Cannot create the air file because the certification has expired.

I followed this tutorial and I had problem with certification has expired.
So, I looked in the Air forum and found http://forums.adobe.com/message/2320586#2320586 , which is the same problem, I've met. Unfortunately, there have not been resolved.

I'm looking forward to your suggestion.

Could check you the machine clock? Synchronize clock with internet t

o make sure that it is correct?

Once you do this, try to generate a certificate and package AIR file again.

So far, we find out that almost this problems happen because the computer's clock is off.

Tags: Adobe AIR

Similar Questions

Advance Mode XP Backup, twice after backup is complete, cannot create an ASR file because I did not insert a floppy disk. I insert a disc in my drive, please help me how do.

Running a WindowsXP Professional, I tried twice to my systems backup using the Backup Wizard. Twice tried to use advanced mode to save. I have 3 choices, first Assistant backup, Second, Assistant food and finally Assistant recovery. I clicked on the wizard of recovery of automatic systems, the wizard to create a backup of the two parts of my systems, a diskette that has my systems settings and other media that contains a backup of my score of local systems.

Twice I tried to insert a disc into my drive and started to click on column e ASR. so to start the long process of backing up my files, after almost two hours later my backup files already completed, a screen appears saying: this isn't in my Wizard floppy drive cannot create ASR inside. He needs a disc with an ASR info, more data backup systems to restore my computer if it meets a major systems failure. My problem is, how to set the disk to my systems before starting settings to back up my files and data with the systems Advance Recovery Wizard first. Thank you.

Hello

I suggest you to refer to this link and check if it helps:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ntbackup_adv_backup_options.mspx?mfr=true

It will be useful.

Cannot create the C:\WINDOWS\system32\drivers\drive.sys file

Cannot create the file 'C:\WINDOWS\system32\drivers\drive.sys '. The process cannot access the file because it is being used by another process.

I get this error message all the time on my desk. No matter what I do, internet research, watch videos, listen to music, work offline, it does not apply to just be online. I really want to know how to solve this problem, I searched everywhere I could, and I can't find again no anwer. Please reply and if you want more information, then I'll be happy to provide.

Thanks for your time.

Hello

I suggest you to follow these steps and check if that helps:

Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135

NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

It will be useful.

ORA-19504: cannot create the file '+ DATA '.

Hello everyone.
This is the scenario:
We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.
For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.
I tried the simple guide that I found which is:
(1) copy the backup files cold /somedirectory
(2) start OLD database with nomount
(3) connect RMAN with OLDER as an auxiliary
(4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.
Here's the result (I deleted some lines because of the size of it):
----------------------
RMAN > ProdDB to OlderDB DUPLICATE DATABASE
2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.
3 > NOFILENAMECHECK.
4 >
From October 1, 14 Db double
content of Script memory:
{
clone of SQL 'alter system set control_files =
"+DATA/OlderDB/controlfile/current.829.859839217" comment =
' Set by RMAN "scope = spfile;
clone of SQL 'alter system set = db_name
"ProdDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"OlderDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';
change the clone database mount;
}
execution of Script memory
SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile
SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile
(...)
From restoration to 1 October 14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
channel ORA_AUX_DISK_1: restore the control file
channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03
output file name=+DATA/OlderDB/controlfile/current.829.859839217
Restoration finished in October 1, 14
mounted database
output channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
content of Script memory:
{
until the SNA 274262921.
the value of newname for datafile clone 1 again;
the value of newname for datafile clone 2 again.
the value of newname for datafile clone 3 again.
the value of newname for datafile clone 4 new ones;
the value of newname for datafile clone 5 again.
the value of newname for datafile clone 6 again.
the value of newname for datafile clone 7 again.
restoration
database clone;
}
(...)
From restoration to 1 October 14
using the ORA_AUX_DISK_1 channel
channel ORA_AUX_DISK_1: from the restore backup set data file
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA
channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA
channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
ORA-19504: cannot create the file '+ DATA '.
ORA-17502: ksfdcre:4 cannot create the file + DATA
ORA-15041: diskgroup space 'DATA' exhausted
switch to the previous backup
Oracle instance started
(...)
content of Script memory:
{
clone of SQL 'alter system set = db_name
"OlderDB" comment =
' Restore the original value by RMAN "scope = spfile;
clone of SQL 'alter system reset db_unique_name scope = spfile;
clone to stop immediately;
}
execution of Script memory
Errors in the script of the memory
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
ORA-06512: at line 1
RMAN-05556: not all data files have backups can be recovered on SNA 274262921
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014
RMAN-05501: abandonment of duplicate target database
Complete recovery manager.
------------------------------------------------------------------
The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.
First thing I took a glance was ASM occupation but it enough available space.
The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.
One have some advice on what I should look for?
Thanks in advance sorry for my English.
Select this option.

