Cannot connect to the XP Recovery console

Similar Questions

• Cannot access the System Recovery Console invalid password

  System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations.  However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works.  I loaded 'ophcrack LiveCD' and found that the password is .  I tried to use no password and this also fails.

  What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console?

  Thank you.

  Hey Ron,.

  I finally got some time to focus on this and learned something that could explain the difficulties you encounter!

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this.

  Sorry it took me so long to find! I hope that answers your question!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to the user's profile, can't remember the password

  I bought my HP Pavilion laptop of series g, almost 2 years ago. It worked perfectly until 2 days ago. When I woke up yesterday and went to the opening of session of Windows 7, I get the following message "the service user profile the logon failures. User profile cannot be loaded. »

  What should I do?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Cannot connect to the domain when I want to open a session

  My virtual machine cannot connect to the domain, when I want to open a session and I forgot the administrator password.

  Windows password recovery CD does not work when I want to start.

  I can ping the VM to my machine.

  Is it possible to enter into the machine without the admin password.

  How can I see if the dns on esx works very well.

  Help, please.

  Here you asked two questions:

  1. How to recover password lost admin: the best way is to use windows recovery or just map the Vm cd to iso image of your OS drive. And making the VM to start from the CD and then installation steps use the OS repair option.

  I think that yes the time spent here will u be about even if you use the new virtual machine fresh construction.

  2. how to check the dns works well at esx: what exatcly you mean that... ? just try to ping the esx, try to connect to esx via the web console... and even if you can check network under esx etc folder settings to check the dns.

• Computer HP model # DV7-3162NR, cannot connect when the password is entered

  After typing the password is a statement saying, "can't logon user profile Service service". What can be done to correct and go to the line.

  Thank you

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• cannot connect to the HP laptop.

  cannot connect to the HP laptop. safe mode didn't work or system restore. have windows vista. This error:

  C:\WINDOWS\WinSxS
  \x86_microsoft. Windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_9e50b396ca17ae07\gdiplus.dll if the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support

  Hi mikiduki,

  I suggest you do the startup repair that may help you resolve the issue.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You can try to disconnect all external devices on the machine, and then start the computer.
  Sometimes, an external hardware can also cause the issue during the startup process.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• established - VPN connection, but cannot connect to the server?

  vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4

  Thank you

  ASA Version 8.2 (1)

  !

  hostname ciscoasa5505

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.0.3 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 208.0.0.162 255.255.255.248

  !

  interface Vlan5

  Shutdown

  prior to interface Vlan1

  nameif dmz

  security-level 50

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.0.4 server name

  Server name 208.0.0.11

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service TS-780-tcp - udp

  port-object eq 780

  object-group service Graphon tcp - udp

  port-object eq 491

  Allworx-2088 udp service object-group

  port-object eq 2088

  object-group service allworx-15000 udp

  15000 15511 object-port Beach

  object-group service udp allworx-2088

  port-object eq 2088

  object-group service allworx-5060 udp

  port-object eq sip

  object-group service allworx-8081 tcp

  EQ port 8081 object

  object-group service web-allworx tcp

  EQ object of port 8080

  allworx udp service object-group

  16001 16010 object-port Beach

  object-group service allworx-udp

  object-port range 16384-16393

  object-group service remote tcp - udp

  port-object eq 779

  object-group service billing1 tcp - udp

  EQ object of port 8080

  object-group service billing-1521 tcp - udp

  port-object eq 1521

  object-group service billing-6233 tcp - udp

  6233 6234 object-port Beach

  object-group service billing2-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-777-tcp - udp

  port-object eq 777

  netgroup group of objects

  network-object host 192.168.0.15

  network-object host 192.168.0.4

  object-group service allworx1 tcp - udp

  8080 description

  EQ object of port 8080

  allworx_15000 udp service object-group

  15000 15511 object-port Beach

  allworx_16384 udp service object-group

  object-port range 16384-16393

  DM_INLINE_UDP_1 udp service object-group

  purpose of group allworx_16384

  object-port range 16384 16403

  object-group service allworx-5061 udp

  range of object-port 5061 5062

  object-group service ananit tcp - udp

  port-object eq 880

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq https

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq www

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq www

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777

  outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000

  outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group

  outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0

  Ping list extended access permit icmp any any echo response

  inside_access_in of access allowed any ip an extended list

  permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0

  access-list 1 standard allow 192.168.0.0 255.255.255.0

  pager lines 24

  Enable logging

  logging buffered stored notifications

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool

  192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 1 192.168.0.0 255.255.255.0

  alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255

  public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255

  public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255

  static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1

  Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  http 192.168.0.3 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt noproxyarp inside

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_cryptomap

  card crypto outside_map 1 set pfs

  peer set card crypto outside_map 1 108.0.0.97

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 20 match address outside_20_cryptomap

  card crypto outside_map 20 set pfs

  peer set card crypto outside_map 20 69.0.0.54

  outside_map crypto 20 card value transform-set ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life no

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life no

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  identifying client DHCP-client interface dmz

  dhcpd outside auto_config

  !

  dhcpd address 192.168.0.20 - 192.168.0.50 inside

  dhcpd dns 192.168.0.4 208.0.0.11 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal group anyconnect strategy

  attributes of the strategy group anyconnect

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  SVC request enable

  encrypted olivia Zta1M8bCsJst9NAs password username

  username of graciela CdnZ0hm9o72q6Ddj encrypted password

  tunnel-group 69.0.0.54 type ipsec-l2l

  IPSec-attributes tunnel-group 69.0.0.54

  pre-shared-key *.

  tunnel-group 108.0.0.97 type ipsec-l2l

  IPSec-attributes tunnel-group 108.0.0.97

  pre-shared-key *.

  tunnel-group anyconnect type remote access

  tunnel-group anyconnect General attributes

  remote address pool

  strategy-group-by default anyconnect

  tunnel-group anyconnect webvpn-attributes

  Group-alias anyconnect enable

  !

  Global class-card class

  match default-inspection-traffic

  !

  !

  World-Policy policy-map

  Global category

  inspect the icmp

  !

  service-policy-international policy global

  : end

  ASDM location 208.0.0.164 255.255.255.255 inside

  ASDM location 192.168.0.15 255.255.255.255 inside

  ASDM location 192.168.50.0 255.255.255.0 inside

  ASDM location 192.168.1.0 255.255.255.0 inside

  don't allow no asdm history

  Right now your nat 0 (NAT exemption) follows the access list:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.

  Then try to add an entry to the list of access as:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0

  It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Cannot connect to the virtual store of Toshiba

  Nice day.

  I am from Slovakia. I bought online for my small son Tablet Toshiba Journe. We cannot connect to the virtual store of Toshiba. The worst thing is that I don't ever account of Toshiba's e-store. Unique number I found is the tablet in the user manual and PIN: GMH300087E10. Can you tell me please give access to the store online, but either way or help me to recover the virtual store. Son would be very happy.

  Thank you. Palo

  Hey. Write me a mail, I will send you instructions on the use of this tablet. Online store does not work me and once I have already reset the account.

  Roman

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Skype cannot connect with the latest version?

  Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

  So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.