .xml extension) and open the extracted xml of XML key. Run the tests the integrity of the key XML and everything is ok.

  -J' tried the MAC digital rebellion-"Pro Maintenance Tool" software to repair my project. The software indicates its repair but does not open the new project, exactly like that...

  -J' tried to import the project corrupted in a cache of new one-> start of loading then freeze

  -J' tried to open the corrupted project windows in a Mac version, on a different disk, without media: same problem.

  -I'm analyzing the file deletion in my project file, hoping that PR has left traces of not temporary files when saving my project corrupted before the crash...

  I am completely lost and cannot afford to spend more time trying to get my project. Does anyone have an idea to save my life? ...

  My corrupt project can be downloaded here: http://we.tl/B2SsrfApdQ

  I home that someone can help me... otherwise I have to redo all my work

  Thank you!!

  noar
  

  My configuration:

  First Pro CC 7.1

  Windows 8.1

  PS: Why my automatic backup are so old? Yesterday... It is configured to save every 15 minutes and keep 20 copies. I have only 5
  

  The project file seems fine. It charge successfully for me.

• Cannot bind Media

  I apologize if there is already a topic about this. I've traveled and don't see.

  I use CS5 Premiere Pro for the first time in my class of digital video. We are working on Mac in the classroom and I downloaded a trial of the program to my laptop which is running Windows 7. However, when I try to open the file that I worked in class, I get an error that says: "impossible to link Media: the selected file cannot be linked because its (audio) type does not match the type of original (audio and video) file." What should I do to fix this? I need to work on this project at home.

  What types of files work? I suspect you may experience one of the

  limitations of the trial version.