Cannot install D - Link DWA-140 - WNICAPI. Missing DLL

Similar Questions

• D Link DWA 140 Wireless Stick does not work with Windows 7 Pro x 64

  After searching the Internet for most of the day, I am naïve. Installed Win 7 Pro x 64 (from MSDN-AA) today and I wanted to use my job well DWA 140 to connect to my router for internet. The Board in use is the Asus P5p77-M. All, who tried with 2 different USB stick work USB ports in question. Windows is up to date, as it's the Bios and Chipset drivers, on the site of Asus's latest versions are installed. The DWA-140 appears up like works well in my device manager, but what is it. When you install the software from the site Web of D-Link, the connection software shows no WiFi at all, and the same thing happens if I chose to install the drivers Ralink (manufacturer of the chip inside the DWA-140). All the ideas here what to do?

  Carsten

  What happened when you tried the Windows software?

  He was able to detect the card?

  Looks like a program prevents the identification of the card.

  I would like to start with a clean boot to make sure that a startup program is not causing the problem:

  http://support.Microsoft.com/kb/929135

  If this does not work, I stay in the State of clean boot and disable anti-virus and firewall temporarily and reinstall the software of connection:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Kobo, I get "QtSolutions_SingleApplication - 2.6.dll is missing on your computer - windows 7»

  I tried to use my kobo to my desktop after upgrade to windows 7 and now I get "QtSolutions_SingleApplication - 2.6.dll is missing from your Computer.Tried reinstalling the program to fix this problem." but I can't find the program to install it. Can anyone help? If so thank you in advance. :)

  Hello

  Thanks for posting your query in the Microsoft Community Forums!

  I suggest you click on the link below for the support of Kobo.  There are different requests for information on how to install and run Kobo.

  Support of Kobo

  http://www.Kobo.com/help/

  Hope that helps.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Cannot install the Pinball. Message is "dclman32.dll is missing".

  Have a disc with Pinball on what will not be installed. Rpet "dclman32.dll is missing"; it of what and how can I solve this problem please...

  Moved from feedback

  Original title: how to install 'dclman32.dll '? Someone please help!

  Hi, Spin324,

  What version of Windows are you using?

  Are you sure that the file name is not dciman32.dll instead?

  Dciman32.dll file is the dynamic library for display Control Interface (DCI) Manager. The Director of DCI is used to improve graphics performance when you use direct access to video memory. Applications that usually rely on the file dciman32.dll for performance include games, CAD drawing and graphic editing software applications.

  Run the System File Checker

  Start > type CMD

  Right click on CMD and select run as administrator (Windows Vista, 7 & 8)

  Press enter

  Type sfc/scannow

  Press enter

  Note there is a space between sfc and / scannow

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833

  Let us know if you need more assistance.

• Cannot install SP3. Proret.msi is missing.

  I have XP on a Media Center Edition 2003. For years, I resisted to get SP3. Now, I want it. In my efforts to install from Microsoft, I get a message that I need to install Microsoft Office Professional. I have a lot of CDs of Microsoft, but none of them work. There are also research proret.msi message in a folder. I searched, but I can't. Now, how can I get SP3? The automatic update does not even work.

  Hello

  · You try to install service pack 3 office?

  · What is the exact error message that you receive with the error code?

  · Were there any changes made on the computer before the show?

  If you try to install service pack 3 Office then post your request in the forum office to improve assistance: http://answers.microsoft.com/en-us/office

  Also, you may consult: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

• "Cannot install the update of Java error: sp.dll ' is corrupt.

  Original title: installation of Java Update

  While the update of Java SE 7 7 could not complete the installation.  Screen rises 'sp.dll' is corrupt. How to fix the damaged file and install the update.

  Hello

  You can manually try to download the update of Java from the following link:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If the problem persists I suggest you to contact Java support for assistance:

  http://www.Java.com/en/download/support.jsp

  See also:

  http://www.Java.com/en/download/help/index.XML

  Let us know if it helps.

• Cannot install GTA san Andreas - error on MSVCR110.dll

  If Iam trying to install GTA san Andreas and this error seems to me:

  "The point_crtCreateSymbolicLinkW of procedure not found entry into the MSVCR110.dll dynamic link library."

  can someone help me please?

  Original title: help me quickly please!

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. There may be several reasons for this problem to occur, which includes lack of Windows dll files or problems with the installation files of the game you want to install.

  To diagnose and fix this problem, try:

  Run the tool (SFC.exe) System File Checker

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. It will scan your system files and repair the system missing or corrupt files in Windows. To run the analysis of CFS, refer to Microsoft article below.

  http://support.Microsoft.com/kb/929833

  Let us know the results of the SFC scan. See also the suggestion posted by JesseArroyo on August 21, 2014. He helped some members of the community to resolve similar problems with the installation of an application.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-Winapps/cant-install-Adobe-Flash-Player-because/788a1fb7-33ef-473b-bae9-37e04690054c

  Let us know the results once you have tried these methods. We will be happy to help you.

