cannot drag the video image on the monitor source on timeline

Similar Questions

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Cannot use the timecode source in my project?

  I do not properly understand that Premiere Pro that you cannot use the timecode source in your project? I know that I can change the BEGINNING of t - c in a clip, but I need to read it off the camera (XDCAM EX3)? And if indeed I can't use source t/c - WHY NOT? My files audio syc'ed must be Sync manually!

  Thanks for a reply Adobe

  You can read the timecode source of your clips in several locations within Premiere Pro.

  If you load the clip from the source to the source monitor, don't you see the time code of the displayed item?

  Where you are waiting to see the timecode and don't see it?

  MtD

• You can activate the monitor source upside down?

  We shoot a lot to the gimbal. Upright, you have images upside down. Our eyes and brain are crazy. Is it possible to pass the images in the monitor source of upside down to normal?

  Use the master Clip (vertical flip and horizontal flip).

  Adobe Premiere Pro help. Master Clip effects

• View of ExternalMonitor of the 'monitor Source' to "The program monitor" switch?

  It worked well in CS6, but I went to first CC and my external monitor is displayed the contents of the 'monitor Source' of first only, not "the program monitor. When the monitor of the timeline or program is selected, the extrenal monitor is black. But slecting monitor Source plays very well on the moitor extrenal (via SDI connection)

  How to switch to display the signal from the program monitor my external monitor rather than the Source monitor?

  Configuration of the Tech: using Blackmagic ultrastudio mini monitor to send the SDI signal. Installing the latest driver for the Blackmagic ultrastudio, approved for Adobe CC everything works perfectly in first CS6, it is a question within the first CC.

  Thank you!

  Change the fields option in the settings of the sequence to 'No fields (progressive scan)' fixed.

  Thank you!!!

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• Cannot drag the DataObject to the human task

  why I can't drag the dataobject object to set the parameters of the human task?

  In the control panel to create a human task,.

  Press the + and in the data to find object window I drag my data object to the human task pane

  He organizers can't work, task human Panel cannot receive the value of what I move to traverse it, window of the data object.

  Anyone know?

  If you plan use JDeveloper with Oracle BPM, you will need to get the JDK 1.6.

  Are you asking how to make JDK once JDeveloper has already been installed?  Instead of find all the configuration files that JDeveloper uses to identify the JDK, it will use, in my opinion, the best, safest and fastest by far is to simply reinstall 11.1.1.7.

  When you reinstall, be

  1. use the JDK that is bundled with JDeveloper (JDK 1.6.0_24) by selecting the 'Complete' installation or
  2. Download and install a 1.6.0_24 + JDK and then reinstall JDeveloper by selecting installation "Custom"->, uncheck the JDK group check box and select the "Browse" button to find and select the JDK 1.6 you have installed

  Dan

• trying to install Firefox 5 on Mac iBook, but cannot drag the icon in the folder because I have "insufficient privileges". What... ?

  Try to install Firefox on a Mac iBook G4 v5, I like by dragging the icon in the folder stage I' not sufficient privileges. "I have to uninstall and reinstal a clean in order to update version... ?

  Firefox 5 requires at least OS X 10.5 and an Intel Mac. There is a third part of Firefox 5 version that works under OS X 10.4/10.5 and PPC Macs, for details, see http://www.floodgap.com/software/tenfourfox

  If you prefer, you can get the latest version of Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

• Cannot drag the Insert menu to a toolbar

  Hello

  I've updated DW to the latest version of yesterday. One of the features I've used a lot in previous versions was the horizontal Insert menu. I looked at it add, found this article: CC Dreamweaver: restore classic insertion bar and I found a similar article on the Adobe site but I am not able to drag the menu at all, DW is letting me slide.

  Can one let me know how to get it?

  PVII article is perfect! If you followed it exactly, there should be no problem.

• Cannot drag the item

  Hello

  There is a screenshot of my project above. I am trying to drag the rectangle, but I can't. Can someone tell me where I can be wrong? BTW, I'm hanging out with this plugin: touchpunch.furf.com

  

  You don't need yepnope with version 3 to animate. Use the script loading.

  See my example here:

  https://app.box.com/s/uj6ihft6kd0pqgc8h5sc

• all the buttons work only not on the monitor source except the space bar

  I just downloaded a trial of adobe first cc 2015 but unable to do all the regular stuff in my source window. all buttons are unresponsive except the space bar (it will play the file). I can also drag the video in the timeline, but still unable to make other edits using the buttons... any ideas anyone?

  Try this:

  Restart your computer, hold down the shift + alt key while opening the first up to the Welcome screen.

• Cannot be the main source of switch - SX80

  Need to switch the main source for video playback instead of send as content. Have several SX-80 s. Some, I am able to switch the main source to the PC Input or camera 2 without problem, others, nothing. I can even see in the preview window for main Source on the page of call control that switches the source, but it does switch not actually for the ends either near or far. I can send any source through the content, but not through primary source. Works and does not work for several versions of software.

  There is a bug that prevents you from changing sources using the web interface call control page, see CSCva64137.  It has fixed in TC7.3.7 and CE8.2.2, which just came out today, Oct. 5.

  Have you considered changing the quality of the input content 'Motion', which gives the highest frame rate possible at the cost of higher resolution.  The default value is 'Sharpness', which gives the highest resolution at the expense of speed.

  Quality of video input connector [1.5]

• OBIEE Mapviewer 11.1.1.7.1 cannot change the data source

  Hi all

  I am trying to configure mapviewer on our environment and after

  by clicking on configuration

  Add the DB details

  Save & Restart is updated the file xml but not displayed on the data source tab.

  But where as the other details of DB, I am able to add without problem, then if I click on change by selecting the data source to add/edit the details required to DB I get following error.

  Source of data editing is not yet supported. However, you can delete and re-create it with the new settings.

  and on the Management tab is not showing me any option to add the new source of data manually.

  someone has encountered this problem before. TIA

  Maybe the connection details are wrong, you see something in the Map Viewer logs files?

  under FMW_HOME/Oracle_BI1/bifoundation/jee/mapviewer.ear/web.war/WEB-INF/log/mapviewer.log

• Cannot create the data source in console (Linux) wls XE db (windows)

  Hi all
  I use Linux5 for 11.1.1.1.4 soa deployments, I'm unable to create the data source in WLS of XE database that runs in win7, I'm getting below error.
  did I do it properly or it is not possible? When connecting with db XE which runs on Linux, I am able to connect.
  
  
  -Error connection failed test.
  -Error IO error: the network adapter could not establish the connection
  oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
  oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:670)
  oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:230)
  oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
  oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
  oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
  oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
  com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
  com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
  sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  java.lang.reflect.Method.invoke(Method.java:597)
  org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
  org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
  org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
  org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
  org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
  ...
  
  just please give me some resolution.
  
  Concerning
  Shankar

  I noticed that this is a problem with b & w of the VM communication. box of VM workstation vm.

  Thankx
  Siva

• Can not see the text and cannot drag and drop images

  OK well when I insert the text it does not show, but it shows what I wrote on the side. I have contact support their answer was that they cannot help me because I'm the trial verison. I'll just buy a program if the trial version does not work its that simple. Also when I try to drag-and - drop an image a little apears circle with the line through it. I have admin rights.

  Dame143,

  The author of the tutorial is able to use 30pt font because the size of the image is much smaller than yours. Take your image size down to a width of 400 or 500 px by going to Image > Image size.