Cannot find a corrupt plist file

Similar Questions

• Cannot find the corrupt configuration file to be recovered.

  I had a similar problem to many people, with my computer telling me that the windows\system32\config\system file is corrupted missing. But after trying the steps on the support page, I got no further than the first step that the files that I need to copy could not be found. I tried to jump to their compensation, but, yet again, as they cannot be found, they cannot be repaired! Don't know what else to try as no command doesn't seem to work with anything whatever in the config folder. Then, try the system restore, but don't even know if it's likely to work?

  Any help would be greatly appreciated!

  The problem is usually a corrupted file system and not a damaged or missing file.  The message means that XP tries to start, but just can't find or get the file.  A chkdsk /r usually clears it right up, but when the mistake of Googling, KB307545 is the first results, so unfortunately, it's where people start sometimes.  KB307545 is a corrupted registry or a file system afflicted.  If the file system is corrupted, you will get frustrated quickly with KB307545.

  KB307545 doesn't really work if you follow the directions exactly and you do not have a problem of file system, but I've never, never, never used to solve the problem you describe because it is usually never really necessary.  Recording file corruption does not usually go to the origin of the error.

  If you want to use KB307545, which is something you would do to get your whole system running long enough to make a 'real' system restore, but only after running a chkdsk/r from the Recovery Console.  There is no such thing as a "restoration of the manual system.  There is a "get my system functional enough to do a regular system restore".  KB307545 and a regular system restore are not interchangeable.  It could also be that your system restore is just totally whacked on too much by train.

  What happens when you try to start your system in Mode safe?  What is the last thing you see on the screen?

  What does ' not loading everything '?

  If you use the Recovery Console to implement the KB307545 and have already tried, name changes will not work until you remove the files target of your previous efforts.

  If you want to rename fileA to fileB, you must first remove the current file (if it exists).  Change of name is not identical to the copy so if the target file already exists, you cannot rename just another file on top of it.  You will get an error message.  You will need to delete the old file first, and then rename.  That is why your worked the first time but not the second time - the file you are trying to rename already exists.  You cannot rename on top of an existing file.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• HP photosmart c4580 program cannot find the installation 7zs7e9a file

  HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

  cancellation of the attempt to install the software will run without problem.

  tried to extract files without 7zs7e9a file in the temp directory

  all solutions?

  I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

  PS

  OS vista Home premium 64-bit

  Thank you for your quick response

  concerning

  clhxo

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• Where can I find the TextEdit.plist file?

  I find that I close TextEdit by Force to quit smoking!

  Where can I find the TextEdit.plist file?

  Thank you for your help.

  Hi Walter, ~ / Library/Preferences/com.apple.TextEdit.plist.

  If your library is hidden in Finder 'Go' menu 'Go to folder' enter the path in the text box that appears and press return.

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Cannot find the config.xml file

  Hi all

  I searched the forum and google my problem with no luck.  I hope someone here can help me.

  On my Windows XP VM, I try to use Packager WebWorks to compile a file to archive.  Whenever I do, I get "archive invalid - cannot find the file config.xml.  Of course, my zip file has a config.xml file.

  While trying to fix it myself, I downloaded the sketchpadStandard.zip of the sample and could only compile without error.  I extracted the file and re-compressed it and got the error "cannot find the config.xml file.  I used the utility of windows XP, I downloaded winzip and used this utility, I used my mac to compress the file.  Whenever * I * do, I get the error.

  Obviously, package manager works, and I'm in the right directory that I'm able to compile the provided sample Archives, but why the hell can not compile the VERY SAME FILES I checked myself?

  Any thoughts much appreciated.

  After several hours of experimentation, I finally load the mac version of the SDK directly on my mac, rather than the version of windows on my virtual Windows machine.  I did the fix here would solve the same problem on a mac and it worked.

• BlackBerry Smartphones Runtime error "Cannot find system in the file table.

  I need help!

  I have a Blackberry Curve 8310 and have recently installed Version 4.5

  I'm trying to set my synchronization.  I followed the steps to set up my Outlook 2007 calendar.  He told me congratulations! You have configured the product. However, when I press Finish, I get a runtime error "cannot find system in the file table.

  I uninstalled the program and reinstalled - the same error.

  Any help would be appreciated!

  FIGURED IT OUT!

  The following steps, which are displayed on the RIM support will work; However, I had to do it another way.  In step 1, it says that ilxolkCompanion.fil is located in the path C:\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector... However, when I searched this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (Maybe it's because I upgraded from 4.2.2 to 4.5 w/o filling a clean uninstall... not too sure why)

  Once I located the file via the command prompt, I have not recorded in accordance with the instructions of step 1.  I then followed step 2 exactly Word for Word... and VOILA!  I have now Version 4.5, working with MS Outlook 2007

  Resolution

  If the connectors folder is always present in C\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:

  1. Unregister the old of the Microsoft Outlook ilxolkCompanion.filconnector.
     1. Open the command prompt.
     2. Navigate to C:\Program research in Motion\BlackBerry\Connectors\MS Outlook Connector.
     3. Type command regsvr32 u ilxolkCompanion.fil.
     4. In Desktop Manager, Microsoft Outlook is no longer appears as an available desktop application.
  2. Save the latest Microsoft Outlook Connector.
     1. Navigate to C:\Program research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
     2. Type the command regsvr32 msoutlookconnector.fil.
     3. Office Manager, Microsoft Outlook will be now stored as an available desktop application.

  Once these steps have been completed, configure synchronization again.

• Cannot find the overall messages file - db.sqlite

  Hi, volunteers! Thank you for being here.

  The search function of Thunderbird has stopped working. He cannot find all - regardless of the query returned no results.

