Cannot create a text block

Similar Questions

• Cannot create a text on this image in PSE10

  It has left me speechless.  There is something strange happens with this image.  I downloaded from the Web and cannot create a text on this topic - visible text.  The text layer is created (I can see it in the layers palette), but any font, size or color I use, the text does not appear on the image.  I have re-registered the PSE10 file, as another image of PhotoPaint X 5 (which can create text on the very good picture) nothing works.  Here is the image that was registered under another image in PP, but still does not work with the text tool in PSE10:

  

  It is not an important image, just one I use as a test case, but it drives me crazy.

  Ken

  AHA!  I thought about it.  I used the file... Open as open as a Camera RAW file.  In the editor of the cab, he showed in 16 bit depth.  Changed to 8-bit and saved.  The text tool now works!

  Ken

• Is it possible to create the text block with non-uniform formatting is applied to the text?

  Hi all

  By this script

  var doc = app.documents.add(70, 20, 300, "Test", NewDocumentMode.RGB);
  var textLayer = doc.artLayers.add();
  textLayer.name = "Text";
  textLayer.kind = LayerKind.TEXT;
  
  var solidColorRef = new SolidColor();
  solidColorRef.rgb.red = 0;
  solidColorRef.rgb.green = 174;
  solidColorRef.rgb.blue = 239;
  
  var ti = textLayer.textItem;
  with (ti) {
       contents = "Blah-blah-blah!";
       kind = TextType.PARAGRAPHTEXT;
       height = new UnitValue("20 mm");
       width = new UnitValue("70 mm");
       position = [ new UnitValue("0 mm"), new UnitValue("0 mm") ];
       font = "MinionPro-Bold";
       size = new UnitValue("24 pt");
       color = solidColorRef;
       justification = Justification.CENTER;
  }
  

  So I can create a block of text with uniform like formatting

  
  But, as far as I understand it, it is impossible to make an image and apply different sizes, colors, etc. (Please confirm or refute it).

  To achieve the result by script as follows:

  

  The r to Browse datashows the formatting only to the beginning of this text.

  
  What I want to achieve is to take a block of text in the InDesign document and re-create it in psd-file. (The text must be editable)

  Y at - it another way to achieve this: by plug-ins, extensions, incantation, etc.?

  Kind regards
  Kasyan

  So that other things I noticed, it's text.jsx does not work with UnitValues. It uses the action Manager to work with textRanges. And it seems that Adobe changed the textItem units operating. Therefore, it is difficult to understand what values to use. Text.addNewTextLayer () and Text.modifyTextLayer () seem to what different values for the text of the same size.

  So below is an example updated the PS-Scripts-post on how to create a text layer with different textRanges using the current text.jsx.Note I've hard-coded sizes for that to work as I had hoped.

  function tsrDemo(doc) {
       var doc = app.documents.add(new UnitValue(70,'mm'), new UnitValue(20,'mm'), 300, "Test", NewDocumentMode.RGB);
       // we want to create a new text layer so create a new TextOptions with the contents as the argument
        var opts = new TextOptions("Blah-blah-blah!");
         // override the default settings
         opts.layerName = "Test";
         opts.kind = TextType.PARAGRAPHTEXT;
         opts.height = 800;// pixels
         opts.width = 200;
         opts.position = [ 0, 0 ];// pixels
         opts.justification = Justification.CENTER;
         opts.font = Text.findFont("Minion Pro Bold");
         opts.size = 6;// not sure what unit this needs
         opts.color = Text.toRGBColor(0, 174, 239);
  
         // create a new text layer with those options
       var layer = Text.addNewTextLayer(doc, opts);
  
         var opts = new TextOptions( layer.textItem);
         opts.contents = layer.textItem.contents;
         // now need to construct TextStyles for each range we want to set
         // for ranges we can only change the font, size, and color
         // first set a textStyle that matches the TextOptions
        var s1 = new TextStyle(undefined,undefined,undefined);
         // now set a textStyle for each different style you want
        var s2 = new TextStyle(undefined, 12, Text.toRGBColor(0, 0,0));// for some reason size values here are not the same scale as above
         // define more TextStyles as needed. here we only need one
  
