Cannot change data values

Similar Questions

• Cannot change the value of mousewheel scroll

  After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have responded that I had to access about: config and change the value of mousewheel.withnokey.numlines.

  However, when you access everything: config, I discovered that not only I don't the integer specified, I don't have any integer with a preferably name that contains "withnokey", so I tried to add it in me, but not to use. Currently my parchment done on lines 6 and 7 and I would like to go down to about 3.

  Hello, Skarlath, the scrolling behavior has been overhauled in firefox 17 (see for reference https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrollingtechnical information) - the old setting longer reverberate.

  It must still be possible to set a different frame rate. You can enter about: config in the firefox address bar (confirm the message information where it appears), search preferences starting with mousewheel.default.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings is taken into account.

• Cannot change the value of the cells during execution of the VI

  Hello

  I'm changing the values in the table while the VI is on, but without success, can anyone show me please how to do this.

  Thank you

  MGarry

  MGarry,

  something like this:

  

  Please note that this does not reset the contents of the table if you rerun the VI. You can add code to it.

  Norbert

• Cannot change the value of an attribute

  I'm having a lot of trouble trying to change the value of an attribute in a document in my database. I get the error message:

  Transaction specified for a non-transactional database
  Nov 26, 2008 9:35:02 AM com.kitfox.db.BaseLocal processRequest
  SEVERE: null
  com.sleepycat.dbxml.XmlException: Error: Invalid argument, errcode = DATABASE_ERROR
          at com.sleepycat.dbxml.dbxml_javaJNI.XmlQueryExpression_execute__SWIG_1(Native Method)
          at com.sleepycat.dbxml.XmlQueryExpression.execute(XmlQueryExpression.java:89)

  However, the database is configured to perform operations:

          try {
              EnvironmentConfig config = new EnvironmentConfig();
              config.setAllowCreate(createIfAbsent);
              config.setInitializeLocking(true);
              config.setInitializeLogging(true);
              config.setInitializeCache(true);
              config.setTransactional(true);
              config.setRunRecovery(true);
              config.setThreaded(true);
              //config.setLockDetectMode(LockDetectMode.DEFAULT);
  
              env = new Environment(home, config);
  
              XmlManagerConfig managerConfig = new XmlManagerConfig();
              managerConfig.setAllowAutoOpen(true);
              managerConfig.setAdoptEnvironment(true);
              managerConfig.setAllowExternalAccess(true);
              manager = new XmlManager(env, managerConfig);
  
              manager.setDefaultContainerType(XmlContainer.NodeContainer);
              
              manager.registerResolver(resolver);
  
              if (manager.existsContainer(CONTAINER_NAME) == 0) {
                  container = manager.createContainer(CONTAINER_NAME);
  
                  //Add index
                  {
                      XmlIndexSpecification is = container.getIndexSpecification();
                      is.addIndex(GAMEBASE_NS, "uid", "node-element-presence-none unique-edge-attribute-equality-decimal");
                      is.addIndex(GAMEBASE_NS, "name", "node-element-presence-none edge-attribute-equality-string");
  
                      XmlUpdateContext uc = manager.createUpdateContext();
                      container.setIndexSpecification(is, uc);
                      is.delete();
                  }
                  
                  //Initial document
                  {
                      InputStream is = null;
                      XmlInputStream xin = null;
                      URL initXml = getClass().getResource("/com/kitfox/db/dbInit.xml");
                      is = initXml.openStream();
  
                      xin = manager.createInputStream(is);
  
                      container.putDocument(DOCUMENT_NAME, xin);
                      xin.delete();
                  }
  
              } else {
                  container = manager.openContainer(CONTAINER_NAME);
              }

  While I am able to update my document by running insert or remove instructions independently, they fail:

      let $dir := $repository//gb:directory[@gb:uid=$cmd/@uid]
      return
          replace value of node $dir/@gb:name with "blorp"
  
      let $dir := $repository//gb:directory[@gb:uid=$cmd/@uid]
      return
          (delete node $dir/@gb:name,
          insert node (attribute gb:name {"bigbird"}) into $dir)

  Any idea what goes wrong? How can I change my attribute value?
  
  Published by: kitfox on November 26, 2008 09:48

  The problem is that even if your environment is configured to use transactions, your container is not. Set up for using transactions is a process in two steps, first of all, you must set up the environment that you did, then you must configure each container in the environment, what you can do as follows:

  XmlContainerConfig config = new XmlContainerConfig();
  config.setTransactional(true);
  container = manager.createContainer(CONTAINER_NAME, config);
  

  The same steps are used to open the container.

