Cannot bind to Active Directory with the configuration to Workspace Wizard

Similar Questions

• Configuration of Active Directory with the OIM 11 g

  Hi all
  
  
  
  I installed OIM 11 g on windows 7. and I have one Active Directory server to another Machine.
  
  I installed the connector server in my local machine (windows 7).
  and HE created resources for AD and connector server... everything worked well.
  
  But, when I run the Active Directory organization seek Recon, is throw 'not found error in the field of the domain controller.
  
  
  Please help me on this
  1. what field I need to give to the Active Directory resource.
  
  2. any changes to do because the ad is in another Machine
  
  
  
  
  
  Thank you
  Kumar

  Connector server and AD must reside on the same domain. Install server connector on the computer where is installed the AD and check.

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• No users in Active Directory in the Shared Services

  I have configured MSAD in Shared about, EPM 11.1.2.2 on Server 2008 R2 64-bit Windows, but no users or groups are listed.  I restarted all services of EPM and IIS.  I don't get any errors, simply nothing appear under the directory in the console of Shared Services.  How can I find out why it doesn't work?

  If you do not see users then remove the configuration of the Group probably won't do something but it does not hurt to try, if there are errors with the configuration it should be in the newspapers, are you sure that the account that you have configured the external directory with can see users, is the correct user RDN. It can be interesting to use a LDAP browser and find the same configuration to see if it recovers users, if not then you would need to discuss with someone who administers the AD.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Workstation HP Z240 tour: easy access boot with the configuration of the BIOS?

  Is it possible to have ease of access begins with the configuration of the BIOS?

  Is it possible to have by pressing F10, etc. also start the tool for easy access?

  Is it posible to invert the colors of the BIOS Setup?

  :-)

  If I understand your question, here are the answers

  Is it possible to have ease of access begins with the configuration of the BIOS? This is a feature of Windows, is not available in the BIOS

  Is it possible to have by pressing F10, etc. also start the tool for easy access? See above

  Is it posible to invert the colors of the BIOS Setup? NO.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• "Printer settings not comply with the configuration of the router.

  Hello

  I'm trying to establish a wireless connection with my printer to my computer, but the answer above, "printer settings not comply with the configuration of the router" someone has the solution please. Peter

  Hello

   
  • What is the brand and model of the printer?
   
  You can check this link:
   
  Network printer problems
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
   
  I also suggest you to check the manufacturer support for assistance to correct the settings of the printer.

• cannot log on as administrator with the password and open a user button session sends to the temporary profile.

  cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk.  She lost all access to his information.

  Original title: cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.

  Hello

  • Remember to make changes to your computer before this problem started?

  However, you can access the link below and follow the steps mentioned in the article and check if it helps you to fix the problem, and connect you to your normal user account.

  http://support.Microsoft.com/kb/947242

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Active Directory and the Source of data in Application Weblogic

  Hello

  I was asked to find a way to record information of users created via Active Directory in my datasource request so my application can control if the user as authorization.

  My application, services to extract the data and the data source will be in the weblogic.

  What I found so far that there was to be a supplier Active Directory in the weblogic for authentication, and it will work similar to the SQL provider, put all the users and groups in the weblogic.

  Basically which, according to me, I have to do is create something (service or DB package function perhaps) that will allow to establish synchronization between the two AD and my database somehow.

  How I can do it, or there is an easier way to do it?

  Thank you

  Hello

  Yes, that is what I suggested in my initial post. In some scenarios, I also use JAVA API for details of user AD and works pretty well.

  Thank you

  Amey

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• When you try to add 'fédération Service Active Directory' in the VM, it fails with exception after clicking on the last step of the wizard.

  Log Event Viewer as below.

