Cannot get CS4 to start after change of disc
I changed boot drive on my macbook pro running OS x 10.9 to an ssd.
Since then, I can't start CS4 and he says has only licenses.
I had this once before a few years back when I had a disc problem and had to restore from a backup and I used the license recovery tool and managed to make it work. This time, I tried all the steps on the doc of recovery and the tool and still does not work. Maybe something to 10.9 of Mac OS x.
I talked to customer support and they say that they do not support for older products and suggest I go on forums or buy the latest version of product!
I have the serial number, but I don't have the software cd. I didn't think that I should be with backups etc..
I not even looked to see if the old version of CS4 free trial was available but the link on adobe prodesigntools site does not work either, so I guess that which was removed.
Can someone advise please because he is really stuck now?
I have still the old drive internal that I could boot from, but if I do that is there then a way to do something for transfer to the new player so he can work on there etc?
Thank you
Mike
If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate it with your serial number.
If you have a problem downloading, you follow the 7 steps, or your browser accepts no cookies.
the most common problem is caused by the failure of meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com
Tags: Adobe
Similar Questions
-
Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".
If Win 7-64 don't update the hardware changes and this prevents the start.
Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?
Hello
As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed
Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows
http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7
Note: data loss caveat:
Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.
Thank you
Er.Mayank Chadha
Thanks for your response
I solved this problem in BIOS Advanced\SATA config\SB SATA config. as follows
SATA port 1-4 = AHCI initially
SATA port 1-4 = new IDE
SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4
This because I've done a typical mistake of mine. I did not save the configuration with the entry of FDI
Good bye
Huemul
-
I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
-
Pavilion dm3-2020eo does not start after change of RAM
As the topic says my computer does not start after a change of the RAM.
I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.
According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.
Can someone help me?
Thank you
LeoHere's the key:
We're working on two sockets and one does not at all.
You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.
-
Service does not start after change of IP address on the server of SRM
Here is the log. The IP address has been changed, but I don't know how to take the side of MRS.?
Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option
Cannot create the writer console
Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"
The initialization of the DBManager
Current working directory: C:\Program VMware Site Recovery Manager\bin
TaskMax = 10, IoMin = 1, IoMax = 21
Plugin path 0: dr-external-recovery - api dll
Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll
Plugin path 1: dr-secondary - recovery.dll
Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll
Plugin path 2: dr - san - provider.dll
Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll
Plugin 3 path: dr-test - provider.dll
Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll
DrExtApi Instance of Service is initialized.
'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.
Registered provider 'SanProvider '.
'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.
Registered provider 'SanProvider '.
' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.
Registered provider 'TestProvider '.
' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.
Registered provider 'TestProvider '.
LocalSite already installed - good!
Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000
VC connection: connection as the user "administrator."
VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933
The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host
Check with the local VC server is not valid
Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid
Application error: check with local VC server is not valid. Closing...
Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)
Z OS
I tried this on my own server and that you couldn't make it work. I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway. Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.
-
Satellite Pro L40 does not start after changing the BIOS settings
Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.
There is no password on the bios... How would a BIOS reset to normal?
I put a windows disc now, I hear the disc spin but nothing on the screen
(I think that I have come to the right place on the forum)
It s a Toshiba Satellite Pro L40 model psl4be.
Thank you
> There was no bios password... How would a BIOS reset to normal?
You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order
But I doubt that this problem is related to the BIOS.
Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.Try connecting an external monitor and check if you can see something on the 2nd screen.
-
Cannot get on my computer after you turn off FileVault
I can't get on my computer after you turn off FileVault. After reboot, he asked my name and my password. It didn't work and now I'm stuck at the connection. What should I do? The computer is new and I had nothing recorded on it.
Reboot into recovery (command-R) Mode. Then use disk utility to ERASE the drive. Select the top reader of the page entry and select Delete. This will erase, reformat, and create a single partition. Close disk utility, then select reinstall OS X OS X Utilities menu.
-
Can't get Firefox to start after OS updates
Just did the latest updates on OS - X 10.6.8 and now I can't get Firefox to start. He stands up and says he has problems (the 'annoying' window) and that I should try to close tabs. However, it does not at all, so finally I have to force quit. I try cold start the computer without effect.
We will try this. You said that you try to start Firefox 8 on the problem machine? Can you try to download Firefox www.getfirefox.com11, install it, restart your computer, and then see if it is still upward?
