Cannot find application SOA model

Similar Questions

• Siri cannot find applications or play music

  Just upgraded to the 6s and am having some problems with Siri.

  It cannot open one of my apps (more comical, the App Store - see picture attached) or play any of my music. I am able to solve the problem by disabling Siri, restart my phone and then activation Siri yet BUT as soon as I turn on "Hey Siri" back, it plays dumb.

  Can anyone help?

  Thank you

  Toby

  

  Hello tjknight83,

  Thank you for using communities of Apple Support.

  If you have trouble with Siri opening applications, you can take a look at the following article for assistance:

  Use Siri on your iPhone, iPad or iPod touch

  Specifically, the following article:

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • If Siri is not available or responding to questions, see the next section.

  If Siri is not available, or do not understand or answer questions

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  If Siri does not make a noise when you press and hold the Home button

  On your iPad or iPod touch, Siri sounds when it's time to ask a question. If you have an iPhone with iOS 9 or later, Siri begins to vibrate in place. You will hear only the ringtone on your iPhone with iOS 9 or later, when you use headphones.

  Siri also sounds when you use "Hey Siri" on an iOS device 9.

  Best regards.

• Cannot find application in the store

  I am trying to download my football team Hungarian app, but the research says it can't find it, I got the app before, I have it on my ipod, but it can not find for ipad, why?

  He has a very good chance that your application has been removed from the App Store. This can happen for a variety of reasons. What you could try (if you have transferred your applications on your computer) you can install directly on your device.

• Cannot find application loaded on Simulator

  Hi all

  When I try to launch my application with eclipse the Simulator starts, but the application is not running. When I try to load the code from the Simulator itself I have this message in the eclipse console - ' CMM: BBMSDKDemo (3056) exists already, I can't find the app in the Simulator.» Is there anything else I can try?

  I'm using the blackberry Simulator 9800.

  Thank you

  Greetings.

  Try to remove the five files related to said request (.cod, .cls, .cso, .debug and .jar) of your way of Simulator (in my case, 'R:\Eclipse BB 1.3\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\simulator') and run the project again. This will allow eclipse recreate the files again with the new settings and the source code for your project.

  I hope this be useful.

• Cannot find application in app manager to uninstall

  I initially downloaded an application called clock radio.  It didn't keep the screen on which I wanted for a visible clock at night.  So I downloaded "Best alarm" which works very well.

  The problem is that I can't uninstall 'Waking up' because it does not appear in the list of applications in the application manager.  When I opened the Apps drawer he sits there, first of all in my list, but it does not appear in the Appl. Mngr.

  How to kill this thing?

  This phone has a learning curve very attached to her.  We all know.

• Cannot find my driver sony Web site model

  I need to download drivers for my laptop, but cannot very well my model in the list of drivers. And I got the model number on the back of my laptop. It's SVF142C29L. I have buy this mobile in the United States, but still can not find US pages. Do not know why.

  Hello Philip!

  What about the service tag? You are able to provide the serial number? It should also be on a white sticker behind/underneath the laptop. For more information on how to get the name of the Exact model of your laptop. Please see the link I posted earlier.

  ~ Tim

• Model VeriStand compilation error: NEITHER VeriStand 2010 cannot find the struct parameter in CGTypes

  Hello

  I get this sequence of messages when I try to compile a model.

  ...

  # Generating API interface TLC.
  ...........................................................
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.c file
  ...................................
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io_data.c file
  Error: # NOR VeriStand 2010 cannot find the struct parameter in CGTypes
   
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.h file

  # File Readme of Ports generating NI VeriStand 2010
  Could not find c:\WorkDir\Models\Pack\pack_l500_ib_plant_fstep_io_niVeriStand_rtw\*.obj
  # Time real workshop build procedure for model: 'Pack_L500_IB_plant_fstep_io' aborted due to an error.

  I tried to repair my VeriStand 2010 installation and always errors.

  I created a VM, installed Simulink and Veristand and tried to recompile the template. Error appers again.

  I changed the "target system" (tlc file) in general relativity, and the model has been compiled without errors. Same VxWorks Veristand target fails.

  If I copy the other target to target VS the second error le.obj goes but I always "error: # NI VeriStand 2010 unable to find parameter struct in CGTypes.

  How can I solve this problem?

  See you soon,.

  Claudio H.

  Hello

  I found the problem but not the reason.

  If I change the Settings of Configuration > Optimization > Parameters Inline unchecked = the template compiles without problems.

  See you soon,.

  Claudio H.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• TENS of installation in the application directory--> cannot find directory RTE

  Hello

  I couldn't find an answer of fitting about my problem using search, so I'll try my luck by asking.