  Lauren Foutz

• Cannot insert date values using several insert in SQL option

  Hi all

  I'm trying to insert the date in the table I created using the code mentioned below

  Insert into TRX

  ('& Trx_ID ', "& amount',' & account_no', ' & dot");

  Enter the field value: 1

  Enter the value of the quantity: 2000

  Enter the value of account_no: 1001

  Enter the value corresponding to point: February 10, 13

  After you enter the data, I get the error,

  2 old: ('& Trx_ID ', "& amount',' & account_no', ' & dot")

  2 new: ('1 ', '2000', ' 1001', February 10, 13')

  ('1 ', '2000', ' 1001', February 10, 13')

  *

  ERROR on line 2:

  ORA-00928: lack of SELECT keyword

  Kindly help me to find the error in my code.

  Thank you...

  put a key word VALUES before your brackets

  Insert... values)

  HTH

• Cannot change the value in the report url column in the select statement. Help, please

  Hi all
  I'm moving the value of the column of the report as follows:

  select key, num,
  case when Attachmentcnt(KEY) != 0 then
  'f?p=&APP_ID.:91:&SESSION.:'' '':NO::P91_KEY,P91NUM,P91_PREVPG:'

  And I'm passing the values as follows:
  
  {noformat}
  "#KEY #, ' NUM # #', 9' ELSE null.
  Fixing of END
  from tableA
  {noformat}
  
  But I'm not able to understand correct syntax for these column values. Can someone give me help. I appreciate it.
  Rgds,
  Suma.
  
  Published by: sumak on June 23, 2009 12:11
  
  Published by: sumak on June 23, 2009 12:22

  Suma,

  If you try to generate a column with a URL, try something like the following:

  Select the key, num,
  -case when Attachmentcnt (KEY). = 0 then
  ' f ? p = & APP_ID.: 91: & SESSION. : "": NO::P91_KEY, P91NUM, P91_PREVPG:'
  || tableA.key | ',' || tableA.num | ',' || : P91_PREVPG
  Another null
  end
  FROM tableA;

  But the best way to spend these would include values of checksum against the values of your parameters (to ensure that a user is not hack them). You will need to check the manual of the Apex for more details - see "Understanding Session State Protection".

  Good luck

  Stew

• How to change the value of a field?

  Hello
  
  I am a beginner in the report and I try to change the format of a field trigger value
  by the PL/SQL code editor
  
  is this possible? How can I identify my field (: MONCHAMP: does not work = newvalue)
  
  @rosagio

  Hello

  You cannot change the value of a column, but the field display values. Do it with the built-in SRW. SET_FIELD...
  Take a look at http://www.oracle.com/webapps/online-help/reports/10.1.2?navId=3&navSetId=_&vtTopicFile=htmlhelp_rwbuild_hs/rwrefex/plsql/builtins/examps/srw_examples.htm
  It is built-ins different depending on the data type. The object_id is 0 every time for the current object.

  concerning
  Rainer

• How to change the value of "DenyOnNotProtected" in OAM 11 g

  Hello
  
  I just wanted to know how we can change the value of the parameter 'DenyOnNotProtected' in OAM 11 g. In literature, it is mentioned that we cannot change the value. When I tried the console, I'm not able to. Is there another way to do this?
  
  Thank you
  
  Srikanth

  Hi Srikanth,

  I suppose that for some reason any OAM is not recognizing that this resource is not protected (or rather, protected by the anonymous system) - maybe some dissonance between the host setting preferred in the definition of Agent of the WebGate and the host identifier used in the policy.

  In addition, just to check: you use version OAM 11.1.1.5 or 11.1.2 (server)?

  Kind regards
  Colin

• Edit/view (data or Table column) value - cannot change the data, but it can be updated

  Hello
  
  According to the help of Oracle SQL Developer Center, the dialog ' Change/see value (data or Table column)' should "change the value of data" if we "are allowed to change the data." We strive to use this dialog box to modify/update data without having to write an Update statement, but is not to leave us. Us are not allowed to update the data, we can update via update statements. Even as the owner of the schema.table, it don't will change us the value in the dialog box "Edit/see value (data or Table column).
  
  Any ideas?
  
  We are on SQL Developer Version 3.0.0.4 build HAND - 04.34 and Oracle 11 GR 1 material (11.1.0.7) database.
  
  Thank you
  
  Alex Larzabal.

  You can still vote on the existing demand for this developer SQL to add Exchange of weight for implementation as soon as possible:
  https://Apex.Oracle.com/pls/Apex/f?p=43135:7:3974986722753169:no:RP, 7:P7_ID:4902

  Kind regards
  K.

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• Cannot change the search values

  Hi friends,
  I'm trying to restrict the values of "Extensible" search lookup_type "CONTACT". But I'm not able to disable certain options. Someone will suggest how it can be done. Not only by disabling but I also plan to add the values of tag for them.
  
  Advice or suggestions will be useful
  
  Thanks in advance

  Hello

  We had the same kind of requirement, ideally the system does allow you to disable or end date of the standard values in the CONTACT search. Please follow the steps below to run:

  1. go to the application-> research-> Common developer
  2. the query 'CONTACT '.
  3. click on the level of access 'user' several times
  4. navigate to help-> Diagnostics-> review-> field = CUSTOMIZATION_LEVEL
  5. change the value in "U".
  6 save
  7 re - question research CONTACT
  8 disable the codes you want to disable, and save.

