Cannot download the image of DB in forms 10g with webutility

Similar Questions

• Cannot download the image of the camera to the computer

  original title: Sakar 26480 Aqua shooting underwater digital camera 0.3mp

  I have downloaded the driver on the manufacturer's Web site and I still can't get the pics off the camera

  I need help, my son took pictures on vacation and I would see them.

  Many times you don't need drivers.  The camera will appear as a memory device USB.  You can simply open in WIndows Explorer and copy the images to your hard drive.

• AIP - SSM recreate the image in secondary ASA 5500 (failover) with virtual contexts

  Hello guys,.

  The scenario is as follows:

  2 ASA 5500 with virtual contexts for failover.

  The ASA elementary school has the work of the AIP-SSM20.

  ASA school (which is in active / standby) has its SSM20 AIP to work now and everything is in production.

  Someone tried to configure this 2nd AIP - SSM, changed the password and lost, so I tried to re - the image (without authorized passage recovery), but the connection fails on the TFTP server, where is the image of the AIP - SSM.

  Now questions, documentation Cisco re-imaging view orders under ASA #.

  but as this scenario has several virtual contexts the ASA # shell contains no IP address as you know (which I suppose is the reason why the ASA cannot download the image from the TFTP server) and switch to another context (ASA / admin #) re-imaging commands do not work (hw-module module 1... etc...).

  What is the solution? Is there documentation for it (with security contexts)?

  Thank you very much for reading ;) comment on possible solutions.

  Yes,

  Some things to keep in mind.

  (1) run 'debug module start' on the SAA before running the command "hw-module module 1 recover boot. This will show you the ROMMON of the MSS output as it tries to make the new image and you can look for any errors.

  (2) before trying to download from the SSM, first use a machine separate download tftp from your laptop. This will ensure the TFTP on your laptop works and confirm what directory (if any) that you can use as the file location.

  (3) if the tftp download does not SSM, then the SSM is unable to properly connect to your laptop. You need a crossover cable to connect your laptop to the SSM. If you have a crossover cable, then you could try to connect the MSS and your laptop to a small hub, or configure a new vlan on your switch with only 2 ports and connect the MSS and your computer laptop this vlan 2 port.

  (4) also try the download first at the end of the gateway to 0.0.0.0 since your laptop and the SSM will be on the same subnet. If this does not work then you can try a non-existent 30.0.0.4 address as gateway.

  (5) understand that the IP address that you specify for the MSS using the command "configure the hw-module module 1 recover" is just temporary for download. Once an image is installed, then sitting at the module and run the "setup" command in order to configure the permanent address you want ure on external port of the SSM. This address in the "setup" command can the same as that used in the command 'get the 1 hw-module module configure' or a completely new (as in your case). Just make sure that you connect to the network just to what address you give.

• Download the image to the directory and database of the same form data

  Hi all
  
  I play to build a shopping cart (never done before) a tutorial of Gordon Knapp at www.webthang.com.
  
  I created the site and it works perfectly. Now, I want to extend it.
  
  There is a form that allows the user to add data to the database. I would also like to be able to transfer an image to a directory on the server and add the data to the database at the same time of the same shape. It would be good if the input field "< input name ="product_picture"type ="text"id ="product_picture"tabindex ="6"size ="50"/ >" could be filled automatically by the file name of the image being downloaded, but it's not a neccessity.
  
  I looked at different packages ASP Upload and I can upload a single image, but none of them clearly show how to download the image and add data to the database at the same time.
  
  It is a private project I need suggestions for free.
  
  The tutorial shows how to create Dev Ultra site but works perfectly well in DW. The page looks like this. It is named "admin_add.asp":
  
  "< %@LANGUAGE="VBSCRIPT "CODEPAGE ="65001"% >
  "" <!-#include = file '... / Connections/con_ecom.asp "-->
  < %
  Dim MM_editAction
  MM_editAction = CStr (Request.ServerVariables ("SCRIPT_NAME"))
  If (Request.QueryString <>"") then
  MM_editAction = MM_editAction & "?" & Server.HTMLEncode (Request.QueryString)
  End If
  
  'boolean to abandon a record edition.
  Dim MM_abortEdit
  MM_abortEdit = false
  % >
  < %
  "Implementation of the IIR.
  Function MM_IIf (condition, ifTrue or ifFalse)
  If condition = "" then
  IfFalse = MM_IIf
  On the other
  IfTrue = MM_IIf
  End If
  End Function
  % >
  < %
  If (CStr (Request ("MM_insert")) = "add_form") then
  If (not MM_abortEdit) then
  'execute the insert.
  Dim MM_editCmd
  
