cannot get network goflex home to recognize

Similar Questions

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• OfficeJet L7590 cannot get network on the extension of the network installation

  I'm hoping to find help before I need to run 50' network cable lilou my living room.

  I have an Office Jet L7590 printer.  I've had it for a few years, and until recently had it put in place thanks to our home wifi wireless.  We have 3 computers that print to it, all equipped with Windows Vista, with no problems... until I had to rearrange my office at home for an adult child go back home (don't started even get me here, lol).

  Thus, the new agreement is that the printer is now connected to the Extender of wireless network that we have implemented because I wasn't getting a good signal in the living room of the wireless router.  Since we moved the printer it reads "printer offline" in my control panel.

  The printer works fine if I plug a network cable on the router instead of the extension of the network, so I know it works, but because it is now enjoyed away from the printer that the extension of the network, I really need to connect it all together.  I'm pretty much the only computer that connects to the Extender, the others are connected via the wifi router.

  I hope that I gave all the necessary information, if anyone can help me please... I got until Tuesday evening to figure this out before I have to pass the cable network around the living room!

  We had problem connecting printers wireless Extenders because it seems that the printers have a difficult time trying to determine which SSID to connect to your router since the and extension have the same SSID... right?  One thing that works is power line adapters.  This example uses the wiring in your House for the Ethernet connections.  Works very well and since printers are not nits, no need of a lightning speed fast.

  What may also work is a client bridge.   I wrote this a while ago and will work in the House very well with a wireless printer.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/connect-your-wireless-printer-when-away-from-home-in-a-hotel/TD-p/2725419

• Cannot get windows 7 Home premium family pack to upgrade my three laptops

  Could not get the software to upgrade my 3 laptops... family of windows 7 Home premium pack... why not... it's crazy... What is microsoft or mac

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. try upgrading again Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Cannot get my new office to recognize the second monitor.

  Original title: multiple monitors

  My new desktop running vista computer will not recognize the connection of the DVI cable to my old monitor, who was formerly connected by analog on my laptop. What should I do?  The cables are correct and the correct entry site.

  Try this:
  Right click on the desktop-> graphics options-> output to-> dual display. You can also do it on your graph icon on the Notification area.

• Cannot get Windows Media Center to recognize remote STB

  I have a desktop Gateway computer with an AMD Phenom 8400 Triple Core processor.  He is 1 year old and runs Windows Vista.  The Windows Media Center seems to work perfectly.   Recently, I decided to add the TV option to the computer since the last of my children has left and I got a set-top box (STB) available.  I have Verizon FiOS service and I made connections that were provided in the installation of the gateway documentation.  I know it is getting signal through because when I try the manual set up the process, I get a small square window of 2 inches with channel 3 in it.  I can change this channel with my set-top box remote to all channels that are available from my service.  When I continue on in the whole of the process I get to a point where it asks me to point my remote decoder and press on and press and hold the '0' button so Media Center can learn the codes (and, I presume, activate the remote control centre for use).  It is never past "0".  I have new batteries in the tuner and I tested it on another box, so I know it works.

  I tried put automation in place two option first and that didn't work either--that's why I went to the manual set up.

  As I said above, the Media Center works great with all other options and the MSNBC documentary line CD/DVD playback, etc..  It's just the TV live set up for the Media Center tuner that gives me a royal pain.

  I hope someone can help me to finish the game.  Thank you, John.

  Looks like you are trying to change your set-top box with a remote control channels of Media Center.  To use Media Center with a set-top-box, you would need a remote control Media Center and one cable IR and remote sensor.

  Please see the following diagram: Media Center and your set-top box

  During the implementation of process Media Center application that aim you the decoder at the remote sensor and press the 0 key.  The remote sensor at the moment will record the signal from the remote control so that it can be reproduced for the decoder when the Media Center remote control.

  -Thank you

• ESXI 5 and I created a virtual server, now I want to install the OS on the host, but cannot get the virtual host to recognize the CD/DVD where I have the installation disc.

  I have tried the option "edit" for the VM., changed devices, no luck, tried the bios option to create the primary boot device CD, no luck.

  any ideas?

