Cannot connect edimax wifi extender to the uverse router

Similar Questions

• Cannot connect Windows XP computer to the wireless router

  Original title: why did I have to disable my ethernet on my front XP computers connections all of a sudden they would connect to my wireless network

  I installed a new AT & T wireless router

  Only my Windows 7 laptop would connect to the new wireless router.

  For my XP desktop and the laptop I had to disable the ethernet connections [although no cable not connected] so that the wireless to connect.

  I did it on a whim after days of not being able to connect and many calls to support AT & T.

  Both computers have shown the presence of the network, had 4 or 5 bars and had the right key WAP.

  So what did this happen?  XP update?  Wireless driver update?  The AT & T router?

  I had the problem until I'm the new router, AT & T AT & T could find nothing wrong with the old.

  Their "solution" was to send a new router - Netgear v the Westell, I had for days of Bellsouth.

  Hello

  
  Have you tried to proceed as stated in my previous post?
  If you want to continue to launch other steps, you try to temporarily disable the firewall and check. Check out the following link.
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Note: on disabling firewalls, viruses, or malware can get into the system. After you complete this step of troubleshooting, turn on the firewall.
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then, the firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  Post back with the results.

• Aspire E 15 cannot connect to wifi

  My laptop suddenly cannot connect to WiFi (error "Unable to connect to this network").  I run the Acer care center, and it says that my system is up to date (including drivers).  I used the health check to identify the problem, but "Troubleshooting couldn't identify the problem.

  The wireless network card is Qualcomm Aheros QCA9377. I went to http://www.acer.com/ac/en/US/content/drivers and there are 3 Atheros drivers listed.  I don't know if I should install a new driver and install since there are 3 of your choice.

  Please advice.  Thank you.

  I solved the problem by installing the driver Wireless LAN Driver (NFA435) (ver. 12.0.0.102), available at http://www.acer.com/ac/en/US/content/drivers#_ga=1.265780556.217261961.1453001145.

• I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change

  I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '.

  frustrating

  If you are referring to a Windows Live account, you can get help here: http://www.windowslivehelp.com

• 5s iPhone cannot connect to wifi and not this update to the latest version of the software

  MY iPhone will not connect to wifi and it's also not giv me updat options.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Equium M50 cannot connect to Wifi b

  Hi, my M50 cannot connect to my wireless b router, it can connect to my network of friends g. The router has been tested with other laptop & works very well. Also can't update driver Wifi support page.
  Andy

  Hello

  Have you seen no yellow exclamations points in Device Manager in the section of wireless LAN card?
  Have you activated the card wireless switch on the side of the laptop and with the FN + F8 key combination?
  Please check these options.

  Good bye

• E5 - 571 cannot connect to wifi at all

  I bought the Aspire E5-571 yesterday and I tried to connect to wifi with no luck what so ever. It is running windows 8.1 x64bit. I've updated the network adapter atheros a.285 provided on the acer driver downloads section. but still no luck. WiFi connections are displayed but I can't communicate with them, I have infinity of bt using the bt hub 4. I go as far as to type in the access code for the router but says that it cannot connect. my other devices can connect (iPhone, portable under win7). the only way to connect is to sit on my staircase using an ethernet cable. Thanks in advance for the help.

  I found a solution!

  running all the updates and not having anything work, made me think of getting a new network card. It is clear to see that the problem lies in the qualcomm atheros so after watching youtube videos, I thought that it would be difficult for everyone to open their laptop and reinstall the network adapter. siimply so quite, I use a plug usb adapter you can get on amazon/ebay/or a store with an it Department for a simple tenner. Although this has not resolved the problem with the qualcomm's atheros card, I am able to connect to wifi, so I am very happy. Thanks for the reply.

• Acer One S1002 cannot connect to Wifi

  I just bought a S1002 an Acer (windows 8.1) last night and connected to the wifi at home. No problem. I get out and continue to downtown, then select wifi that I want to connect, and the State of WiFi sticks on "Checking network requirements" before saying that he cannot connect to the network. I don't not even at the point of application is the password for the network before the connection fails.

  I can't call the @# $& * (% ^ @# & * (% ^ * (! & $^ Acer customer support because they print the) @* (#& % ^ @# & * $% series information both @# $* (& % ^ @# $* (& % ^ small.)))))

  I tried Windows help pages, and they say that it is the router, and I need to solve a problem with the router. My iPhone and iPad 2 Nextbook can all connect both at home and at work WITHOUT a PROBLEM.

  Anyone have any ideas on how to fix the Acer One wifi to connect?

  vampiresharker wrote: I can't call the @# $& * (% ^ @# & * (% ^ * (! & $^ Acer customer support because they print the) @* (#& % ^ @# & * $% series information both @# $* (& % ^ @# $* (& % ^ small.)))))

  Anyone have any ideas on how to fix the Acer One wifi to connect?

  I use my phone to take a picture, then blow up the images to read the tiny letters usually.

  I guess you have already forced the tablet to forget the network, rebooted and then retried connecting? It is sometimes difficult to get them to really forget a wrong entered password.

• installed Firefox depending on the instructions on the screen, but cannot connect. Have now added the new user name. How to complete the installation?

  I can't connect or open Firefox. Uploaded by on screen instructions but still cannot connect or use firefox.

  Installation of Firefox is not dependent on the signing in. You don't need a username / password for Firefox.

