Cannot complete my order as a student

Similar Questions

• Cannot complete the order of flow due to a disk error.  any ideas?

  Cannot complete the order of flow due to a disk error.  any ideas?

  Well, I got up to reinstall Photoshop but that did the trick.  Thanks for your help. I took your advice, but nothing has been appearing in the console application.  But all is well now

  Lester

• Cannot complete the order after the iPhone booking 7 during the pre-order?

  Not sure if this is the appropriate place to ask... but did anyone encounter this problem with their iPhone 7 pre-order?

  After that I tried to place an order for the iPhone 7 more during the pre-order, I received an email from the Apple Store saying that my iPhone had been reserved and provided me with a reservation number. They said that they send an email when they were able to reach the carrier systems so I could place my order. Very quickly after I got a follow-up email confirming the booking number and was told that I could now go ahead and place my order. I have connected to the Apple Store, who acknowledged my reservation number, almost all of the screens orders went through, but when I hit continue to confirm the pricing plan that I had selected, the next screen shows the page of 'the page you are looking for is not found' dreaded.

  E-mail with the reservation told me that I don't have that until 4 PM PDT 9/10 to complete this order. Everyone knows this! I tried through the app store of Apple, Safari, and Chrome... and always get the same question. I've been on hold with Apple now for 45 minutes trying to get through, and they don't take chat requests. I'm so frustrated! Help!

  The site is probably hammered with requests for pre-order. I'll try again later if I were you.

• "Cannot complete order because the extension could not be loaded." with the sample CEP5

  Hello

  I have trouble with my extension porting to CEP5. I get the error message "Cannot finish order because the extension could not be loaded." when I open the Panel.

  Is it possible to get more information about what happened and why? My post was properly signed zxp and managed Extension installed without problem.

  Also, to debug the problem, I tried to open the Test HTML CEP Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0

  I copied on '~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST ", created .debug inside (https://gist.github.com/m6k/39a49786b7a85a9e312b), empty the file inside Photoshop CC 2014.app .debug (to remove the verification of the signature). When I open Photoshop CC 2014, I see test listed in menu extension panels, but when I try to open them, I also get the error "cannot complete order because the extension could not be loaded.".

  
  

  No reference to what I'm doing wrong and what I can do to debug this problem?

  
  

  Jan
  

  Please read this: Adobe Extension Builder and Creative Cloud 2014

• cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

  Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

  Hello

   
  • What operating system is installed on the computer?
  • Have you tried with another name?
  Go to network and sharing settings and check the name of the previously defined network.
   
  Try the following steps to do the same thing:
  a. right click on the Network icon located on the bar spots.
  b. click on open network and sharing Center.
  c. under view your information network base and installation connections check information (network name).
  d. try another name in order to set up a network.
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
   
  http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
   
  I hope this helps!
   

• Install icloud for windows cannot complete 10

  The package install to icloud for windows 10 cannot complete.  Is an update on the way?

  The latest Version is the 6.0 and most likely a new Version does not solve your problem.

  It would be nice if you could provide the full error message-> if this is a Windows Installer Package error please check if you could install all Windows updates.

• Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

  Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

  Try this:

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• Cannot complete logoff Hotmail without deleting cookies & cache, what has changed?

  Cannot complete the logoff Hotmail recently without deleting cookies & cache, what has changed? I don't intend to do that each time only.

  Hello Vince_71,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Microsoft Fix it's error: "we're sorry, but we met an unexpected problem and cannot complete this diagnostic solution."

  When I try to run Microsoft Fix it automated troubleshooting services, I get - "we're sorry, but we met an unexpected problem and cannot complete this diagnostic solution." I ran before with great success, but it did work for awhile now. I can't understand how uninstall/reinstall, or how to solve why it does not work for me any more. I run Vista Home Premium. This problem has happened to others?

  original title: Microsoft Fix it does not work

  Hello

  Are your logged as administrator?

  What I wanted was otherwise, what issues are having you? Why do you need to run a Fixit? This could
  It does not lead to why the FixIt.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  I would also like to launch SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------
  Perhaps an installation problem.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442