  Set MM_editCmd = Server.CreateObject ("ADODB.Command")
  MM_editCmd.ActiveConnection = MM_con_ecom_STRING
  MM_editCmd.CommandText = "INSERT INTO products (product_category product_name, product_price, product_briefdesc, product_fulldesc, product_picture) VALUES (?,?,?,?,?,?)".
  MM_editCmd.prepared = true
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param1", 202, 1, 50, Request.Form ("product_category")) ' adVarWChar
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param2", 202, 1, 50, Request.Form ("product_name")) ' adVarWChar
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param3", 5, 1, -1, MM_IIF (Request.Form ("product_price"), Request.Form ("product_price"), null)) ' adDouble
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param4", 203, 1, 536870910, Request.Form ("product_briefdesc")) ' adLongVarWChar
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param5", 203, 1, 536870910, Request.Form ("product_fulldesc")) ' adLongVarWChar
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param6", 202, 1, 50, Request.Form ("product_picture")) ' adVarWChar
  MM_editCmd.execute
  MM_editCmd.ActiveConnection.close
  
  ' add the query string to the redirect URL
  Dim MM_editRedirectUrl
  MM_editRedirectUrl = "admin_control.asp".
  If (Request.QueryString <>"") then
  If (InStr (1, MM_editRedirectUrl, "?", vbTextCompare in) = 0) then
  MM_editRedirectUrl = MM_editRedirectUrl & "?" & Request.QueryString
  On the other
  MM_editRedirectUrl = MM_editRedirectUrl & "" & Request.QueryString
  End If
  End If
  Response.Redirect (MM_editRedirectUrl)
  End If
  End If
  % >
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".
  " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ".
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Administration - add a < /title > product
  "" < link href = "... / scripts/admin.css" rel = "stylesheet" type = "text/css" / >
  "< script type =" text/javascript"src ="... / scripts/ecom.js "> < / script >"
  < / head >
  
  < body onLoad = "adminTitle ()" >
  < div id = 'wrapper' >
  
  < div id = "pageHeading" > ADMINISTRATION - add a PRODUCT < / div >
  
  < div id = "navBar" > < a href = "admin_control.asp" > < /a > control | " Add | < a href = "admin_view.asp" > view < /a > | < a href = "admin_update1.asp" > update < /a > | < a href = "admin_delete1.asp" > delete < /a > | "" < a href = "... / Default.asp" > shop < /a > < / div >
  
  < br / >
  
  < name of the form = "add_form" id = "add_form" method = "POST" action = "< % = MM_editAction % >" >
  < table border = "1" align = "center" id = "tblArea" >
  < b >
  < class td = "tdLabel" > < table > product category
  < td colspan = "2" > < input name = "product_category" type = "text" id = "product_category" tabindex = "1" size = "50" / > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > Product Name < table >
  < td colspan = "2" > < input name = 'product_name' type = 'text' id = 'product_name' tabindex = "2" size = "50" / > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > < table > product price
  < class td = "tdContent" colspan = "2" > < input type = "text" name = "product_price" id = "product_price" tabindex = "3" size = "50" / > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > product short Description < table >
  < class td = "tdContent" colspan = "2" > < textarea name = "product_briefdesc" id = "product_briefdesc" cols = "47" lines = "4" tabindex = "4" > < / textarea > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > full < table > Product Description
  < class td = "tdContent" colspan = "2" > < textarea name = "product_fulldesc" id = "product_fulldesc" cols = "47" rows = "5" tabindex = "5" > < / textarea > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > < table > product Image file name
  < class td = "tdContent" colspan = "2" > < input name = "product_picture" type = "text" id = "product_picture" tabindex = "6" size = "50" / > < table >
  < /tr >
  < b >
  < class td = "tdLabel" > < table >
  < td align = "center" > < input type = "reset" name = "Reset" id = "Reset" value = "Reset form" / > < table >
  < td align = "center" > < input type = "submit" name = "Submit" id = "Submit" value = "Add to the shop" / > < table >
  < /tr >
  < /table >
  < input type = "hidden" name = "MM_insert" value = "add_form" / >
  < / make >
  
  < / div >
  < / body >
  < / html >
  
  Hope you can help.
  
  Best regards
  
  Martin

  Have sorted it.

