Cannot get list of castle wolfenstein multiplayer game servers... just reinstalled rematch after recovery and system crash
Had to do system recovery after a crash... re-installed Return to Castle Wolfenstein and failed to get the list of servers to show all servers even after refresh or get new list... even with or without firewall... even with virus scan turned OFF... even typed in the system to allow for the... Help
Hello
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=return%20To%20Castle%20Wolfensein%20
Method 1:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not uninstall your antivirus software. If you must temporarily uninstall to install other software, you should re - install it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks
Hope the helps of information. Post back and let us know the results.
Tags: Windows
Similar Questions
-
Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes.
I unintalled (on my MAC) and reinstalled twice. Makes no difference. Any suggestions?Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the option key when starting Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any improvement?
While you are in Mode without failure, you could copy a list of your extensions and paste them into an answer? The best place for this is the support information page - either:
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
Scroll down to the Extensions section, and then select from there until the end of the following table with the mouse and copy. Then paste into a response. It may seem a bit messy but don't worry, we're used to it.
In addition, if you check your homepage settings, he changed? This article explains where to find that page preferences: start-up, homepage, tabs and download settings.
-
Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.
I did take all measures please help.
Hello
Can try you it on another browser that the problem does not come up on top of our end.?
Kind regards
Akshay
-
I just hooked up my computer and saw it is no games here. What should I do?
Try this: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/b76359b8-5bcc-47cc-94e8-80eab9958e5f teengeek.freehostingcloud.com
-
This machine came in the form of windows 8.1
Greetings,
Are what software or program you trying to boot from?
To do this.
Insert the USB key into a USB 2.0 port.
Reboot the system and press "ESC" key immediately after the judgment.
Now select "Boot Menu".
USB support can appear in two places: in UEFI or legacy.
Try UEFI, if this does not work then repeat and inheritance.
Let me know how it goes.
The Beatles: we can Work It Out!
See you soon!
-
I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.
Hello Vaishnav,
Thank you for using communities of Apple Support.
I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.
First force quit Game Center.
- Press the Home button twice quickly. You will see small glimpses of your applications recently used.
- Swipe to the left to find the Game Center app to close.
- Swipe up on the preview of the Game Center to close.
If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.
Use iTunes to restore your iPhone, iPad or iPod to factory settings
Best regards.
-
System details: a core i7 920 w / 6gig of memory running with vista 64 home premium and an ati 4850 video card.
I had just updated to service pack 2 when I began to experience great green snow pixels while playing games. Once held, the games sometimes recovered, but usually locked. A few times I had the BSOD, it mentions the atikmdag.sys file. When running in SafeMode after an accident, there are large graphic pink vertical lines running through the screen, but I can read through them.
I tried to fix things:
-Restoration of the system, no useful because the sp2 update seems to erase the old restore points
-updated to latest video drivers
-Uninstall and reinstall the video drivers,
-Uninstall and reinstall the games
-uninstall service pack 2None seemed to work permenantly.
No matter what suggestions would be greatly appreciated...
Thank you
cluelessincali,
It seems that the video card software is causing problems. The file you mentioned causing the BSOD 'atikmdag.sys' is part of the ATI software. You can use The Windows Installer Cleanup utility and remove all the ATI from your system software. Can I start with just install the driver and not the other ATI software and see if that helps. You can also clean boot your system to ensure that no other software is causing a problem. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I don't want to download the latest version of Firefox more than once. I want to download it and put my other computers. I have a limited download quota.
The full Offline Installer is here:
http://www.Mozilla.com/en-us/Firefox/all.html -
After update to El Capital, cannot get numbers key pad to work on several different keyboards
Updated to v10.11.5 and now cannot get the keys on the keyboard to work. Have tried several keybds and different brands. Any suggestions?
Not sure if it works but try resetting the SMC.
Reset the management system (SCM) controller on your Mac - Apple Support
-
Why are there people tecsavy call me to get money for my microsoft programs I already have bought with my computers and they crashed my good computer, I am a stay home Grandma take care my 3 grandchildren, they wanted 300. for my computer with windows vista and now they want 190. for this computer, why microsoft would let people do such things
s7cwa7Hi Julie,.
Microsoft has none of the unsolicited telephone calls to help you fix your computer. You can consult the following documentation to learn more about the same.