  I understand that I need to rebuild the global database to correct this and have read the instructions here:

  https://support.Mozilla.org/en-us/KB/rebuilding-global-database

  He tells me to delete my profile from TB global-messages - db.sqlite. Connects me to another page on how to find this profile. I followed these instructions:

  "How to find your profile.

     Click on the menu button or menu bar.
     From the Help menu, click Troubleshooting Information.
     In the Application Basics section, Profile Folder, click on Show in Finder.
     The Mac Finder window will show the name of the profile as well as the path to it."
  

  The finder window shows me this file: zfrnv9to.default - 1445806062498. Nothing inside it looks like the file I'm supposed to delete, which is global-messages - db.sqlite.

  I also used the Mac projector for a search on "global-messages - db.sqlite. He cannot find anything like this on my Mac Air (which is running El Capitan). It is usually pretty reliable to dig up files, but - no luck.

  What should I do now?

  Zenos, thank you! I solved this on my own last night.

  In case it helps the next person: I re-read the page of Mozilla to find the file.

  So, rather than looking in the Application databases, I dug through my files user myself, using the information that it would be under User/Library etc.

  It took a few minutes of poking around to find it. I deleted it, restarted TB, and the search function is back.

  The mystery that I can't solve it is why the recommended method or research Spotlight of the CMA does not find it in the first place. But with time and patience, the manual search does the job.

  Thanks for the tips, the time and help!

• Error 1714 cannot find the vcredist.msi file when trying to install Visual c ++ 2005 Service Pack.

  Original title: pack visual c ++ 2005 service cannot download.

  Error 1714 in case of failure of the daily requests to download Visual c ++ 2005 Service Pack.

  "cannot find file vcredist.msi.

  Hi ElizabethAustin,

  1. are you able to correctly install the other updates?

  2. What is the update's KB number?

  You can follow the suggestion of measures in this link & check if the problem persists:

  Visual C++ 2005 Redistributable error 1714

  Reference: How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues

  Hope the helps of information.

• Invalid application - cannot find the config.xml file archive

  I'm new to webworks development... I created a sample config.xml and index.html in the folder Helloworld and made a Zip file...

  Then using ripple I packed up the app and the. Cod files are generated correctly...

  But I was not able to pack and sign using ripple, if I had the signature keys added to the bin folder of the SDK correctly...

  So I tried bbwp command line argument to achieve the same... But it has ended up with the error "Invalid application archive - cannot find the file config.xml.

  What is the problem that I do with the archieve file?

  How to use eclipse for development for the Webworks 2.3.1.5 sdk?

  My guess is that you have a HelloWorld inside your zip file and the file config.xml and index.html are inside this folder. The config.xml file must be in the root and must reference the index.html file, wherever it is in the zip directory structure.

• 'Adobe CFC Generator' error 'cannot find the ide_config.xml file.

  Hello

  Yesterday, I downloaded a CF Builder 2 trial. I have install in my machine I am running CF 9.01 Dev version.

  When I try install 'Adobe CFC Generator"extension"cannot find ide_config.xml file.

  I'm trying to find a solution. but I just can't.

  Some ideas thank you!

  With ColdFusion Builder 2, a generator of CFCS should be deleted. However, by mistake, CFC generator has been removed only partially.

  If you want to use:

  Plesae download it from: http://adobecfcgenerator.riaforge.org/

  Or if you have a ColdFusion Builder 1 or ColdFusion Builder Beta 2 installation:

  You can take it from \extensions and deploy on your server instead of using the installed incorrectl CFC generator.

  Thank you

  Krishna

• Cannot find the locale data files. Please reinstall

  I had a problem with Google Chrome, so I uninstalled via the control panel. I then reinstalled and I have this problem. I always present in my programs in the watched folder, but when I select to demolished, he said ' wait until the current program has finished install or changing.» I have no other program install or change. If I try to open Google, anywhere Progams, taskbar, all programs or directly from the .exe LocalApps it gives me the "could not find the locale data files. Please reinstall.

  I found the answer to my question. It seems that you can build processes, I don't understand why. For example I had a problem with my windows Explorer crashing. I disabled all the startup process of msconfig.

  In my view, there must be something in there that closes a completed process.
  Then I had, unknown to me, when I posted this problem, six or seven cases Google chrome showing the the Task Manager process tab. When I quit all instances of Google, I was able to finish the removal process and re - install Google Chrome.
  I just checked right now and I have six Google shown 3 rundll32.exe and two taskeng.exe bodies. I've never seen no more than one instance of anything in this tab before today.
  Disabling all startup stuff does not solve my problem to explore some way so I'll allow them once again.
  Thank you for helping me and I hope that someone can get useful information from my travels.

• Cannot find my index.html file after uploading via FTP to my Web host. Where is this?

  Hi, I am trying to locate the index.html file that muse creates after downloading from my webhost via FTP, but I can't seem to locate it. No one knows where that might be, or is Muse for something different then index.html?

  Thank you!

  Brad, I came across this thread, trying to find my index.html file: https://forums.adobe.com/message/7047367#7047367

  The suggestion to disable editing in the browser and re - download my site again, the file index.html returned (and replace the index.php file that was there).

  I always find it strange that the php file was created (not knowing code, I'm sure there's a good explanation for this). However, the only reason why I even noticed there was a problem of not having an index.html file, is that I'm currently testing a new Web host (Media Temple Grid) - and the index.html file was needed. It doesn't seem to work properly with the .php file. Which brings me to wonder... If, for example, I would need to have access to this feature of change in the browser in the future, is there a way to ensure that the index.php file is compatible with my new host?

  Thank you!