Cannot display useraccounts in computer management

Similar Questions

• computer management does not display services properties

  I am running windows xp.  I have a multitude of programs that won't run.  This seems to be the result of stopping some services or changing a property in the management of the computer.  Backup and restore are not running at all, not even an error since the desk top.  Internet Explorer will not work.  CPP will not start.  .Net runtime op... will not turn on, start, or view properties.  None of the computer management services show the properties.   Not active album or start or display properties.  net port sharing. TCP will not allow, start or display properties.  Network DDE will not activate the starting or display properties.  Reduced programs do not display the taskbar.  1068 and 1058 errors disk logic Server Management error.  Msconfig does not solve this problem not start in safe mode.  How can I fix this computer?

  Hi Tommy,.

  If you find that the Windows disc is faulty, access the link below for more information on how to get the replacement of Microsoft software.

  http://support.Microsoft.com/kb/326246

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Error message "the website has encountered a problem and cannot display the page you are trying to view" when trying to install updates in the Windows XP computer.

  Original title: update problem.

  Cannot open microsoft live mail, are unable to update, this message popsup 'site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"what is the solution

  Hi AbelGomes,

  1. What is the number of KB updates, that you can not install?

  2 did you change on your computer before this problem?

  For the issue of the update of Windows, you can follow this link:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update.

  Due to Windows Live Mail, you can ask your question in this link:

  http://answers.Microsoft.com/en-us/windowslive/Forum/email

  Hope the helps of information.

• My computer says I am connected but my internet says cannot display this Web page

  Vista connection problem

  I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

  Hello, Scottyookiss00,

  Launch IE without Add-ons

  Start > type Internet Explorer

  Select Internet Explorer (No Add-ons)

  You are able to access the site now?

  If so, reactivate the modules one by one to determine the origin of the problem.

  Try the steps here:

  http://support.Microsoft.com/kb/956196

• [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I get following error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  Thank you

  Marilyn

• Computer displays Internet Explore cannot display this Web page?

  Computer shows the IE cannot display the page load?  I tried to go to google chrome and an error 310 (too mauger) redirects) help!

  This problem only recently begun? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of internet connection problems reported for most, if not all, entry.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• Computer stuck on error at startup "this program cannot display this webpage".

  Original title: Computor stick on error.

  When I start my windows xp, it goes through the normal process and goes straight to the "this program cannot display this webpage". Then, it freezes on it. How can I erase this.

  Hello

  I'll start by saying that, although I have met exactly the conditions you describe with the PC to one of my clients just yesterday, what may not be your problem.

  The problem was my client was caused by the weelsof.c Trojan horse.

  Attempts to start in SafeMode only a restart after a few seconds. Isn't the same case for you? Normal boot gave exactly the symptoms you describe.

  Somehow, I suggest that you look for the virus. I couldn't do it with the infected PC, so I had to remove the hard drive and a disinfection in another PC. I checked for the virus in turn with MSE, SAS and MBAM. The MSE analysis found and removed two files associated with the Trojan horse weelsof.c. The SAS and MBAM scans showed no malware. After re-installing the drive on the original PC it started as a customer would normally expect and another scan MSE (after leaving it connected to the internet for several hours) was also negative.

  If you cannot start in safe mode to scan malware for yourself, my methods may be practical for you, in which case a repair shop is your best bet, ideally one that you can get a recommendation for.

  Tricky

• Gives Windows Update: Internet Explorer cannot display this webpage

  MS Windows XP Home Edition version 2002 SP 3 Norton Internet Security 2010

  Start button...  Windows Update... immediately pops up a window of Internet Explorer 8, saying "Internet Explorer cannot display the webpage."  with a diagnose connection problems button leading to say there is nothing wrong with the connection.  No error code is displayed.

  Tried several times over several days.  Not good.  Tried to type the URL in the address field.  Same result.  Tried to access various Microsoft Windows Update web pages from within the Microsoft site.  Same result.  It almost seems as if "windows" & "update" is in the address, it does not connect.  I tried Windows malicious software removal tool.  No solution.  Tried all the Norton Scans.  No solution.  Completely removed Norton.  The same problem.

  Windows Update worked until we made an update of Windows in 5/10, date at which we replaced Internet Explorer 6 with IE 8.  Since we cannot get Windows Update.

  He could have something in the updates of Windows that blocks access to the updates?  He could have something in IE 8, which blocks access to updates?

  Please don't give me the answer 'wipe the hard drive & reinstall Windows '.  It's a typical 'COMPUTING solution' which means 'I don't know what the problem, then that & everything will be fine.'  But in doing so, it will result in DAYS of relocation & configuration of all programs on my PC!  If you don't know the problem, tell (or do not).  If you KNOW what is really causing the problem and have a solution, I would be VERY grateful to hear from you.  Thank you.

  I had this problem in my store with several client computers.

  Scenario - IE browse websites ok. But when you try to manually run the updates of Windows, internet explore announcement that that the page cannot be displayed. The same also happens with Microsoft Updates.

  I read a lot of discussion online, and many people do not yet have a solution.

  Here's what I found... and every machine I have dealt with regard to this problem, in the last 4 months, have all had a rootkit virus infecting NETBT. SYS file in windows. Analysis tools more do not seem to pick up well. AVG, Malwarebytes, Norton... I know that these three would not pick it up.

  Launch the latest Combofix it cleans well. If there is. And so far, I have managed to solve a good 6 computers by replacing the NETBT. SYS file.

  So, if all else fails... check that. ;-)

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• by clicking on download free firefox internet explore announcement that cannot display the Web page

  Firefox has stopped working on a single computer. When I click on the Firefox icon, it says "cannot find Mozilla runtime" has happened several times in the past and every time that I just did a free Firefox download it again and it fixed the problem, now when I try to make the free Firefox download internet explore says it cannot display this Web page. I tried to do a free download of Firefox on all three computers in my office and get the same message even on computers where Firefox works correctly.

  Download the installer of Firefox on another PC of https://www.mozilla.org/en-US/firefox/all/ and transfer it to the problematic PC via a USB key?

• Cannot display URLs

  Cannot display the complete rankings (http://www.pgatour.com/leaderboard.html) on the site of the PGA TOUR. I have information of the site COMPUTER he uses Javascript and pop-up windows. It's white table in "Content" FF.

  Firefox needs to load the page with the default settings.

  You can delete a possible user.js file and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Firefox cannot display Chinese characters correctly. How to fix?

  I have portable firefox with the add-on Chinese language pack, but whenever I open any website in Chinese, the characters are not correct this so I couldn't recognize them.

  Firefox cannot display CJK characters unless East Asian language support and CJC fonts are installed.
  
  XP this is not the case by default because two support East Asian languages and languages (C.i.) complex script must be installed separately.
  
  If you will not be able to see the Chinese characters, unless you install far East support.
  
  Otherwise, you will need to use another computer.