        // Now create the set of ranges to apply the styles over
        var ranges = new TextStyleRanges();
         // the first range must start at 0.  In this example we want the first range unchanged
         // so we use the TextStyle that matches the TextOptions
         // this range covers the entire contents
        ranges.add(new TextStyleRange(0, opts.contents.length, s1));
         // this range covers the middle 'blah'
         ranges.add(new TextStyleRange(5, 9, s2));
          // we now add the ranges we set to the TextOptions
        opts.ranges = ranges;
  
         Text.modifyTextLayer(doc, opts, doc.activeLayer); 
  
      };
  
      tsrDemo();
  

• Cannot create the initialization block in OBIEE 11.1.1.9

  Hello

  I am trying to create my first block of initialization in OBIEE 11.1.1.9. After I select New Options in Menu-> Session-> initialization block, I get a window. I press the button "Edit Data Source...". "but I can't select the Connection Pool.

  Kind regards

  Nestor

  Hi Nestor,.

  Try to create a separate initialization block connection pool. Then check if the connection pool is available in the initialization block.

  OR

  Check the Tools--> Option and the first connection Pool allows to Init Block is checked or not.

  

  Thank you!

• Cannot create the text

  This is my first shot using Photoshop and after downloading PS6 on my computer at home and the laptop yesterday evening thanks to a subscription of Adobes, I immediately ran a question about the two systems running windows 7.  Question: I am unable to create any kind of visible text or get the lines or the slider that show as I type.  I messed up with the police (which makes greater/smaller) and my text color is different from my background and still no luck.  Once I type something however and start a new layer then I see my text appear in the window of the layers on the previous layer.  Any suggestions on how to solve this problem would be appreciated.  I apologize if this question has already been requested and we responded and I missed it.  Thanks in advance.

  Try the following steps:

  

  Open 'Preferences of Performance' as shown above. Under Windows, this parameter will be available under the tab 'change '.

  

  See the 2 boxes highlighted on the screenshot above. Check if the option "use graphics processor" is selected. If this is the case, click on '1' advanced settings.

  

  Choose "Basic", as shown in the screenshot.

  Click OK and try to create the text.

  If it still does not work, go back to the 2nd screenshot, disable the 'Use graphics processor' option by unchecking the checkbox (2), as shown in the screenshot and see if that fixes it.

• Create the text block and flow of

  Dear friends,

  I need your help "very urgent."

  How excess content stream of framework (table) text for the next block of text? The following image must be created.

  Front

  

  I need after-

  

  Please suggest friends

  Thanks in advance

  KS

  If you select a textframe, you already have a textframe. So, if you choose app.selection [0] .textFrames [0], this means an anchored within a textframe textframe.

  And: You try to create your textframe on page 1. But you must add the new textframe on the page following the page of your choice.

  So, try this one:

  var curDoc = app.activeDocument;
  var frame1 = app.selection[0];
  var parPage = frame1.parentPage.documentOffset;
  var frame2 = curDoc.pages[parPage+1].textFrames.add({geometricBounds: [50, 50, 100,100]});
  frame2.previousTextFrame = frame1;
  

• Cannot group the text block with the linked object? (Advice, please!)

  6 inDesign doesn't let me a block of text with a related group object. (The block of text is aligned with the top of the object and the object is a placed .psd file).

  Perhaps my problem comes from the fact that ID doesn't let me choose both at the same time? It's one or the other, and the program refuses to do both. I inherited this program and the file I'm working on, in my work and I got a learning curve (frustration). It is perhaps an obvious question, because my skills are still pretty rough.

  Anyway, InDesign gurus... Please help! I've been working this for more than an hour, and it drives me crazy!

  Thanks in advance.

  Looks like the image is an anchored object. It's the only thing I can think of would select several items.

• cannot create the file of text using fpga

  I spent an entire day to solve this problem, if someone help me please!

  I have two types of registration data, movement and time. I looked up NI EXAMPLE FINDER and copied the format to create the text file. but the file dialog box is not pop up. So I thought I did something wrong with the function of the dialog box, but when I copy the first part of my code, the dialog box appears. If anyone can check my host vi and tell me what is the problem? I downloaded the target vi as well.

  I use crio 9074, and vi is made in mode of fpga.

  Hi Ultrafrog,

  The RT vi or vi FPGA screws?

  In FPGA, you cannot file i/o. But you should be able to do this in your vi RT it seems you are trying to apply it on the FPGA.