  I think I have this problem myself, had to return to editing, CD/DVD and check the box that had 'host' not the 'customer '.

  seems good now.

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Airport Extreme cannot get dhcp network

  Hello

  My main router connected to the internet and to act as a DHCP server, the extreme Apple router can join this network and get IP from the DHCP server normally, but all clients connected to Apple Extreme cable cannot get DHCP.

  I tested the same configuration but replace Apple Extreme by an Apple Express, the customer may obtain the DHCP when connect you cable.

  Anyone has an idea about this?

  Thank you

  Tuan

  My main router connected to the internet and to act as a DHCP server, the extreme Apple router can join this network and get IP from the DHCP server normally, but all clients connected to Apple Extreme cable cannot get DHCP.

  Unfortunately, it is because, unlike the AirPort Express, the extreme can serve as a wireless Ethernet bridge to provide wired clients with DHCP.

• How can I get my version of Vista 64 home to recognize more than 16 GB of memory?

  How can I get my version of Vista 64 home to recognize more than 16 GB of memory?

  Upgrade to Vista Business...

  Version	Limit on X86	Limit on X64
  Windows Vista Ultimate Edition	4 GB	128 GB
  Windows Vista Business	4 GB	128 GB
  Windows Vista Business	4 GB	128 GB
  Windows Vista Edition Home Premium	4 GB	16 GB
  Windows Vista Home Basic	4 GB	8 GB
  Windows Vista Starter	1 GB

• Update downloaded yesterday, now cannot get back in. ipad does not recognize the password id ot. help means your upgrade killed my ipade

  Please help me. My ipad has a great until I downloaded the update yesterday, now I can't get back in, does not recognize my address or password...

  the update killed my ipad. How can I get online?

  There are chances that you have purchased second hand iPad? If so, you will need to contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

  If she does not accept your password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• Cannot connect to the home network wireless hp 6910

  I can connect anything either but my hp (compaq) 6910p to my network wireless home.  It will connect to the network unprotected to a neighbor, but not my own.

  Hello

  I suggest you follow the steps in this link to solve home network problems:

  http://support.Microsoft.com/kb/308007

  It will be useful.

• You cannot change the ID network of home-based business

  I'm changing my network ID of a network of home-based business, but after I restarted my computer it comes back constantly as company.

  Hello Hector,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Your system has already been connected to a network domain?
  3. What is the edition of Windows 7, you use?

  The question arises after the restart, if your system does not have the authorization of the user to change the location of the network. To diagnose and solve the problem, I suggest you try the following steps:

  Method 1:

  You can also perform network troubleshooting that might help us diagnose the problem better.

  Access the link for more information on troubleshooting network below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  The question may also be due to the user permissions are not available to change the location of the network. You can try the following steps and change the following settings.

  1. Click Start, type gpedit.msc in the search box and press ENTER. This step opens the local Group Policy Editor.
     (Click Yes if you are prompted.)
  2. Expand Computer Configuration, expand Windows settings, Securitysettings, expand network list manager policies, and then double-click network in the right window.
  3. Go to the network location tab, then click on user can change location under the section user permissions.
  4. Click OK , and then close the Group Policy Editor.
  5. Restart the computer.

  Note: The steps above are valid for Windows 7 Professional, full and business editions.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.

• Cannot get wireless with my Satellite Pro L20

  My Satellite Pro L20 simply does not recognize my wireless network at home - he can't even see when I search for wireless networks. With my other non-Toshiba laptop on - there was no problem and that captures wireless 4 or 5 in my neighborhood.

  My Tosh works well when he hard plugged on the Net, but if you help get me wireless I would appreciate.

  Are you sure that your laptop is an installation of a WLan minPCI card?
  You can check this in the device under network adapters Manager

  If the wireless network adapter is listed in the device manager then you should check the compatibility of the WLan standards.
  If the wireless network adapter supports only the 802. 11 G standard and your router supports only 802.11 A or 802.11 standard B then you will not be able to connect to the WLan router.