  *****************************************************************

  Event log:

  Log name: Microsoft-Windows-ServerManager/Operational
  Source: Microsoft-Windows-ServerManager
  Date: 07/03/2012 18:09:06
  Event ID: 1600
  Task category: no
  Level: error
  Keywords:
  User: HDC\Administrator
  Computer: Win2K8HDCRoot.HDC.Com
  Description:
  An error has occurred in the Server Manager. An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1600
      0
      2
      0
      0
      0 x 1000000000000000
     
      15
     
     
      Microsoft-Windows-ServerManager/Operational
      Win2K8HDCRoot.hDC.com
     
   
   
      http://schemas.Microsoft.com/win/2004/08/events"xmlns ="Event_NS">
        An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)
  
     
   
  

  *****************************************************************

  Details of home:

  Win 2K 8 R2 Enterprise
  Processor: Xeon x 3440
  Roles: Hyper-V, file Services
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  Virtual machines running: 6
  Total none of the network adapters: 2
  1 NETWORK card: (Intel (r) 82578DM Gigabit Network Connection is connected to service internet broadback. "Statis IP" is set for my server.
  Not virtual networks: 2
  Virtual Network 1 is "External" type and connected to the NIC1. The value settings IPv4/IPv6 IP addresses and DNS automatic.
  Virtual Network 2 is of the type 'internal '. IPv4/IPv6 settings is set to Auto for IP and DNS addresses.

  *****************************************************************

  Information on the virtual machine:

  Win 2K 8 R2 Standard
  Roles; "Domain service active Directory", "DNS Server", "File Services" and "Web Server (IIS).
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  None of the network adapters: 2
  Network adapter 1 connected to 'Internal' with IPv4 set to a static IP address '192.168.10.1 ' and DNS set to ' 127.0.0.1'. IPv6 is disabled
  Network 2 connected to 'External' and IPv4 adapter set to automatic for the IP and DNS addresses. IPv6 is disabled
  Domain controller for HDC.Com.

  *****************************************************************

  History of the virtual machine:

  Initially, she felt just VS2010 and SP2010 installed without DNS and AD DS roles added. Later, we VS and SP2010 has been uninstalled via the Control Panel, as well as other programs, I can't recall. Then added roles DNS and Active Directory domain to create and control the field x ".com". After a few days, another virtual computer has been configured in the same way and 'AD FS' role added to try app based on the claims. In the coming days, all of the roles above have been removed and added to create and control the current domain ' HDC. Com'. Before this step, the self-signed certificates that have been installed as part of the App claims have been removed from MMC, and IIS services. Don't forget to change the name of the computer as well.

  *****************************************************************
  I'm not good at bases of the any tried out above learning, but ask the members of the scholarly community to help me solve the problem and I'm sorry if I ask some silly questions as part of this thread.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
  TechNet Forums -http://social.technet.microsoft.com/Forums/en/categories/

• Problem with Active Directory and the NAC

  Hello.

  Please I need help.

  I have my server with the "Active Directory SSO" began, but when a user tries to connect to the network with its credentials in Active Directory, the PC agent say that 'Invalid username and password.

  My server is tuned by the 8910 port.

  I conectivity with CBS and active directory.

  kpass command runs successfully.

  Thks.

  Jorge,

  If the service is running, then you must put emphasis on the communication client/AD and see where the break occurs.

  Can you ensure that the unauthenticated role, you have all the required TCP/UDP ports open, and ICMP and IP FRAGMENTS to all your domain controllers?

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• ActiveSync with Active Directory and the custom search filter returns nothing

  Hello
  
  I use ActiveSync to update the Active Directory user accounts in the IDM repository.
  
  The search is based on the uSNChanged attribute to find the last modified accounts.
  
  I'm trying to set a search filter in my resource Active Directory synchronization strategy that is combined with the default
  
  I expect to see this filter on the balls
  (& (objectClass = user) (objectCategory = person) (myCustomAttribute = value) (uSNChanged > = 8003748))
  
  But Active Directory receive it:
  (& (objectClass = user) (objectCategory = person) (FALSE) (uSNChanged > = 8003748))
  
  If the query never returns from the objects.
  
  Can someone help me solve this problem?
  
  Thanks in advance
  
  Edited by: user1657029 Apr 23. 2013 15:52

  Problem solved. My custom attribute was not on the global catalog in Active Directory