• In Illustrator, I've created a text box and cannot change the font color of black.

  In Illustrator, I've created a text box and cannot change the font color of black. I tried changing each CMYK percentage individually, but it stays black. I have not had this before. What is going on?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  akayshay,

  If I (put) understand, you can simply create a region Type, and then select with the normal (black) selection tool, then set the fill color to none in the Toolbox, and then click Add a new fill in the appearance palette and with the selected fill (yet) set your colour (ing) desired.

• Framework in the context of text block text block

  Hi, I feel I ask a stupid question but I am about to throw my computer out the window, so I have about him asking anyway.

  I have a layout of book with a stream of regular text in any of the pages (my body text), but I created a line object with a text block I want to screw together in case goes on 2 pages, when I try to click on the Red [+] to connect the 2 text block, I can't. It wont let me click on it, I tried command - click as when you want to select an object in another, but it does not work.

  Is it possible to have a block of text within another framework? Maybe I did it the right way. Can someone help me with this please?

  Thanks in advance

  On the photo I cercled in red that I would like to be linked together (2 bluish objects), the thread of text that is already there is my block of text type where is my body text.

  

  You cannot screw anchored text frames.

  Bob

• Cannot create partition during the Windows installation.

  Hey

  You have a problem with the installation of Windows (10 or 8.1, same problem). I share the part Boot Camp using the tool, but once I'm in the installer that I meet a problem. I format the BOOTCAMP partition scored, but then Windows says that it cannot create a new partition.

  Some impressions diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage GB internal Drive disk1s2 648.9

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 350,5 GB disk1s4

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 764,0 GB disk2

  Logical volume on disk0s2, disk1s2

  4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  Fusion unencrypted drive

  List of CS

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group C4FDFFD0-7D27-4DCC-9034-2D19E7487DCD

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 769855381504 B (769,9 GB)

  Free space: 180224 B (180.2 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 648866529280 B (648,9 GB)

  |

  +-> FDD23DD2-C30E-4575-B7B1-50CBCB539D10 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 763999944704 B (764,0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  Daniels-iMac: ~ danielzandian$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  You can also post the output of

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  What is the year/model of your Mac?

• Cannot create a new folder name

  Cannot create a new folder and name it.  The name I give always comes back again record when I hit enter.

  I'm assuming that happens with all new folders in the special folder that you use and that you use a "legal" name for the folder - but that is determined when you answer questions of Malke.

  It's maybe a permissions issue.  You will have to perhaps take full rights on the folder or even take in charge of the case.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the API blocked

  I created a web application bb factory using the web works for Visual Studio plugin. I tried to install the application and got the error cannot access the api blocked. I researched and found that the fact of not having signed app can cause this error. I followed the instructions that comes with the plugin on the signing of the app.

  • In Microsoft® Visual Studio®, on the Tools menu, click on install BlackBerry signing key.
  • Navigate to the folder that contains the file signing key (.csi).
  • Click OK.
  • Type the PIN registration and the password for the private key.
  • Click Save.
  • When the success dialog box appears, click on exit.

  When I try to install the application, I get the same error message. Do not install the key and sign the application correctly? Help, please

  Have you installed all the three keys?

• Windows 7 - cannot create new file - Option here, but nothing happens or a single available case

  Windows 7 - cannot create new library folder.

  The "new folder" is on the menu but nothing happens when you click it.
  Right-click in the library and the NEW is an option, but only the towel is available.
  I tried selecting 'Launch windows in a separate process' in the list options. It does not work.  It's been some time on.
  I downloaded "File Menu Tools" program (Cnet?) and makes me at least an option to be able to create new folder, but I fear that there is something wrong somewhere.
  Yes, I use Chrome. I uninstalled Java 7. I have the McAfee antivirus software.
  Page-Ecran-
  
  Thank you

  You have installed chrome? It is an update of Chrome, (mid), is responsible. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

• Cannot create a folder. Win 7 64 bit.

  Cannot create a folder. Have a 64-bit Windows 7 system. Unable to create a folder on an external drive or on the C drive? When you press the button NEW FILE, it does nothing. If I right click on a drive and select NEW, everything that can be created is a Briefcase. If anyone can help with this question? Thanks Jim B.

  You have installed chrome? It is an update of Chrome, (mid), is responsible. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.