Cannot access the System Recovery Console invalid password
System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations. However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works. I loaded 'ophcrack LiveCD' and found that the password is
What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console? Thank you. Hey Ron,. I finally got some time to focus on this and learned something that could explain the difficulties you encounter! http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this. Sorry it took me so long to find! I hope that answers your question! Cody C Tags: Windows Cannot access the system recovery partition I can't access the dell recovery partition, I tried many things like ctrl and f11, f12 and similar, but it won't let me in any ideas? Hi Cyber_Punk, Thanks for the reply. Please click on the link mentioned below to make sure that you try to run PC Restore correctly: NOTE: The PC Restore will remove the applications and data in the system. If the PC Restore does not work, you can perform the re-installation of windows by using the system shipped with the system disk operating system. Thank you & best regards Hi all For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode. I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD. I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus? Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same! Arianne Hello you talk about restore and system recovery disc in the same breath they are 2 different things and you can NOT create a restore of yesterday and today! yesterday is gone If it does not already; You can't do 1st thing to try is a restoration of the system in safe mode http://www.windowsvistauserguide.com/system_restore.htm Windows Vista Using the F8 method: If that does not read this information the link below is how to download and get a vista disk startup repair, which you can start from the http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/ Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below http://www.bleepingcomputer.com/tutorials/tutorial148.html to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu Change boot order it do dvd drive 1st in the boot order http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/ The malware removal: Download update and scan with the free version of malwarebytes anti-malware http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes http://www.bleepingcomputer.com/download/anti-virus/rkill If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking Windows Vista Using the F8 method:
Reinstall vista from Dell DVD Re: How to access the Windows Recovery Console? How can I access the Windows Recovery Console. The State of KBs Microsoft it may be accessessed to start with the DVD of the OS. However, you provide OS DVD only Toshiba recovery disks. When I boot them it gives only the option to erase all data and restore the original state. I have a Toshiba Qosmio F10 running Windows 7 32 bit. The reason why I need the recovery console is due to a breakdown of chkdsk which results now it running whenever I start up and hanging each time. Other Articals MS say I can get out of this infinite loop by using the Windows Recovery Console. > I have a Toshiba Qosmio F10 Windows 7 32 bit. Different on the MS recovery console administrator password When I was with the XP CD recovery console, he asked my password. When I typed in it, it is incorrect. However, once I typed in anything, it worked. I have a single installation of windows, so the first question, which is "what Setup do you access", had only one possibility, of course. Maybe it was a virus that has changed. But once I took action, the usual log on screen appeared, and my password worked. Is the recovery console suppose to do? Why? This is my 3rd time only having to use the console. most of them have been guided, anyway. I'm not familiar with the controls. Unfortunately, we do not know much about your system, so we have to endure a round of Q & A to provide the best advice. What is your Version of XP and the Service Pack? You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)? The XP Recovery Console "must" the XP administrator password, and the default XP administrator password is any password empty or empty, so if you just press the Enter key has the prompt for Password Recovery Console, which usually works. The RC will always ask you which installation you want to use - even if you have just a single installation (this is normal). Sometimes people may not enter the RC because they do not know, I forgot or never knew their administrator password... then they're stuck - but only temporarily. Sometimes the way XP has been installed (as in a store bought system) can thwart attempts to get past the Password Recovery Console. If it is your desire, you can configure XP simply do not ask for a password when starting in the Recovery Console. If you do a search on the Internet (Google, Bing, etc.) you can find a lot of articles on the use of the Recovery Console. Here are some links of Microsoft on RC orders: In the System Recovery Options administrator password? Hello dear users of Toshiba. I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password. I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him. Can someone please help? Y at - it factory default password? Thanks to you all! Hello To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it. Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option. To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue. So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option. Part removed from the registry, cannot open the .exe, .lnk and cannot access the system restore Following the advice on a Wikipedia page to remove a virus 'active security scan', I accidentally deleted a potion of my registry (software?) Now I can't access any .exe, .lnk, files etc. I get the message "windows cannot open this file", and then me accesses a page with no software suggested to open the file. I tried the system restore, but get the same message when I try to open the system restore program. Any suggestions? Jay, Mike - Engineer Support Microsoft Answers Cannot access the weblogic Server console. Hello In my windows server 2012 I created the virtual machine using the Hyper-V Manager. In this virtual machine, I installed the weblogic Server 10.3.6. The ip address of the virtual machine is 192.168.1.9. In my virtual machine using localhost I can able to access the console. But when I try to access the console to another computer that has windows 7, cannot able to access the console. Check if the AdminServer is listening on all addresses to link or not? Can you try to set an IP address to your AdminServer as following in your "$DOMAIN_HOME/config/config.xml", and then try again Still, if you face any problem, then it might be a firewall problem. Please, try the following on the remote computer to see if the port is accessible from the other box or not: From your windows 7 computer customer trying to see if this port is available or not on this IP address Also several times the IPv6 configuration can cause this problem, where can you try to start your WebLogic using the following JVM option: Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs? To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link: Cannot access the Oblivion cheat console, but I stopped the windows media center Receiver service. Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I should try next. ? Hi daking9002, To bring up the cheat console into oblivion, you will need to unplug the sensor remotely from the PC. Once it has been disconnected, the oblivion cheat console will come just as it would on any other PC. I also tried equipping my number 1 access key. It works very well now, I just press 1 and the console opens. To close simply press ESC twice and press 1 once the UN-equip the ring. You can also download: " http://www.tesnexus.com/downloads/file.php?id=13133 ." -It gives you an inventory item: "Ring of Console" problem solved. - QUESTMSG Cannot access the system restore When you try to use the system restore, it asks which file to open it with, which is something that he has not asked before. After that, he does not use the system restore. In addition, Firefox is the same way and I have to use Internet Explorer. Finally, the control panel behaves as if it does not exist. I don't know if they are related, but they started after my 'sealed' antivirus 'virus' that appeared while Adobe Reader has been updated... I'm completely lost as to what I should do. When you try to use the system restore, it asks which file to open it with, which is something that he has not asked before. After that, he does not use the system restore. In addition, Firefox is the same way and I have to use Internet Explorer. Finally, the control panel behaves as if it does not exist. I don't know if they are related, but they started after my 'sealed' antivirus 'virus' that appeared while Adobe Reader has been updated... I'm completely lost as to what I should do. First of all, if your anti-virus removed viruses/malware you don't want to use system restore. This is likely to give the malicious software on your computer. It sounds as if your file associations have been damaged. What makes no sense at all, it is that you are able to open Internet Explorer. Click on the link below. Download the file, save it to your desktop. Right-click on the file and choose merge. Confirm your choice to merge. http://www.Filemail.com/DL.aspx?ID=MGKJAIFFMFBHANI Click on the link below, download, update and perform a quick scan with Malwarebytes. Let me know the results of the analysis. Satellite C650 - cannot access the HDD recovery to restore Win7 Satellite C650 Windows partition has been destroyed, I have a copy of the recovery of HARD drive to an external drive, but using a disc of windows7 to start on windows does not recognize the recovery of hard drive as being any information system so will not restore the original windows and Toshiba Utilities. Press F8 and keeps O press the button of not raising the the menu with the option to restore. No clue as to how I can extract / use HARD drive recovery I Thank you Problem is this recovery saved disk image external DRIVE cannot be used. In s manuals document is clearly described that the owner of the laptop must create recovery media. This recovery media can be a DVD disc or USB key, depending on the model of laptop. What you can do now is to restore disc original order or to install the clean version of the OS with installation of Microsoft disk but it is also not the best solution. What do you think of all this? If you have any other questions you are welcome. Cannot access the system files with permissions to access EFS and certificate are set correctly. I am running EFS on a secondary internal hard drive on my computer Vista Enterprise SP1. I have been using EFS for a few months with no problems. Recently, when you try to access a number of files, I started getting access denied errors. I'm still under the same certificate with same file permissions that I was when I originally encrypted the files. Curiously, I can move, delete and rename files without problem, but I can not access, copy, or decrypt. I tried reseting the file permissions, nothing done. An excerpt from the command line: D:\>ICACLS FILE name. MOV NAME OF FILE. MOV