Avoid phone scams | A cybercriminal Tech Support Scam | Security threats
Fraudulent emails and credit scam advice cards | Microsoft Security
-
Cannot connect to MSN Multiplayer Games
I played on multiplayer MSN for centuries, but not been able to connect for 10 days now, anyone else have this problem? can someone tell me other ways that I might be able to open a session.
Hello
Thanks for the reply.
I suggest you to contact MSN games to get help.
Help MSN new games multiplayer games
http://zone.MSN.com/en/support/article/supporthubpremierpass.htm
Contact Customer Support
-
Return to Castle Wolfenstein - platinum edition
I uninstalled Return to Castle Wolfenstein, reinstalled on my new Dell with Vista OS.
Vista can not read my program files where I loaded all my card games and downloads.
When I join a server, I am often struck for lack of information Punk Buster, although I
all the information in my files. I often wonder to download maps and weapons that I already have.
Anyone else have this problem with Vista? Solution?Hello SpecOps,
Thanks for posting on the Community Forums of Microsoft Vista.
You may need to contact the game manufacturer in order to check with the game settings to join the server.
Third, to 3 third party sites or information drivers created by 3rd party companies that have been discussed are produced by vendors independent of Microsoft; and we give no warranty implied or otherwise, regarding these products so use at your own risk.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
It will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Get the debugging box when PC game opens and closes and then crashes
Game crashing on Vista
I open the program to play my PC game and I get an error of debugging and closing program on my screen, then it disappears and the game opens normally. Then I get about 20 minutes in the game and it crash and send me on the desktop and the program closes itself. I have DEP problems, but I think I solved those with the fix tool. But why the fracas?
Hello
Don't forget to check with the Game Maker support and ask in their forums known issues
as others have probably experienced similar problems.=====================================================================
It is a fairly complete general performance convenience store that should help in the
issue. Use the startup clean and other methods to see if you can identify the cause and/or
eliminate the problem.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Cannot get new url of the tab open with the homepage (Google).
After the upgrade, I cannot get rid of 12 boxes (Facebook, Youtube, etc.) on the new tab or make open with my homepage (Google). I tried two different newtaburl add-on, uninstall and reinstall Firefox and the directives of the object: subject: config, browser.newtab.url, etc. I can't even scratch try this approach. I can't get the 12 bar blues.
Well, I know I'm repeating something you've read before, but just for completeness (and also, I suspect this isn't built-in Firefox page):
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered
(3) double-click the preference browser.newtab.url and enter your favorite page:
- (Default) page thumbnails = > subject: newtab
- Blank tab = > subject: empty
- Built-in Firefox homepage = > topic: welcome
- Any other page = > full URL of the page
Press Ctrl + t to open a new tab and check that it worked. Fixed?
Some traps:
If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.
Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Extensions
If the modification works during your session, but during the next startup is return to the unwanted page: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.
A little luck?
-
Tecra M4: Cannot get com-port working on Advanced Port Replicator III
Hi all
I bought the advanced III PA3314E-1PRP port replicator but could not get work com-port.
It does not get listed in my equipment manager.
Anyone has an idea why not?Thank you very much in advance!
See you soon
Infinito
I agree with Akuma
(The name says it all) port replicator replicates the available ports on the laptop.
If your laptop does not have this port, then you cannot use it with Port Replicator.
Maybe you are looking for
-
I have a 17 "MBP that is very slow. I have installed El Capitan and only 8G of RAM. The main symprom is a busy signal when I try to do something. I removed most of the apps/games that I bought from the App Store, but it does not help. QUESTION - can
-
SD slot, it doesn't on my Sat Pro M30
Hi guys,.I'm having a problem with my SD slot, it doesn't. I checked my device manager and I found it in my device list, I have troubled shoot for problems and appear nothing wrong with it. I insert the meadia card in the slot and I have the blue lig
-
iPad 2 iOS 9.3 Flickering Pixels of Air
I searched some forums/sites and can not find someone else who has reported this problem (yet)... Immediately after the upgrade today... For most on the videos, but also if I bring up the background shortcut bar, or if I scroll quickly in Safari, etc
-
Where the Notes files are stored
Hi all Today, I have reinstalled my MacBook Pro 2015, but I can't find how to restore my notes. I did a lot of research on the internet and found where the notes are stored in the library (where are stored the Notes files?), but it seems that this tr
-
try to recover uninstalled file
A graphics Intel(r) hd program has been uninstalled by mistake my destop. I would like to know if I can recover the program and how? Or I can download a new version of the internet? the pc is a flag of hp with windows 7, processor intel core i5, mode