Hello.

Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

But I solved my problem... To the auxiliary database, I added the following to the spfile:

DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required folder.

I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required file"Please help me. I tried various solutions on the web. None of this has worked.

Please run repair permissions from disk with disk - Apple Support utility

~Assani

KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

Hi dakota25,

·         Did you do changes on the computer before the show?

·         You are able to install other updates successfully?

·         You get the error message?

Follow these methods.

Method 1: Temporarily disable the security software.

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

(a) click Start, run.

(b) type msconfigand click OK.

(c) the System Configuration Utility dialog box appears.

(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

(e) when you are prompted, click on restart to restart the computer.

Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

http://www.Microsoft.com/downloads/en/default.aspx

Method 4: Follow the steps in the article.

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

You cannot install some programs or updates

http://support.Microsoft.com/kb/822798

I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

You have Outlook open when you save? You need to close.

Hope this helps

Post back if necessary

___________________________________________________________

If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Error in retrieving the metadata of HFM. Cannot create the file

In our HFM 11.1.2.3.503, we get an error when we try to extract metadata from any application of HFM. The States of error message failed to create the file.
We are on hfm.501 but I tried with connecting to 503 to see if it solved the problem, but there was no solution in sight.

Error code: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}

Summary of Message System

Cannot create the file.

Details of the Message System

Error reference number: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}; User name: BI-DEMOS5$
NUM: 0 x 80040230; Type: 1; DTime: 16/12/2015-21:27:04; SVR: BI-DEMOS5; File:; Line: 0; Worm:;

There is no indication where he tries to put all the files so that I could try to find out if there is a setting somewhere pointing to a folder that does not exist or similar.

Try the revision of the following document:
- Hyperion Financial Management (HFM) error "unexpected error: 80040230 has occurred" trying to to Scan, load or extract meta-data (Doc ID 1282089.1)

ORA-19504 cannot create the file "+ FRA/test1".

Hi all
OPERATING SYSTEM:-RHEL5
DB version: GR 2-11
I'm trying to save a tablespace in the slot path mentioned using the script below
RMAN > backup tablespace users of devices type disk;
But what exactly is the error I get: -.
RMAN > backup tablespace users of devices type disk;
From backup 2014-01 - 09:12:37:44
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 23 type of device = DISK
channel ORA_DISK_1: starting full datafile from backup set
channel ORA_DISK_1: specifying datafile (s) in the backup set
Enter a number of file datafile = name=+DATA/orcl/datafile/users.259.836129771 00004
channel ORA_DISK_1: starting piece 1 at 2014-01 - 09:12:37:44
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the 09/01/2014 12:37:45 channel ORA_DISK_1
ORA-19504: could not create the file "+ FRA/test1".
ORA-17502: ksfdcre:4 cannot create the file + FRA/test1
ORA-15005: name "test1" is already used by an existing alias
Configure it order what I did is: -.
RMAN > CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT "+ FRA/test1";
and I create the destination required "+ FRA/test1".
Thanks in advance

How about using below

Set UP the FORMAT of DISC TYPE CHANNEL DEVICE "+ FRA/orcl/test1_t%t_s%s_p%p";

Concerning

Anurag

ORA-20100: error: failure FND_FILE. Cannot create the file
Hi all
Simultaneous application of Bellow error

We using ORACLE 10 g. R12
OS: RHEL 4.4 (LINUX)

---------------------------------------------------------------------------
Execution of the expedition: Version: 12.0.0

Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.

