Cannot change the incoming mail server. no text highlight

Similar Questions

• Mailing address: change the incoming mail server

  My servers have changed and I need to add new servers to my Mail application, but I can't change the incoming mail server: the text in the incoming mail server field is light gray and I can't choose or change. I changed the outgoing mail server and I can now send emails, but reception does not work. The incoming mail server is online and it is the same as the outgoing e-mail server.

  Can someone help me and tell how to change the incoming mail server?

  Ok. I found help in this thread: cannot not change the incoming mail server

• Change the incoming mail server?

  My company uses a hosted e-mail service, and I've not found a way to change the incoming mail server, if I can use SSL (criticism for unreliable wifi!).  The SSL certificate raises an error to me every time, and I am sure because "mail.domain.com" eventually returned a real certificate for the actual host name.

  I managed to change the outgoing server, but if it is not possible to change the incoming server, it is a major part of Palm oversight and should be corrected immediately.  This phone cannot be taken seriously for a user in a company without it.

  Someone at - it information that I'm missing?

  Thank you

  Try this.

  1 delete the account if you already have it in place
  2. click on add account
  3. in the box enter your address and email password screen select the menu (top left corner)
  4. click on manual set up
  5. change of pop to EAS
  6. 3rd field down is incoming mail server

• You cannot change the E-mail address associated with Apple ID

  I followed all the instructions to change the e-mail address associated with my Apple ID, including the signature of all THE browsers and devices that have previously been signed to my Apple accounts (icloud, itunes, etc.).  I also deleted my ID apple from my iPhone / iPad. The Apple ID page 'manage' I select "edit", "Change my e-mail address", and then I type in my new address, select 'continue' and screen dial just keeps turning and gets stuck.  I tried to use a new address "icloud.com", but that did not work.  Then I tried to use a new address "outlook.com", and that did not work; the dial at the same screen keeps turning but going nowhere.  Very frustrating.  Anyone have any idea why this is happening?

  I'm not sure what you are trying to do but you can not change the address to iCloud and you are never offered any opportunity to do so.

• I have problem for mail server Microsoft outlook.my is pop3 & smtp__outlook could not connect to the incoming mail server outgoing also mail server.server is not supported SSl _

  Task ' pop3.utoc.com.sg - receiving ' reported an error (0x8004210A): ' the operation has timed out waiting for a response from the receiving (POP) server. If you continue to receive this message, contact your server administrator or the ISP (ISP). »

  I just searched your error on support.microsoft.com code and the following article shows the information about the error you encounter: http://support.microsoft.com/default.aspx/kb/827349

  May be able to provide a little more help.

  Kind regards
  Max

• How can I change the outgoing mail server

  There is no account setting in the tools. How do the name of the server to change?

  The Tools menu which means documentation is on the menu bar which is hidden these days. Press the alt key to make the call of menu bar.

  When you use the new menus under the AppMenu account settings button located under Options.

• You cannot change the e-mail address of the printer

  I have just purchaesd a HP Officejet 6700, I have connected the printer to the web via a wireless network and received the automatically generated e-mail address that I'd like to change it to something easier to remember.

  I created an account with the printcenter E, but when I log in there is nothing on the home screen showing me what follows must be displayed according to your article news App that says "Click on the" Edit"button beside where your existing ePrint address appears, and follow the prompts to complete the process"

  The button Edit is not in sight.  I tried to connect using AOL & Internet Explorer (64-bit), but the result is the same.

  If I try to re - register the website tells me that my email address is already registered, which suggests that I registered successfully, as I received emails from HP saying congraulations on registration to connected HP.

  HI Bigead,

  I would contact Hp Cloud Service Department at that time to see what is happening with your account.

  The number is 1-855-785-2777.

  Let me know how it goes.

• Domain users cannot change the password with Server 2003 SP1

  Hello community,

  I use a Server 2003 SP1 as a domain controller.  Now we have implemented group policy which is the default value

  now some users when you are prompted to spend there the password are able to go through the process of implementation of their old password and change to new password but are constantly pushed to repeat the same process.  I don't have any screenshots as of this point of the error, simply users who suffer.  Any information is appreciated.

  Hello

  I suggest to send your query in the TechNet forums and would be better suited for the IT Pro TechNet public.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• The field "Incoming mail server" cannot be empty.