  Found an excellent tutorial to Webthang.

  http://www.webthang.co.UK/Tuts/tuts_dmx/rob15/rob15.asp

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• can we get the name of the image before you download the image?

  Hi all

  I have image download in my application.

  Problem is that the user can download the image with the same name several times.

  Can we get the name of the image before upload? I think that we cannot name before downloading.

  I have here a way to get the name of the image before upload?

  Chavigny hi...

  In some cases of fileReferance you can get the name.

  link will help you.

  http://livedocs.Adobe.com/Flex/3/langref/Flash/NET/FileReference.html#propertySummary

  Thank you

  Vikram

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• Cannot download the VALID module

  Cannot download the VALID module.
  It stops at the 'Validation' process without messages and errors.

  You need to take this with the forum of modules.

  • https://forums.Mozilla.org/addons/

• Cannot download the updates in the App store. The update including minor iTunes and El Capitan.

  Cannot download the updates in the App store. The update including minor iTunes and El Capitan.

  It's a shame, but without more information, we cannot be of any help.

• HP PAVILION NOTEBOOK PC G7: How can I download the driver hp Pavilion notebook form g7 graphics radeon on processor intel

  someone can tell me, how can I download the driver hp Pavilion notebook form g7 graphics radeon on processor intel

  Hello

  What is your Pavilion G7? Please follow the instructions below to find the product/model of your machine:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Loading/downloading the images from the camera

  I downloaded the images from the camera to the computer, then accidentally deleted from the memory card.  Move them back to the memory card?

  I downloaded the images from the camera to the computer, then accidentally deleted from the memory card.  Move them back to the memory card?

  =====================================================
  FWIW... this task is easier to do than to explain.

  (1) connect the camera via a USB cable and turn it on... or insert the memory card in
  your Media Player.

  (2) go to... Start / my computer... your camera should be attached to a drive letter.
  The reader should be recognized as one or several removable disks... it can
  have several drive letters.

  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  Left 3) click on drive letters... When you identify the drive letter for the camera or
  Media Player... (it will be one that does not launch a dialog box indicating:)
  Please insert a disc in the drive?) ...

  Follow these steps...

  4) navigate to the folder in which the photos are... Open it and go... Edition/select all... good
  Click the group selected (highlighted), then from the menu choose... Send to /.
  Removable disk?

  Only a limited number of files can be copied to the root directory of the card... if you
  Transfer lots of pictures... they must be in one or more folders.

  If these files have been changed in any way, rename, rotate, changing the brightness...
  No matter what... the camera will recognize them is no longer, but they will always be on the map
  If you want to use as a backup. You can click on the left to see what is on the drive letter
  the map.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot download the latest SDK WebWorks (2.1)

  Cannot download the latest SDK WebWorks (2.1)

  After I click on "Download Blackberry Webworks SDK for Tablet OS for Windows" on the next page

  http://us.BlackBerry.com/developers/Tablet/WebWorks.jsp

  the Web page appears to be stuck, "Blackberry Developer Zone Loading" screen... »

  It seems to navigate between index.jsp and SWDLRegistration... pages

  I tried this from Chrome and IE.

  A little frustrating because I need to install a new debugging since the old token has expired and can not get the latest version of the SDK

  OB.

  YES he got working 2 hours ago. Could not download 2 days - tried different browsers and different PCs / networks at home and work.

  Anyway, finally got it work on Firefox with my disabled Proxy.

  Guess it could be related to the:

  -specific browser

  -the proxy settings

  -security settings (e.g. cookies)

  Tried on different networks (work and home).

  different browsers (Chrome, Opera, IE) without success.

  Not sure if I had turned off before proxy.

  Hope that points you in the right direction.

  . H

• How to download the image of the device using javascript

  Hi all

  I developed the web application. In I want to download the image in the folder in my possible device.if blackberry please give the code for me. Thanks in advance...

  Kind regards

  Marimuthu_P

  I did it with PhoneGap and their API FileTransfer long ago.

  I think he uses XHR - here's a great article on how to do several things with XHR and HTML5: http://www.html5rocks.com/en/tutorials/file/xhr2/

• How to download the image to the server

  Hi all
  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE v4.7

  3. the request is:

  In my application I have to download the image to the server.

  How to upload photos to my Simulator server.
  For the download, I need to write script server-side?

  any body can help me on this.

  Thanks in advance

  Abreu - Bureddy

  See this article.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=17169&view=by_date...