  Please explain what works and what's not more in detail.

• Somes devices cannot connect to WiFi TimeCapsule more

  Hi everyone, I am facing a weird situation.

  Current configuration: the home Wifi is provided by a TimeCapsule, which has its firmware updated. A couple of device (10) are regularly connected (printers, iMac, MacBook Air, iPhone, iPad, iPod, etc.). Nothing very complicated.

  The situation:

  This morning, I had 2 friends at home with their personal devices (one tablet of Nexus and an iPad 1st generation). I tried to connect to my Wifi and it never worked. On the iPad, the wheel turned in the parameter space WiFi and no internet connection was possible. No Wifi setting has been provided by the TimeCapsule (no IP, etc.). On the tablet of the Nexus, I got more details: he was blocked at the stage of IP address get.

  Obviously, my first thought was to restart my TimeCapsule. Unfortunately, nothing has changed: these new devices have been blocked at the same stage and... my daughter iPod also got stuck. Exactly like the iPod from my friend. But has been connecting iPod to my daughter to my wife for the last 3 years!

  My friends finally left, so the problem is "over", with the exception of the iPod of my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  On the TimeCapsule, I see that the iPod gets an IP address. Also, when I change the name of the iPod in the control area, I can launch a sync to iTunes on the iMac and the iPod name is updated! So, this means that the iPod IS connected via Wifi, but it is not possible to browse the Internet or connect to what. The WiFi icon does not even appear in the top bar.

  All other devices (iPad, iMac, etc) works perfectly.

  Any ideas?

  M.

  ... except for the iPod from my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  As you probably already know, reset the network settings deletes saved passwords and network configuration details. It also exports the residual caches and preferences. Most of the time, it should be fixed.

  As it didn't, the only other suggestions I could give are:

  • Go to the option "forget network Wi - Fi" in iOS settings and then manually try to join the wireless network yet.
  • If this does not resolve the problem, then possibly one or more of your Wi - Fi connection settings for your wireless network may have to be changed:
    • Make sure that the network name does not include spaces or special characters.
    • Don't 'hide' your Wi - Fi network.
    • Try temporarily disabling Wi - Fi security to see if the iPad will connect now.

• HP Slimline 410-010 desktop: driver for my wireless card, cannot connect to WiFi

  I just reinstalled WIndows 7 Professional. I find all the drivers except for the wireless adapter, I can not connect WiFi, here is the card number. I searched and could not find the driver. Thanks for any help.  PCI\VEN_10EC & DEV_8179 & SUBSYS_804B103C & REV_01

  Hello:

  You need this driver...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp72932.exe

• Why suddenly 6s connection to wifi iphone falls the router

  Whenever I turn on my wifi to my phone6S it drops my router and I can't use any other device. When wifi is off on my phone I have two computers laptops, ipad, watch netflix on TV it's just the phone that kills the wifi? I have to stop everything and then I can use the wifi on my phone, but then I have to turn off if I want to use something else?

  My phone connected to wifi last week, and then I lost all the settings of the router had to come in and redo everything. I don't know why all of a sudden his misuse of my wifi, nothing has changed. I have an ipad 2 laptops, a roku and 2 blu ray readers any connection to wifi and can use them without problem?

  Seems that others have similar problems maybe?

  Any help would be great

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• Cannot remove an xbox360 Extender. The status of the Extender shows as visible, but not mount.

  I'm using windows 7, 64-bit computer. I could connect the extender to the xbox, the first time I tried. Then I unplugged the Extender to try to connect to another computer. Now when I come back in WMC, it is picking up the xbox 360 extender, but it seems to be looking for the old 8-digit code. Any time I try to put in the new code, I get the configuration error. There is also no option to remove the extender for the xbox that WMC is recovering. I tried to remove the certificate that is generated. A new certificate is generated every time that I put in the 8 digit code, but still not login... McAfee Firewall is also disabled. Also tried turning off WMC and on again. What Miss me?

  Hi Christophe,

  The question you have posted is related to the Xbox 360 Extender and would be better suited to the Xboxt community. Please visit the link below to find a community that will provide the best support.

  http://forums.Xbox.com/

• cannot connect to wifi

  having problems connecting to wifi, it is time out or can't find a connection.

  I have a Pixma MX472 printer bought in April 2014, I use a Macbook Air and AT & T Uverse. I moved in May and were not able to connect to my new WIFI. It expires whenever I try to connect. I had a few pros visit tech and they have no success.

• Cannot connect administrator account. Error - the Group Policy Client service has no logon. Access is denied

  Original title - MESSAGE of ERROR

  Hello

  I am runnung Windows Vista on my laptop Toshiba A200. As of a few days ago, asking that I try to open a session (I'm the admin), I get an error message saying "the Group Policy Client service does not log. Access is denied. »

  I managed to get in the "back door" through my wife and did a system full scan with Norton and Spybot and neither found anything unusual. He asked me to change my user account settings, but of course, because my wife is not the admin, he won't let my do changes.

  In addition, some of my software, such as Final draft, also seem to have vaporized.

  Help!

  Thanks in advance,

  Steve Hayward

  Hi stevehayward

   

  1. is the computer on a domain?
  2. during how long have you had this problem?

   

  If the computer is not connected to the domain, you can start in safe mode, and then try to perform a system restore.
  Step 1 :
  In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:
  You can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.