Module WSHINTERFACES: Interface travel Stop - SRS
---------------------------------------------------------------------------

Current system time is January 27, 2013 09:58:58

---------------------------------------------------------------------------

* Starts * January 27, 2013 09:58:58
Error ORACLE 20100 in FDPSTP

Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Cannot create the file, l0633393.tmp in the directory/usr/tmp.
You can find more information in the applications log.
ORA-06512: at the 'APPS '. FND_FILE', line 554
ORA-06
---------------------------------------------------------------------------
Beginning of the FND_FILE log messages
---------------------------------------------------------------------------
---------------------------------------------------------------------------
End of the FND_FILE log messages
---------------------------------------------------------------------------

---------------------------------------------------------------------------
Options, AutoComplete, the request for enforcement.

End of query options AutoComplete.

---------------------------------------------------------------------------
Simultaneous request ended
Current system time is January 27, 2013 09:58:58

---------------------------------------------------------------------------
This issue is related to the Oracle EBS, mark it as here the answer and open it

Oracle Discussion forums' E-Business Suite

Cannot start db > ORA-09925: cannot create the audit trail file
version 10.1.0.5.0
AIX 3 5 00C9CEA04C00 dcxnim01

When I'm trying to start db, getting this message any idea?

SQL > connect virtue sysdba;
ERROR:
ORA-09925: cannot create the audit trail file
IBM AIX RISC System/6000 error: 89: invalid file system control data detected
Additional information: 9925
ORA-09925: cannot create the audit trail file
IBM AIX RISC System/6000 error: 89: invalid file system control data detected
Additional information: 9925

Here's the tail of the log of alerts

3 Private_strands to the log command
Thread 1 Advanced for you connect to sequence 3923
Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
Fri 6 Aug 16:48:34 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
Fri 6 Aug 16:48:35 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
Fri 6 Aug 16:48:38 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
ORA-27072: IO file error
IBM AIX RISC System/6000 error: 5: i/o error
Additional information: 9
Additional information: 3
Fri 6 Aug 16:48:38 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
[ORA-07445: exception encountered: core dump [] [] [] [] []]
ORA-27063: number of bytes read or written is incorrect
IBM AIX RISC System/6000 error: 5: i/o error
Additional information:-1
Additional information: 1024
Fri 6 Aug 16:49:07 2010
Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
ORA-00470: LGWR process ended with the error
IBM AIX RISC System/6000 error: 5: i/o error
Additional information:-1

Problem of the OS.
What is the problem at the level of the BONE with the disc?

unpacking of tail - 100

Get the dreaded cannot create the required file: blah blah blah in lightroom problem

Get the dreaded cannot create the required folder: / Users/My Name/Library/Application Support/Adobe/Lightroom/develop Presets. issue. I tried the suggestions on this forum without result

Hi eqracer,

Could you please provide read and write permissions to the Adobe folder for your account and the Admin account.

You must provide the permissions in the following folder: / Users/My Name/Library/Application Support/Adobe /.

Kind regards

Tanuj

Error Lightroom: You cannot create the required folder

Hello
I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:
There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.
Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.
Can someone help me? Please

Hi viviang,

Greetings!

There is a permission problem.

Try to give permissions to both libraries (library system & user library) and the Applications folder.

For the Applications folder

---------------------------------

Open Finder

On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Done with file applications here.

For the user's library

-----------------------

Open Finder

Click OK at the top of the page and select 'go to folder '.

Type "~ / Library ' and press go

Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Made with the user here library folder.

For the library system

----------------------------

Open Finder

Click OK at the top of the page and select 'go to folder '.

Type "/ Library" and press go

Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

Inside you will find sharing and permissions - Click on this

You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

Give read and write at all.

Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

This measure will apply privileges and which can take some time depending on the size of the file.

Once this is done, click the lock icon, and then close the get info window.

Done with the record of the library system here.

Please let me know if it works

Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

Concerning

Jitendra Khatwani

ColdFusion 10 - cannot create the database

I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:

Server product	ColdFusion
Version	ColdFusion 10,282913
Edition	Developer
Operating system	Windows Server 2008 R2
OS version	6.1
Update level	/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
Version of the Adobe driver	4.1 (build 0001)

Details of the JVM

Java version

1.6.0_29

History of this server:

A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.

I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

Error just after the attempt to create the data source:

Connection verification failed for data source: andHalt

org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

at java.lang.Thread.run(Thread.java:662)

Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

... 13 more

Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

... more than 10

Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

at java.security.AccessController.doPrivileged (Native Method)

at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

... more than 10

= launch nested exception, level (1) =.

java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.