BUILTIN\Administrators: (I) (F) NT AUTHORITY\SYSTEM: (I) (F) NT AUTHORITY\Authenticated Users: (I) (M) Builtin\Users: (I) (RX) Processed 1 files successfully; Treatment failure 0 files D:\>cipher/y Thumbprint for computer certificates EFS ComputerName:
D:\>cipher/c FILENAME. MOV List D:\ New files added to this directory will not be encrypted. E FILE NAME. MOV Users who can decrypt:
Thumbprint of the certificate:
No recovery agent. Important information: Algorithm: AES Key length: 256 Entropy key: 256 D:\>cipher/d FILENAME. MOV Decryption of files in D:\ NAME OF FILE. MOV [ERR] NAME OF FILE. MOV: Access denied. 0 file (s) [or directorie (s)] in 1 directorie (s) have been deciphered. D:\ > The only thought I have is that maybe the metadata associated with the EFS file is damaged? I'm open to any new idea to access my files. Thank you in advance. Hi Dekaner, Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet Windows Vista security permissions and. Thank you! Lisa Vista - Windows 7 network connection. username and password is unknown. Hello I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know. If someone could answer this question, it would be great. Win7 when configured on the peer-to-peer network has three types of configurations of sharing. Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network. Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with. For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name. http://www.ezlan.NET/Win7/net_name.jpg Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions General example, http://www.ezlan.net/faq.html#trusted ------------------------------ If your network consists only of Win 7 and you want a simple network, use it. http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup After you have configured the homegroup, scroll to the bottom for the Permission/security section. ----------------------------- Win 7 networking with other version of Windows as a work network. In the center of the network, by clicking on the type of network opens the window to the right. Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs. http://www.ezlan.NET/Win7/net_type.jpg Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040 Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved. ------------- If you have authorization and security problems, check the following settings. Point to a folder that wants to share do right click and choose Properties. In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab. This screen shot is to Win 7, Vista menus are similar. http://www.ezlan.NET/Win7/permission-security.jpg The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly. When everything is OK, restart the network (router and computer). * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured. * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect. --------------------- *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked. Jack-MVP Windows Networking. WWW.EZLAN.NET Hello Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery Thanks for your response One of my email accounts usually get mail, but I can send emails I get this error message when I try to retrieve the messages.The RETR command has failed. Error when retrieving a message. Mail server pop - server.twcny.rr.com replied: no such message. I use Yosemite on MacBook Pro and last IOS on iPhone 5s 9.x, I made the video and photos with the iPhone but only photos have been migrated to my photo stream so Yosemite as these can see those. Do you have any suggestions? It is necessary to upgrade My printer prints a word (my documents) but prints photos of my images, My printer prints a word (my documents), but prints pictures of my images, black misuse. Printer copy black text. Moved from feedback Original title: impression of the printer error 53 system produces "net view \\computername. error 53 system produces "net view \\computername. Blue screen with the error "irql_not_less_or_equal" I have a problem I can not correct and hoped someone could help me fix. I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.Similar Questions
Mustapha S
#iworkfordell
Are you sure you have Qosmio F10?
http://support.Microsoft.com/kb/314058
http://support.Microsoft.com/kb/307654
My problem is that I can't use recovery tool if I don't log in as an administrator...
But first some basic information:
You should read through this article, because it addresses a similar situation. Let us know if it helps.
Recover corrupted regitry
Visit our Microsoft answers feedback Forum and let us know what you think.
telnet 192.168.1.9 7001
-Djava.net.preferIPv4Stack=true
HP computers - running a HP System Recovery (Windows 8)
HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Public share = network Public (as Internet Café) in order to reduce security risks.
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120Maybe you are looking for