  First of all: I'm using Labwindows/CVI 8.5

  I created an installer for my application using the Distribution Kit Wizard. Under the tab drivers & components I chose only the 'standard Run-Time'.

  On the Advanced tab, I left the option "Install Labwindos/CVI Run-Time Engine in the application directory" unchecked.

  This installs and works fine at my PC clients.

  Now the problem:

  My client does not want that all files are installed in the Windows\System32 directory...

  So I checked the option "Install Labwindos/CVI Run-Time Engine in the application directory" and created a new installation routine.

  This installs fine and the cvirte folder is also be copied into the directory of the specified program and not Windows\System32... but now whenever my client tries to run the application, it gets called with the following messagebox:

  Cannot find the directory RTE:

  C:\Windows\system32\cvirte

  Which is actually very good, because I wanted to RTE must be installed in the folder of my program, but somehow my request is always pointed toward the search in system32.

  Is there a way to fix this without copying the RTE in Windows\System32 again?

  Given your explanation, I can understand why you see the error message. When you try to locate the resource (bin) and directories of fonts, DLL RTE search in the directory of the process that loaded, then in the system directory. As RTÉ is not installed in one of these locations (instead, it is installed in the same directory as your DLL file), we do not find the directory "RTE". There is nothing particularly wrong with what you're trying to do, except that we can't do well. I'll drop a request to fix this for a future version. In the meantime, you have a few options:

  1. let the RTE to install in the system directory, as it normally would.

  2. manually copy the directory cvirte of your repertoire of the DLL in the system directory.

  3. ask the client install your package DLL in its application directory. The target directory can be changed by the customer at the time of installation.

  I know these aren't the major options. I personally highly recommend the first option, despite protests from your customer. Is there a good reason that it is forbidden to use the system directory?

  A. Mert

  National Instruments

• I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application

  original title: access to Movie Maker

  I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application?

  You are welcome and thank you for the comments.

• installed realplayer and got the message application can not start cannot find the component MSVCP90.dll

  I have my computer with a user account that is not an administrator account. I changed it to an administrator account so I could add realplayer and when finished dwn says loading message cannot start application because cannot find component MSVCP90.dll. what exact location go so that I can install this component.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9b2da534-3e03-4391-8a4d-074b9f2bc1bf

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Signed .bar - cannot find the default application

  Hello

  a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

  I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

  "Cannot find the default application"

  
  I've already put my developer intro PlayBook (OS 2.1) mode.

  How to install the .bar file?

  Thank you.

  Vibes

  You need to side load the folder bar. A lot of discussion on that.

• Cannot sign the application - cannot find the signature key file: author.p12

  Hi all.

  I have seen this error on several messages in the forum, but none of the suggested corrections works for me.

  I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and followed the registration procedure. The author.p12 and other files exist in %HOMEPATH%\AppData\Local\Research In Motion

  However, when I try to run the following commands, it fails. I also tried to use the graphical help of BlackBerry Tablet OS and I get the same error.

  The only thing I noticed is if I run: echo %homepath%, the result is:------. I can't change what I am on Windows 7 on an Active Directory domain and any changes made to these environment variables does not stick.

  Is there a way to specify the path to the author.p12 file? Help, please! The output is below:

  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>bbwp C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\third_party\node\windows\node.exe" "C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\lib\bbwp.js" C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  [BUILD]   Populating application source
  [BUILD]   Parsing config.xml
  [ERROR]   Cannot sign application - failed to find signing key file: author.p12
  

  Thank you.

  Jon

  I corrected myself. I realized all I had to do was to create a local user (no AD) on my machine, copy RIM folder my HOMEPATH to HOMEPATH to the local user, then run cmd.exe as the local user and sign the binary file. Worked fine!

• Invalid application - cannot find the config.xml file archive

  I'm new to webworks development... I created a sample config.xml and index.html in the folder Helloworld and made a Zip file...

  Then using ripple I packed up the app and the. Cod files are generated correctly...

  But I was not able to pack and sign using ripple, if I had the signature keys added to the bin folder of the SDK correctly...

  So I tried bbwp command line argument to achieve the same... But it has ended up with the error "Invalid application archive - cannot find the file config.xml.

  What is the problem that I do with the archieve file?

  How to use eclipse for development for the Webworks 2.3.1.5 sdk?

  My guess is that you have a HelloWorld inside your zip file and the file config.xml and index.html are inside this folder. The config.xml file must be in the root and must reference the index.html file, wherever it is in the zip directory structure.