If this is the case, try to start Firefox in safe mode.
-
Cannot get my sync data after the reset password
Greetings,
I have reinstalled the OS on my laptop and tried to Resync all my favorites etc. Last time I did this, it was no problem. However, this time, it would not accept my password for some reason any. It kept showing me "password incorrect" even if the password was correct. I had to reset my pass and after that I do not seem to have my data synchronized back. How can I solve this problem and get everything I need again?
Thanks in advance.The synchronization service uses a synchronization key to encrypt the data locally before you download
This sync key is generated internally from the password of your account from Firefox, you need not worry about this.
Without the password, it is not possible to decrypt the data stored on the server, because the good sync key cannot be generated.
This synchronization key changes when you change the password of the Firefox account and you will lose all data stored on the server when you change the password of the account synchronization. -
OptiPlex 755 USFF does not start after changing the cmos battery
I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.
I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.
Any help would be appreciated.
After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.
-
Database won't start after change of NLS_Language
Hi guys :)
I changed my NLS_Language to ' HEBREW_ISRAEL. IW8MSWIN1255' and since then I can not start my DB.
I always get: ORA-12700: invalid value of the parameter NLS (nls_language)
This command to do: alter system set nls_language = ' HEBREW_ISRAEL. IW8MSWIN1255' SCOPE = SPFILE;
My NLS_Language before I changed it was:
SYS > select * from v$ nls_parameters
2;
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_LANGUAGE
AMERICAN
NLS_TERRITORY
AMERICA
NLS_CURRENCY
$
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_ISO_CURRENCY
AMERICA
NLS_NUMERIC_CHARACTERS
.,
NLS_CALENDAR
GREGORIAN
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_DATE_FORMAT
DD-MON-RR
NLS_DATE_LANGUAGE
AMERICAN
NLS_CHARACTERSET
WE8MSWIN1252
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_SORT
BINARY
NLS_TIME_FORMAT
HH.MI. SSXFF AM
NLS_TIMESTAMP_FORMAT
DD-MON-RR HH.MI. SSXFF AM
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_TIME_TZ_FORMAT
HH.MI. SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT
DD-MON-RR HH.MI. SSXFF AM TZR
NLS_DUAL_CURRENCY
$
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_NCHAR_CHARACTERSET
AL16UTF16
NLS_COMP
BINARY
NLS_LENGTH_SEMANTICS
BYTE
PARAMETER
----------------------------------------------------------------
VALUE
----------------------------------------------------------------
NLS_NCHAR_CONV_EXCP
FAKE
--------------------------------------------------------------------------------------------------------------------------
After that happened, I created pfile from spfile and changed the setting to * .nls_language ='AMERICAN_AMERICA. WE8EBCDIC37' in the file pfile.
Then, I created the the pfile spfile and attempted to restart the DB... But it still does not work.
I always get this: ORA-12700: invalid value of the parameter NLS (nls_language)
Need your help guys :)
Itzik(1) delete nls_language = pfile XXXXX
(2) start
(3) create pfile spfieSQL> sho parameter nls NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ nls_calendar string nls_comp string BINARY nls_currency string nls_date_format string nls_date_language string nls_dual_currency string nls_iso_currency string nls_language string AMERICAN nls_length_semantics string BYTE nls_nchar_conv_excp string FALSE nls_numeric_characters string NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ nls_sort string nls_territory string AMERICA nls_time_format string nls_time_tz_format string nls_timestamp_format string nls_timestamp_tz_format string SQL> alter system set nls_language = 'HEBREW_ISRAEL.IW8MSWIN1255' SCOPE=SPFILE; System altered. SQL> shutdown immediate; Database closed. Database dismounted. ORACLE instance shut down. SQL> startup ORA-12700: invalid NLS parameter value (nls_language)
then I open my pfile file and remove the line of nls_language
SQL> startup pfile='XXXXXXXXXXXXXXXXXXXXXXXX\init.ora.9232012103855'; ORACLE instance started. Total System Global Area 1636814848 bytes Fixed Size 2176248 bytes Variable Size 956304136 bytes Database Buffers 671088640 bytes Redo Buffers 7245824 bytes Database mounted. Database opened. SQL> create spfile from pfile='XXXXXXXXXXXXXXXXXXXX\init.ora.9232012103855'; File created. SQL> shutdown immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. Total System Global Area 1636814848 bytes Fixed Size 2176248 bytes Variable Size 956304136 bytes Database Buffers 671088640 bytes Redo Buffers 7245824 bytes Database mounted. Database opened. SQL>
Published by: Fran on October 25, 2012 07:09
-
Windows does not start after changing the partition with external software
Hello
I messed up and followed some bad advice. Water under the bridge, but I want to recover my bootcamp partition if possible. I've seen several messages with the right process, but decided to post hear instead of assumptions. I am running OS X El Capitan on an early 2011 MacBook Pro. My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing. I have 10 Windows on the bootcamp partition.