  The only risk you have here is that in the case of a major update HRMS if oracle starts with her do replace your changes and you need to repeat the same thing. It will be useful.

  Thank you
  Sanjay

• Cannot change the type of data in the columns referenced by foreign keys

  Hello:
  
  I'm using Version 3.1.0.691 and change the types of data in many columns of data derived from the field types. If a column is referenced by a foreign key, however, the data type radio buttons are grayed out. I suppose that if I deleted the foreign key, that I would be able to change the data type of the column to a field, but that would be tedious. Is there another way to go about this?
  
  Any help would be greatly appreciated.
  
  Thank you
  
  Doc

  Hi Doc,

  If a column is referenced by a foreign key, however, the data type radio buttons are grayed out.

  It is not good - if you have the PK column, and it is called by another FK column you can change the data type of column PK and FK column data type will follow the change. You cannot manually change the data type of column FK. Good column PK itself could relate to another column, and in this case you cannot change the data type of column PK.
  In your case - you need to find the first PK/Uk column that is not the column FK itself and change its data type. FK columns in the chain will follow.

  Philippe

• Cannot change the date or time.

  I go to control panel or click on the time in the lower right corner, and then click change date/time.  I then click on the month (September) and scroll down to July and click on apply.  It remains July for a split second, then changes again in September.  It's the same for the day, month, and time.  Help!

  Hello

  · Were there any changes made on the computer before the show?

  · What is the edition of windows that is installed on the computer?

  · Who is the service pack installed?

  1. you can follow the steps from the link below: you can not set the date, time, or time zone on your computer: http://support.microsoft.com/kb/300022

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Up-to-date values of VM CPU/Memory in the GUI framework for ASD action

  I have a worfklow vRO work custom as an action of ASD resource that allows the user to resize their VM provisioned based on a variety of preconfigured sizes, choice of the user as part of the DSA application form. It is to replace the built in option to reconfigure so that users cannot select the random sizes for their virtual machines, all the items in the catalogue are configured with thus predefined sizes.

  The end result is that everything that the user selects meets a set of CPU and RAM for example values small = 2vCPU 2 GB RAM and these values are then used to change the vCPU and RAM on the underlying vCenter VM values, before the entity VM vCAC for CPU properties. County and Memory.Size are updated by using the line System.getModule ("com.vmware.library.vcac") .addUpdatePropertyFromVirtualMachineEntity (host, virtualMachineEntity, "VirtualMachine.CPU.Count", cpuCount, propertyIsHidden, propertyIsRuntime, propertyIsEncrypted, doNotUpdate); for example, the CPU.

  It works very well, the virtual machine is reconfigured in vCenter and the CPU. County and Memory.Size values are updated on the virtual computer in the vRA, but when you look at the virtual machine in respect of points it's CPU and RAM boxes still display the old values. These are updated to reflect the new values when the inventory in vRA jobs then run but cela could be up to an hour later in my system.

  I was wondering that if there is a way to update these GUI elements in my work, I see three possibilities:

  1. Add a collection workflow data force at the end (would be allowed, but I work in a small environment, but do not think that this would put across large environments)
  2. Rework my work flow so that it uses the option reconfigures integrated to resize the virtual machine based on the value of some users (this would probably work, but I would have to rewrite most of my workflow and test again)
  3. I missed a property or an attribute, a place that controls the values displayed in the user interface and these only need to be included in the workflow

  Anyone who provides a custom action to do something that affects the values displayed in the GUI, if yes, how do you currently part update or someone at - he of the alternatives that might require less effort to implement?

  It is on the vRA 6.2.1 with external device vRO 6.0.1 screenshots showing the situation running...

  

  > Add a workflow of data force collection at the end (would be allowed, but I work in a small environment, but do not think that this would put across large environments)

  Good or bad... That's what we do at the end of our CPU, Mem, and storage increase the flow of work.  We have yet to meet a problem.  It will be proportionally to the size of your environment in a way... but in reality, it would be more relative to the amount of change requests.  (less likely in the applications of appropriate sizes)

  > Rework my work flow so that it uses the option reconfigures integrated to resize the virtual machine based on the value of some users (this would probably work, but I would have to rewrite most of my workflow and test again)

  I don't like this idea... even if it is the method that I use for a change in ownership.  (search for ID users, collect the request and bind values machine, run request a resource workflow Action) You can give the vRO/vRA plugin service account permission to reconfigure in your environment. (I don't remember our initial plan in particular configurations... but currently in our environment reconfigures I cannot change CPU/MEM/storage).

  > I missed a property or an attribute, a place that controls the values displayed in the user interface and these only need to be included in the workflow

  Well, if find you... I really hope that you share.