To connect to the data several times store

Similar Questions

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• Camcorder Camileo P100 store the date and time

  My recently purchased camcorder camileo P100 store the date and time.
  Whenever it starts it must be reset because it refers to the default date.

  Has anyone else had this problem

  It looks like a camera malfunction don t think you can fix it.
  I suggest you to get in touch with the dealer and replace the cam

• Must DSL be connected all the time to the date and time of synchronization?

  Sometimes I disconnect my DSL lines in case of bad weather.  What's causing my date and time on the computer clock to stop?  I have not had this problem before and have disconnected the front DSL.  If this could have something to do with a switch recently to Security Essentials?

  Sometimes I disconnect my DSL lines in case of bad weather.  What's causing my date and time on the computer clock to stop?  I have not had this problem before and have disconnected the front DSL.  If this could have something to do with a switch recently to Security Essentials?

  Disconnect it won't cause the date and time to stop, but it will not synchronize the period that it is disconnected.

  In addition, please note that diconnecting just the telephone line during bad weather is not enough. If you want to protect you during storms (other types of weather do not require protection), you should unplug both the phone line * and * power cord. Be possible to route a severe surge suddenly lightning nearby for your computer

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• How can I get the date and time function to appear as a tile

  How can I get the date and time function to appear as a tile

  How can I get the date and time function to appear as a tile

  WIN8 are delivered with this tile/app.  The only way to display the time is to launch the charm bar (Win - key + C) or mouse over to the right up/down.  That said go to the Windows store... There are several free applications that display the time / date as a live tile.  Good luck.

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• Add the date and time to a photo

  How to add the date and time to a photo or contact sheet in OS X El captain?

  KADRI

  Christiana

  You want to write the date and time in the photo?

  You need to do it in an external editor.  Photos can't.

  You can print the date and time and other legends on a Board-contact, however.  When you select a photo and then use the model of the "Contact Sheet", you can click the 'Captions' button and select the metadata to use as the legend on the contact sheet.

  

  To write directly to the photo, you can use the Preview.app.

  Export the photo to go to Photos and then open it in preview or install the extension of"external editors" of the App Store. Then you can open preview directly from the Panel of editing in Photos.  See this tip for user: external photo editors are here

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• E-mail messages are placed in the basket several times every minute during the strike.

  E-mail messages are placed in the basket several times (every minutes) while I'm typing / dial.  I didn't until I visited my trash to remember something. How do I get this stopped?

  From the Mail menu bar, you select

  ▹ mail preferences... ▹ Accounts ▹ behaviors of the ball

  and uncheck the box marked

  Store drafts on the server

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• How to set the date and time in eAiO Officejet Pro 8600?

  The printer is connected with the USB cable and the date & time display zeros. I wasn't able to find a menu option for date & time setting in the printer Panel. The user guide mentions nothing about it. How can I configure date and time?

  Hi Exxpert,

  Here is a tutorial from HP on how to set up this printer, scroll all the way down to step 9 for the date and time.

  Configuration printer Officejet Pro 8600

  I hope this helps!

• I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and above all my desktop icons change adobe logo, so when I click on them Adobe tries to open them.

  I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...

  This may help: Application, file icons change in Acrobat/Reader icon