  It all started with Notes in Mail, do not sync with Notes on iCloud more.

  So I tried to delete the iCloud account in Mail and add more later. I did it in Mail and in system preferences.

  But now, when I try to change some preferences and save them, it gives me the following error: "the field"Incoming mail server"cannot be empty." The field is well informed, and it is greyed out, so I can't change it.

  How can I fix? I've tried signing to iCloud and restart my MacBook etc.

  See you soon,.

  Thomas

  I just found the answer myself. I clicked on the Inbox folder, secondary went to 'Read the account information' and changed the behavior of the mailbox there.

• How to change the smtp Protocol. element of the outgoing mail server

  When adding to an existing e-mail account, it is not possible to change the part "smtp." from the address of the outgoing mail server.
  My smtp server name is "mailout.easymail.ca".
  How can I configure this?

  The wizard does not any part of the server names. I think you're confusing a label that simply States the type of server with the actual server name text entry (or more accurately, the address).

  A couple of my accounts using a format of "mail.example.com" and he had no difficulty at all by entering in these.

• "All of a sudden cannot receive incoming mail - server response: '-ERR re of authentication failure.

  When I try to get incoming mail all of a sudden, I get a message that says "account: 'pop.gwi.net', server: 'pop.gwi.net', Protocol: POP3, server response: '-ERR reauthentication failure ', Port: 110, secure (SSL)": no, Server error: 0x800CCC90, error number: 0x800CCC92 ' "

  Which is based by a command prompt to verify my user name and password.  This email account has been implemented if a long time that I can remember is no longer my password.

  When I try to get incoming mail all of a sudden, I get a message that says "account: 'pop.gwi.net', server: 'pop.gwi.net', Protocol: POP3, server response: '-ERR reauthentication failure ', Port: 110, secure (SSL)": no, Server error: 0x800CCC90, error number: 0x800CCC92 ' "

  Which is based by a command prompt to verify my user name and password.  This email account has been implemented if a long time that I can remember is no longer my password.

  "Part of your error message: server response: '-ERR re of authentication failure.
  Try this. Assuming you use Windows Mail or Windows Live Mail. If you aren't the case, ignore this response.

  Open Windows Mail or Windows Live Mail > tools > accounts > select your account of gwi > properties > servers.
  Under incoming mail server,.
  If you have a " logon using clear text authentication " option,click it > click OK
  If you do not, leave which are VIRGINS he. Do NOT check the "connect using secure password authentication"

  Go to the Advanced tab > put check on BOTH "this server requires a secure connection (SSL)" > OK

  t-4-2

• How can I change my outgoing mail server but keep the same email to send?

  Hi team,

  I have a new job and a new e-mail address of work, I now work for a charity in Australia, so I have an [email protected] address to my email.  Its all good while I'm at work, but the technology that put in place said when I'm at home, I need to use my own mail server outgoing (its optusnet so I'm at work).  So my question is how to keep my [email protected] outgoing e-mail address?

  When I try to send an email, I get the window that says optusnet... will not send the email and I can choose my other outgoing servers (iCloud or gmail) in a list, but when I change to one of these options automatically change the e-mail address sending the e-mail.

  As I said I work for a charity and the nature of some of my emails and requests, it is important that sending email looks official so it's kinda a problem unless I am limited to only send emails during work hours while I'm physically at work - which is not really going to do it for me.

  Any help or advice would be greatly appreciated.

  Have a nice day

  void

  You can access your work e-mail account via a web interface (browser)? If so, you can use it as who would use your work email of course.

  I don't know any other way at home, it's your ISP servers that carry your email and they don't recognize another provider.

• Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Hello

  The following link will guide you on how to change your email address associated with your Adobe ID

  Change the e-mail address associated with Adobe ID.

  Please follow the steps and let us know how it goes.

  Concerning

  Sukrit diallo

• In Illustrator, I've created a text box and cannot change the font color of black.

  In Illustrator, I've created a text box and cannot change the font color of black. I tried changing each CMYK percentage individually, but it stays black. I have not had this before. What is going on?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  akayshay,

  If I (put) understand, you can simply create a region Type, and then select with the normal (black) selection tool, then set the fill color to none in the Toolbox, and then click Add a new fill in the appearance palette and with the selected fill (yet) set your colour (ing) desired.

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you