I'm going to throw a bunch of data from my survey here.
Capella: ~ list of the ronh$ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 250,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 58.7 GB disk0s5
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 190,2 disk1
Logical volume on disk0s2
B6DC811B-004D-4245-83C9-8FAA0B51FD9E
Unencrypted
Capella: ~ list of cs ronh$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 190546800640 B (190.5 GB)
Free space: 19005440 B (19.0 MB)
|
+-< physical="" volume="">
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 190546800640 B (190.5 GB)
|
+ -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume
----------------------------------------------------------
Encryption type: no
|
+-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 190175473664 B (190.2 GB)
Reversible: Yes (no required decryption)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 488397167
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
373840896 1024
373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
335 488396800
488397135 32 table dry GPT
488397167 1 dry GPT header
of gdisk.
Command (? for help): p
Disk/dev/rdisk0: 488397168 sectors, GiB 232.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 488397134
The partitions will be aligned with the boundaries of sector 8
Total free space is 1365 sectors (682,5 KiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 372571359 177.5 giB AF05 Macintosh HD
3 372571360 373840895 619.9 MiB AB00 Recovery HD
5 373841920 488396799 54.6 giB 0700 BOOTCAMP
It is worth spending time to recover? Thank you.
Ron
1. can you describe the problem and the steps you took to get here?
2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.
-
After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).
A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.
Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?
Thanks for your help.
Hi DaGeLi,
· Provide us with the complete message you receive.
Follow the methods below:
Method 1:
You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852
Method 2:
If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console
How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545
Otherwise, you may need to make the boot floppies. See the link for the procedure below:
http://support.Microsoft.com/kb/310994
You can also contact the manufacturer of the system to get the Windows XP CD.
For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think
-
When I right click on the icons to run where it shows the location of the opened file and run as administrator under that it says "start". I ran 6 different viruses, malware, rootkit, scans etc. everything looks clean, but 'start' is still there when I right click the executable files. How can I get rid of him? I tried the System File Checker tool, it didn't work. When I click on "Start" it is not now open applications.
Do not know if it is any help.
http://www.online-tech-tips.com/computer-tips/Windows-right-click-context-menu/
Be careful when you change the registry so... Make sure that you have backups.
-
Getting blue screen error after changing the registry system, how can I do a system restore
Vista system was a repair to start and got stuck on 3/3
I can't start windows or even in safe mode
I do not have a backup of drive to back up either
I tried to rename it in the registry, now I get the Blue error message on what ever I did in the registry
When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.
If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.
If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.
Maybe you are looking for
-
Alphabetical order of my PURCHASE on the App Store list
Sometimes, I need information that I might or might not have, purchased on the App Store. The problem is that my list goes back to April of 2011 and it's too long and too much trouble to use (it is now classified by date of purchase). I wonder if the
-
IX2-disk to read directly from Windows10
Hello Is someone can you please tell me how I can read a disc of my IX2 Windows10 form? I connected the drive without going through my IX2 while I can't reach him more and the first disc is damaged. So I want to connect the second drive directly to m
-
Still can not internet. Have tried several thing to fix my pc. After reading a lot of things about me on the forums. I think that my bios net registry entry is corrupted. What should I do to fix... Last resort will be to format disk to reload a
-
How to stop of is "Congratulations on your new computer" pop up in Vista
Everytime I open Internet Explorer, a "congratulations on your new computer ad pop up and won't let me do anything unless I chick OK.» How can I get rid of this?
-
Ink cartridge HP Officejet 4620 unrecognized black
I removed my black cartridge to replace and off the printer. Now, the printer does not recognize the new cartridge, HP 564 black. After researching the issue, I discovered that HP advice not to turn off the printer with a lack of carttridge. Is it