Cannot debug/run app in the Simulator

Similar Questions

• Cannot debug/run app in the Simulator from IDE update

  I did the error has earlier to upgrade my momentics IDE to 2.1, and since I'm unable to successfully launch my app to the market or debugging in a simulator. The application loaded on the Simulator and I can run from the home screen by pressing on it, but while the splash screen is displayed, the application stops immediately when launched from the IDE. There is no error message displayed in the console, the application stops just immediately after the splash screen is displayed.

  I tried with five simulators which worked very well all the way from 1.0.x to 10.3.x. I am lucky to have an old copy of the 10.1.0 IDE still on my system and I can run and debug my app very well using this one, but I would really be able to use the IDE to 2.1 again. It worked fine on the 2.0 IDE too, these problems just started to happen after the 2.1 IDE update.

  Has anyone else seen this, and if so, have you found a solution?

  OK, never mind. I accidentally upgraded my old working version of the IDE too all by improving the SDK (I forgot that it updates too the IDE) and panicked because then it would be not too run or debug from the IDE. I solved it but by uninstalling the TWO versions of the IDE, then put it back up from scratch. After the clean install, everything is fine and I can run and debug fine with 2.1 IDE.

  I guess it's something messed up with the upgrade process. A fixed.

• Cannot run app in the Simulator!

  Hello

  So I did the project using Flash Builder and since the SDK is buggy and can't be packaged and signed using Flash Builder, I have updated the content property of the XML to "App.as" and packed using the command line. I also did the 2 step of signing process.

  Now I have installed the signed bar file using the command line, and when I open the app, I see a gray screen!

  I think that 'App.as' is an action script file which I use in the tag content. On the other hand, Flash Builder creates a SWF file using this and which uses as content. My question would be, how can I do?

  In addition, no one knows about the next SDK release? This SDK is really buggy!

  Hey Foundation.

  you mix two steps into one. Please do the following:

  1. Change your content of the tags in the - app.xml back to the original value. so, something like this:

                             [This value will be overwritten by Flash Builder in the output app.xml]
     

  2. Then, you need to compile your application. After resetting the - app.xml under your src directory, you can do this part in flash builder. to do this and after measurements, please carefully follow the instructions in this thread:

     http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/useful-tip-package-images-via-com...

  After that, you should be able to package and sign your App. Good luck!

• To open the app in the simulator of BB 10 Alpha Dev in debug mode

  Hello

  I develop black berry 10 webworks app. I use the latest version of the sdk provided and the dev alpha 10 blackberry Simulator to run the application. I am also using the ripple chrome emulator to test and debug the application.

  I want to debug the application on the simulator using the browser webkit or something like that, but for some reason I'm not able to do.

  While the application of packing, I inserted the - d option. It says on the bb site which

  "With your application running in the Simulator in a desktop browser, type http://:."

  I tried to but could not see the application in debug mode.

  I tried port numbers, since I was on the apache server

  8080,8181,85...

  Could any body help me with this

  Thank you very much in advance

  See you soon

  Because you added the - d option, it should work very well. All you need to do is put the device/Simulator in developer mode (settings-> Security-> Developer Mode) and I guess you have already done this. In almost all cases, I worked with BB PlayBook and BB10 all what you need to do now is the point of your browser Chrome this URL + port:

  http://:1337
  

  The INVESTIGATION period should not be the problem since you already deployed the app on the Simulator, I guess? So give it a try with the port number and it should work now.

• Can not see my App in the Simulator

  When I run (debug-> go) apply for BB JDE, Simulator starts. When I load my .cod on Simulator file using the file menu-> Java program load. I don't see my app in the Simulator. Please tell me what to do. I want to debug and test my application.

  In the JDE Menu "project / all of the ongoing projects.

  Only the project asset (s) copied.

  AND... Look in the folder for downloads on the Simulator - your application will not be on the homescreen of icon.

• How to exit an app in the simulator of Playbook Tablet?

