Cannot connect to share on another server with a short name only

Similar Questions

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• How to connect to a Windows 2003 server with a domain from a Win7 pc

  How to connect to a Windows 2003 server with a domain from a Win7 pc

  Hello MikeYoungblood,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. All ideas

  Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. Any ideas?

  Not sure that you need a different directory.

  If you are working on a local computer, create a new site with all the same settings for local files and change the remote server settings to match the second server.

  This ensures you that there is no difference between the two websites.

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Windows cannot connect to the printer operation failed with error 0x0000007e

  Hello

  OS: Windows 7 x 86 SP1

  Print server: Windows Server 2003 R2 SP2 x 86

  Printer: HP LaserJet 8150 printer shared and listed in the directory

  Problem:

  When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).

  In the Print Service logs, I see the following:

  "The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.

  I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.

  I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.

  When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.

  How can I get Windows 7 clients to use the UPD?

  I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.

  I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?

• Cannot Connect to Host ESXi 4.1 with browser or Client VI

  Hi, I have a strange problem which has persisted since I first installed ESXi 4.1 on a server. First my setup:

  • ESXi Installable on a HP DL380 G6 server, 32 GB of RAM, 4xEmbedded NETWORK ports, Port NIC, 2 iSCSI x QLogic QLE4060C HBAs 1xDual adapter

  • HBAs configured for Jumbo and static IP frames but except that all the settings are default

  We have installed ESXi 4.1 with only the built-in port #1 connected to the switch. Everything went well and we were allocated the only active NIC (vmnic0) as the management interface. Once installation is complete, we were able to connect to the management interface using a browser and the VI client.

  We then connected NETWORK card and remaining HBA ports to the switch without loss of connectivity to the management interface. During our next restart we could no longer connect directly to the host using a browser or the VI client but could still ping the IP.

  We tried to restart the management agents, but it did not help.

  Here are the different startup scenarios, we tested and the results:

  Scenario #1 - Boot with built-in NICs, DP adapter cards, network and HBAs connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  Even if we try to unplug the adapter DP and HBA ports after starting we still cannot connect to the management using the Explorer or the VI Client interface. A reboot is required, and the script #2 or #3 must be followed.

  Scenario #2 - start with only the embedded and DP adapter NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  If disconnect us the two ports of adapter DP we can then connect to the host via the browser or the VI client without having to restart. We can reconnect them and we continue to have access to the host, and everything is fine.

  Scenario n ° 3 -Boot with only the NIC integrated, including the Mgmt NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = Yes

  Then we connected the DP adapter and the adapter port HBAS to the switch and all the connectivity was very good. This scenario is our solution for now.

  Other information

  The QLE6xxx ESXi module takes about 5 minutes to load during startup, when the HBAs are connected to the switch, but it loads successfully. Not sure if this is normal or not.

  Thank you in advance for your help!

  Paul

  This looks like a very unusual network for me configuration.

  Could you post a screenshot of virtual network configuration and add a few comments on the different configuration of the vSwitches and uplink connected.

  If I understand correctly that you have at least 3 vSwitches (management, virtual machines, and iSCSI), however, from what you wrote so far I do not completely understand how implement you.

  André

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• cannot access the files of another user with the admin account

  I'm on a computer with Windows Vista 64-bit home problems.
  I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
  Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.

  I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
  Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.

  I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.

  What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?

  What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?

  How can I use the powers of the administrator to access other files (regular) user?
  Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.

  I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
  I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• View 5.0 upgrade cannot connect through security on PCOIP server but RDP works very well

  We have improved the sight of 4.6 to 5 and we are no longer able to connect through pcoip via security server. When you connect remotely if you select rdp everything works fine, but pcoip goes to a black screen and then return and error message of 'the connection to the remote computer is done '. Everything worked well in 4.6 before the upgrade and no settings have been changed. Any help would be greatly appreciated... Thank you

  Just had this problem, same solution, external IP had changed its internal IP DMZ, it switched back - totally fixed.

• Incompatibility of the thumbprint SSL in Remote Console on the new ESXI5.1 server with the same name as the old

  I use the vSphere Client Desktop for remote access to a VMware host if SSH tunneling. Basically, I aim at the customer 'localhost' and it is redirected via the SSH tunnel on the server at the other end.   I usually always could access the things just fine, but recently, I replaced the remote server with a new one.  Off the old, I changed my SSH tunnel to point to the new server.  The client is connected correctly, and I can see the virtual machine and work very well with the host country.  However, if I try to open a remote console, I get an error saying "failed to check SSL for 'mylocalmachinename.domain.com' due to incompatibility of fingerprint digital host: stored fingerprint '< checked again footprint esxi host >' does not imprint of cert" < imprint of mystery which does not correspond to a new host * or * former > ' I still find from this certificate thumprint!  I can get remote consoles on those virtual machines to machines that are the on the host, but not this remote workstation.  This * feels * like a sort of updated certificate cached somewhere, but I can't find of it empty.  I checked the registry and the thumbprint for the remote server is correct.  The part of remote console of the vsphere client there is thumprint own cache somewhere?

  MEH.  Response proved to be something completely independent and stupid.  There is a process running in my system that was also listening on port 443.  Why it intervened with the virtual console only and not the main customer I have no idea, but stopping did the trick.  It was another application I had installed some time ago and off it, I realized that I don't think that I actually * tried * run a console on the old vmware remote host because I installed this application.  It has probably been broken for a while now and I barely noticed.    So... Yes... too bad.

• Database test on a different server with the same name of SID as database production - thoughts?

  Hello

  We use oracle 11.2.0.3 and have 2 environments a production environment and test each on different servers.

  Currently, our test database has database different SID to the production one.

  DBA is eager to have the database of test with the same name of SID.

  Thoughts/concerns in this area - will be on different servers.

  Thank you

  We also had a similar situation, it allows to save a few hours when cloning (we do not use RMAN), but a lot of damage, it can create.

  So much better with different names on different servers.

  concerning

  Pravin

• How to recover site by any IIS server or Apache Tomcat connecting a laptop to another laptop with Wi - Fi (Adhoc network)?

  We have two laptop from different companies and different configurations. We run a site a laptop that uses Apache Tomcat. Now, we want to access this website from another Explorer computer laptop. How is that possible?

  Hi Tejas,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads