Cannot get my new office to recognize the second monitor.

Similar Questions

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• HP laserjet pro 400 m401 dw - how do you get to recognize the second impression tray?

  We just bought this printer about a month ago, and we love it, so we bought the second tray (or drawer, however you want to think of it) because my biggest complaint every day is reload the paper trays. WE have tried everything we can think of to get the printer to recognize the second tray and pull the paper away when the first is empty, but its does not work. It's like we bought it for no reason. Anyone know how to make it work? Thank you

  You must distinguish between the following:

  • Printer - does the printer itself knows that the tray is present? Check by printing a report 'configuration', or by checking the settings with the built-in Web server. If the tray is not recognized, this implies a physical problem with fitting tray, etc.
  • Of the computer - the printer driver on your system knows that the additional feeder is available? On a system Windows, look at the device settings tab in the printer properties dialog and check the extra tray is set to installed and not installed.

• Im getting a new computer soon and the need to get the link to reinstall my Adobe CS3 (or 4)

  Im getting a new computer soon and the need to get the link to reinstall my Adobe CS3 (or 4)

  Hi Suzanne,.

  Please find the link below:

  CS3: download products CS3

  CS4: download products CS4

  Kind regards

  Sheena

• I get a new PC, what is the procedure to install my old PC again Contribute?

  I get a new PC, what is the procedure to install my old PC again Contribute?

  If this isn't a CLOUD version, you install in the same way you did the first time... Put your installation disc (CD or DVD) in the drive and follow the instructions on the screen

  If it IS a Cloud version, you log your paid subscription of cloud and install from there

  http://forums.Adobe.com/community/contribute

• I'm trying to calibrate a NEC monitor connected to my iMac end of 2014 running El Capitan.  Spectraview calibration software, does not recognize the NEC monitor.  Suggestions?

  I'm trying to calibrate a NEC monitor that is attached to my iMac end of 2014 El Capitan (10,11.4) running, the calibrator (Spectraview) is a dedicated to the NEC calibrator.  Unfortunately, I can't get Spectraview to recognize the NEC monitor.  Any suggestions?

  I looked on the NEC site and haven't seen El Capitan compatibilities listed.

  http://www.necdisplay.com/support-and-services/Spectra-view-II/compatibility#Mac h_os

  You should contact the support of NEC.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Cannot get a connection of help after 120 seconds.

  Hello
  
  Cannot get a connection of help after 120 seconds.
  I get this result when I run OpenScript scripts of Test Manager.
  I installed browser support.
  
  Can anyone advise, a solution.
  
  Thank you
  LEA

  Hi Leah,

  Maybe I wasn't clear, you must create a specific Windows user account for the service. Or if your all running on a box, use the account that you are currently using to log on to the service.

  Then go to services, to find the Oracle Oracle Application Testing Suite Agent Service, double-click on and switch to the logon tab. It specify that you want your agent service to run under a different account under the local system account.

  Good luck, Jules

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?

• I have recently in the last 24 hours, updated my OS to 10.11.3. The problem I have is that it no longer recognizes my second monitor. When I go into my poster in system preferences there is no detection monitor botton to press as shown in the help screen.

  I have recently in the last 24 hours, improved and install OS 10.11.3 it no longer recognizes my second monitor. When I go into display in system preferences, there is no monitor to detect Botton appears in the window in the described help screen. Does anyone had this problem after the update? Is there a solution?

  Video Troubleshooting internal and external monitors

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• How can I get windows appears on the second monitor?

  Windows does not detect the second monitor.  Unable to access options to the mirror of the main screen.  Second montor is connected, but is only the display wallpaper.

  Hello

  1. How did the second monitor connected to the computer?

  I suggest you try the steps from the link below and check if it helps.

  Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors

  Hope this information is useful.

• How can I get Windows Photo Viewer (7) to play his slide show on the second monitor?

  I attach a second monitor to my laptop with an RGB cable.  I would like to be able to play the slide show and screen saver of photo on my extra monitor instead of on the little tiny screen on the laptop.  Is there a way of photo windows 7 Configuration Viewer to do?

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, you are not able to play slide on the second monitor photo viewer. I'll be happy to help you on this question.

  I suggest you try the steps from the following link on how to move the windows or the programs between the different monitors.

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.