  Hi, I have just compiled the sketchpadstandard in an application and have it currently running in the Simulator.  How do I exit/quit out of the app in the Simulator?

  I found my answer.  There are 'slide' to the top of the black bar at the bottom of the Simulator.

• ' - deb.. ' appended to the app in the Simulator?

  I updated to the latest version of the SDK (1.0.6) and simulator of PB and I have an AIR application.

  After the first launch (debugging) of my application the name of the application under the icon of the app in the Simulator shows ' [ApplicationName] - deb... "(without the quotes).

  [ApplicationName] is the name that I entered the node of the [ApplicationName] - app.xml file, but where is the '-. deb ' come from? And who has also been added on the real PB? If so, how can I avoid this?

  It's "-debug" which is added to the app.xml file while you are debugging. Release final version deletes it.

• Not found payment module: Get cannot start my application on the Simulator

  Hi guys,.

  My project successfully compiled the JDE 4.5.0. But I am after the error message when running the app on the Simulator:

  Starting MyApplication
  Searching installed codfiles for alias 'paymentapi'
  Searching uninstalled codfiles for alias 'paymentapi'
  Module 'paymentapi' not found.Error starting MyApplication: Module 'paymentapi' not found.
  

  I added some paymentapi.jar for my project. Project-> properties-> Build tab-> any Jar files.

  What's wrong?

  Please guys advice.

  Thank you.

  I found the solution. We need to compile the JAR file in a new project.

  Here's how:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Compi...

• Help me! Cannot delete app in the Simulator.

  I want to remove my application from Simulator to test some things. I go to Option-> advanced-> Application-> Module Option and remove my app, but after simulator restarts. My application still remain. Help me! Thank you.

  Go to the directory of Simulator and manually deleting the file DOC.

• Can deploy app in the Simulator, but not to the device

  Sorry about this newbie question, but how is it that a simple HelloWorld application compiled in Eclipse runs just fine on the Simulator, but cannot be installed on a 8320 Curve by the Blackberry Desktop Software?

  I use the latest version at all.  The message returned by the desktop software is:

  ! There was an error importing files.
  No additional applications can be found. Your file can
  contain applications that already exist in the list of applications,
  are not compatible for your device, or errors.

  However, I am able to deploy the application on the handset using the command line tool:

  C:\Eclipse\plugins\net.rim.ejde\vmTools\JavaLoader.exe -usb load \workspace\HelloTest\deliverables\Standard\5.0.0\HelloTest.jad
  

  This installs the application, which then runs correctly on the device.  I can then reload the list of app on the Blackberry Desktop Software tool and it shows HelloTest, but under the properties of the Application-> dependencies it says:

  "Application not available (net_rim_cldc).

  It seems that some dependence crept in the generation of the application and that confuses the desktop tool.  The curve is running 4.5 OS.

  Should I just throw this office tool, or how can I clean the application so that it installs correctly?  Obviously, this is just foreplay before building a much broader application, and I wish I had these little glitches will hamper ASASP.

  Thanks for any help!

  You should be able to download a plugin 4.5 on the site to update. Go to "help > install new software" to open the screen of software available. If you have not yet done so, add the updated BlackBerry site to your Eclipse configuration:

  1. Click on "available software Sites.
  2. Click on the button 'Add '.
  3. Enter a name such as 'BlackBerry update location' and set the location http://www.blackberry.com/go/eclipseUpdate/3.5/java
  4. Click OK, then OK again to return to the screen of the software available

  The 'working with' menu drop-down, select the location of BlackBerry Update (or whatever you named it). Expand the BlackBerry Java plug-in category and you should be able to select an appropriate plug-in version.

• Cannot find my application on the Simulator

  Hello

  use eclipse ide for the development of the BB application.when I run my application on the Simulator, I can't find my application in the downloads (simulators) .plz help me

  Krishna,

  Have you created a debug or run your application configuration?

