cannot change the process unique network released (cleared)

Similar Questions

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.

• Cannot change the name of the file in the file properties.

  Original title: Cannot change the file properties

  Some downloaded files have a value in the box "title" under the details (after clicking Properties)
  I can't remove this 'title' and it appears so when I share the file on my network.
  The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

  I already have
  -taking possession of the object
  -allows full control for all users
  -tried to use the "attrib - r + s' function
  -among other...

  I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

  Any help at all would be great, if no additional information is needed let me know.
  Thank you

  This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

  abcAVI Tag Editor
  http://abcAVI.kibi.ru/

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Need ip vm info to change the type of network adapter

  Hello

  I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?

  Thank you

  Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false

  PowerGui FAQ.

  Q: how to start the administration Console in 32-bit mode on a 64 bit system?

  When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console.  This option will open the default version of the administration Console.  The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers.  Actually, on computers 32 bit, there is only one version, 32-bit version.  The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks.  To do this, you have a few options:

  1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.

  2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }

  3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"

  Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode.  Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.