Cannot execute edit plan reovery, discovers links and run the recovery test

Similar Questions

• Download picture of URL link and store the Image in a Local folder in BB10 Webworks

  Hello

  I want to download the image of URL link and store the image in a local folder in Webworks BB10.
  But I did not get the code for this.

  If such knowledge code or have any solution then please help me...

  Thank you best regards &,.

  Laurent Subudhi

  NitishSubudhi wrote:
  I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

  According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

  To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

  // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
  

  For OS SmartPhone BB the function call looks like this:

  // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
  

  All think that all information provide here, try to follow and cela should operate.

• Buy Acrobat Pro Win ESD through TechSoup XI.  Clicked links and of the steps taken. Problem, he asks us to choose what we want to download, and there are no Acrobat XI Win ESD in the product list. At TechSoup to purchase check. Help?

  Buy Acrobat Pro Win ESD through TechSoup XI.  Clicked links and of the steps taken. Problem, he asks us to choose what we want to download, and there are no Acrobat XI Win ESD in the product list. At TechSoup to purchase check. Help?

  It's... See 11 English Pro (for Windows). Your Dah!

• Start and run the OS from USB Thumb Stick

  Probably seems like a silly question, but we plan to compare the performance of the disks of a set entirely filled with disks (6-3.5) PE2950 with HD Tune. In order to make writing tests, to test disks must be empty which limits the ability to test. The only way to make it work is by using one of the disk for the operating system and the other for all of the r10, which leaves two equation, one for the os and an empty disc and severely restricted the raid10 anyway. I was hoping it might be possible to load windows 2003 on a USB thumb. I am not concerned about the actual performance of the OS, just the ability to load and run the OS tools. Similarly, we can start the server of SAN right now as I have no space free lun I can attribute to this effect.

  Thank you

  
  

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Build and run the illustrator of samples in xcode?

  Hello

  I'm trying to build and run the samples of illustrator using xcode. For that, I am following the steps in the document "getting started with adode Illustrator CC 2015 development", but I'm having a problem in compiling and linking a file 'BuildAll.xcodeproj'. My screen shows me this message:

  «error: there is no SDK with the name or the path "/ users/mbaz/Desktop/Adobe Illustrator CS5 SDK/samplecode/MasterProjects/macosx10.5'"»

  How can I solve this problem?

  Thank you

  The sulution to this problem to just update a pluging.

• Try to download the latest version of Adobe Reader. When I press 'install' and run the download, it tells me to close Internet Explorer. However, I have closed internet Explorer and have no other open programs

  Try to download the latest version of Adobe Reader. When I press 'install' and run the download, it tells me to close Internet Explorer. However, I have closed internet Explorer and have no other open programs

  Hi 2006screenname2006,

  Restart your computer and download & install Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if the problem persists.

  Kind regards

  Nicos

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.

• How to: Download and run the utility of Diagnostic equipment of HP (HDU)

  Hi all

  The video below will show you how to download and run the hardware HP (HDU) diagnostic utility in Windows 7 and Windows Vista (and probably 8 as well). You don't want to use this tool to help you determine if hardware of your printer HP working properly.

  If you have any problems, or simply have questions about the tool, response in this thread.

• Download and run the utility of Diagnostic equipment of HP (HDU)

  Learn how to download and run the hardware HP (HDU) diagnostic utility in Windows 7 and Windows Vista. You don't want to use this tool to help you determine if your HP printer is working properly.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.

• Tried to build and run the "QXmlStreamReader" project, but the display of the device debugging errors] error 2, no rule to make target "main.cpp", need to "debug/main.o.

  I have tried to build and run the project "QXmlStreamReader" with momentics

  but display as errors

  The path location type Resource Description
  make: * [Device-Debug] problem error 2 QXSRExample C/C++
  make [2]: * no rule to make target "main.cpp", need to "debug/main.o.  Stop.    QXSRExample C/C++ problem
  make [1]: * [debug] problem error 2 QXSRExample C/C++

  My project is to

  CBC

  main.cpp

  qxsrexample.cpp

  Inc.

  qxsrexample.h

  assets

  hand. QML etc.

  Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html

  And

  http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt

  I posted a few snippets on the forum some time ago, maybe they are useful:

  https://supportforums.BlackBerry.com/T5/native-development/how-to-parse-XML-data-coming-from-server-...

• Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  3177349 wrote:

  Hi all, I want to know what can I complie forms in windows and run the file met in the other operating system

  It depends only on the BONE of the application server.

  If your OS development and OS is different, you have to compile the fmb in the server again.

  Hamid

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• Help! Went to format my D recovery drive and now the recovery partition is gone!

  Hi everyone, thanks for reading and I would really appreciate the help! I use a HP G32 laptop, Windows 7 operating system. n in the middle of trying to free up space on recovery drive D, I went to the format is gone and now the recovery and empty of my D drive partition! Tried to retrieve the file, but to no avail! No idea what I can do? Thank you very much!!!

  That's what does_removes put in shape all the files. You burn your set of recovery disks? If so, you can start their relocation back to factory specifications that will recreate the recovery partition. Please note that this format the entire hard drive, which means that you save the files, photos, etc. before the race. If you burn your recovery DVD set, that you can order from HP for about $20.