  Follow a previous post of mine:

  http://supportforums.BlackBerry.com/T5/Java-development/how-can-I-add-applications-to-my-BlackBerry-...

• My app in the simulator of loading

  Complete n00b question - how to run my code in the Simulator?

  I use the JDE and I have the program "hello world" just one of the examples.

  I create the project and press F5. The Simulator starts and loads of Blackberry OS.

  Now how my code?

  I tried the following:

  -File--> load Java program...--> open my .cod file. No effect.

  -Find my program in the list of applications. He isn't here.

  -throw a NullPointerException in my main() function. Nothing.

  Did I miss something blatantly obvious? Thank you.

  Open your JDE application and select from the menu: build together and Run

  Find the icon for your application among the other icons on the screen of the Simulator and run your application.

  If you have not set the app to your app icon - there is a simple square icon for your application. Take a look at app names appear under the icons. And select your application.

• Cannot debug/run on iOS 7.03, iPhone 5 s

  I'm building a donkey with ipa, it can be debug/run on iOS7.12 - iPhone 4, iOS8.13 - iPad 2, iTouch 5

  but it cannot be debug/run on iOS 7.03, iPhone 5 s

  Hello

  Thank you for reporting this issue. Inviting you to provide a sample project containing the action script code, so that we can reproduce this problem at our end.

  Kind regards

  Adobe AIR Team

• Quick help please - App in the Simulator

  Hi guys,.

  I hope that for a quick resolution here to get my apps submitted before the deadline for the free playbook

  I went through all the tutorials and successfully signed my android applications and managed to get the icon to the simulator by clicking the .bar created in eclipse and then go to blackberry tools and then install, but when I click on the icon in the Simulator, he opens says «Initializing please wait...» "then after about 30-45 seconds, the start of blackberry screen appears and then just goes back to the home page.

  Someone else this experience? Can you point me in the direction of what can go wrong?

  Thank you

  Ian

  Thanks to everyone on this thread and the other thread problem for their suggestions to solve this problem.

  I had the same problem, but I would just add something that makes the Simulator works for me...

  -Already put 2 carrots on WMware, as suggested elsewhere. Still the Simulator was not for me.

  -Put the monitoring high task (for processes in WMware Windows Task Manager)

  and finally it worked! Works quite slowly, but I found this on other computers: at least it opens the app!

• Cannot debug/run virtual Tablet

  Hey guys,.

  I followed the tutorial as blackberry on their site for the installation of their tablet SDK and manufacturing and the operation of the Hello world app.

  I have Adobe AIR installed correctly and I have Adobe Flash Builder 4.

  On the installation of the SDK Tablet Blackberry I tried to integrate the Adobe flash builder SDK, but he continued to come on up with the message 'Incorrect Adobe Flash Builder directory' when the directory I chose was the folder that the program was installed in.

  So I decided not to include it and I did the installation

  Then I made the code for the Hello world app in Flash Builder (even after following the tutorial), but when I try to debug the Blackberry tablet is not an option for him. There is just Application Desktop and Web Application. While on the tutorial it says there should be an option of Tablet blackberry

  Can anyone help? I'm really stuck

  Thank you

  Chris

  OK, so from the looks of it, you must refresh your flash builder 4.0.1 to 4.5 (Burrito). 4.0.1 is just an update while 4.5 Burrito is a whole new 'upgrade '. its still in the preview but it works well.

  Here is the link for the update of flash builder 4.0.1:

  http://www.Adobe.com/support/Flex/downloads_updaters.html#Flex4

  and here is the link for the burrito, if you want to go this route:

  http://labs.Adobe.com/technologies/flashbuilder_burrito/

  After you do the update of re - run installation of SDK blackberry from scratch and is no longer, you should get all the errors. the reason why you could not install less than 4.0 was because previously it would install but users encountered incompatibility issues so I guess that they hard-coded installation so it is not yet install to the 4.0 until updates user 4.0.1. hope that helps and good luck!