  Thank you

• Cannot install Adobe reader XI due to msvcr110.dll

  Hello world

  I am German, new to this forum and don't know if I can post my problem here in my native language, so I better try first English (and I also apologize right now for my not so perfect English):

  I am running windows 8.1 64-bit on my computer and I can't install adobe reader XI on my system. Try to do it, I get the answer that the installation is not possible due to problems with msvcr110.dll which must be installed first. I tried to install the version of Player X instead and got the same answer.

  To resolve this problem, I already asked google and also tried to find a solution to all the discussions here, but without any success. Although this file is already on my computer, I downloaded it following once more an advice that I found and after unpacking the zip file, I moved the msvcr110.dll downloaded to the c.\windows\system32 place. Before you save it, I got the information that such a file is already there. Nevertheless, I was overwriting the old and rebooted the system. The problem is always the same. Then I tried to install the environment of Microsoft Visual C++ 2012 Reditributable (x 64) Version 11.0.61030.0 runtime (update 4) und restarted the system, once more. But this doesen´t solve my problem either, it is still not fixed.

  Now, I have no more ideas how to deal with this problem and I hope someone here can help me. Only to read pdf files, I could move to the foxit reader, but recently I found a very interesting plug in for my chrome browser that allows to convert a Web site directly in a PDF file unfortunately this sheet in doesen´t work without an adobe on the system drive.

  I already thank you in advance for your support

  kruemel_73

  First of all, never download the DLL files individually.  They may not match your system environment, and also that they are not properly registered after download.

  With regard to the redistributable C++; on a 64-bit system, you must install both x 86 and x 64 versions.

  But what about your problem, I don't know why this is happening, especially since you had already msvcr110.dll already on your system.

  Maybe the http://get.adobe.com/reader/enterprise/ offline installation program will work better?  If not, I'll give you the download address for the MSI installer, which can work even better.

• Cannot install printers get INF missing item message

  Cannot install printers get INF missing item message

  Try to download and re-install the drivers. Looks like there is something wrong with the driver file you have.

• Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570

  I have Windows 7 Professional upgrade disk. I select custom installation. the trial ends approximately 54% then displays this message: Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570 do - what I do?

  try to install by removing a strip of memory (RAM) If you have 2 stick of ram installed.

• Qosmio F30-140 - cannot install the driver display and Bluetooth

  Hi all!

  I have a little problem with the installation of recovery.

  After installing Windows I don't have the graphic card installed and is not everything, I can't turn on bluetooth because the computer cannot install it. New form of drivers Toshiba do not change it's the same thing. If I install the graphics card, the info is this graphics card was not found. Bluetooth installation always hangs in the middle. All the original drivers are on the disk, but I can not install them. All I get is a "controller VGA with one?" in Device Manager.

  Help, please!

  Hello

  Normally, everything must be installed correctly after using the Toshiba Recovery disk but before trying to update a driver, you must remove the old driver first. So, go to Control Panel-Add/Remove programs online and remove the old driver and reboot the laptop. You can then install the latest driver on the Toshiba site.

  In the worst case, there is something wrong with the motherboard and you must go to an authorized service provider, but first try the new drivers.

  Good bye

• Cannot install the update KB2686509 DLL error missing files

  Original title: kb2686509 download fails, DIFFICULTY HOW, please?

  Automatic updates KB2686509 download fails repeatedly.

  Caused by missing DLL files

  OS - XP

  Hello

  (1) did you do changes on the computer before the show?

  (2) what is the complete error message you get?

  (3) you are able to install other updates successfully?

  I suggest to refer to the article and perform the steps mentioned over there and check if it solves the problem.

  http://social.technet.Microsoft.com/wiki/contents/articles/10880.kb2686509-failure-due-to-missing-DLL-files.aspx

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756 -How to backup registry.

• Cannot install the update error KB2718704: 0x8007F064

  Original title: XP, error Code (KB2718704) install failed: 0x8007F064: after that I tried to solve this problem, because as far as I know, but still, there is no, then how should I do?

  Microsoft Update tried to install the update for Windows XP (KB2718704) whenever I closed my computer, but it could not include my manual installation.

  Hello

  Method 1: Run the fixit

  Check out the link:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

   

  Method 2:

  Check out the link:

  You cannot install some programs or updates

  http://support.microsoft.com/kb/822798.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.microsoft.com/kb/322756/.

  You can ignore the 7 method to perform the upgrade in-place.

   

  Method 3: Scan SFC

  SFC scan will find all missing or incorrect system files and repairs them.

   

  File system (CFS) Checker

  http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true.

   

  Method 4: Install the updates to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

  Step 2: Install the update manually

  Check out the link:

  Update for Windows XP (KB2718704)

  http://www.microsoft.com/en-us/download/details.aspx?id=29975.

   

• 8007370c error code cannot install updates

  Have a Dell Inspiron I1720, TS250 @ 1.50 GHz, 2 GB - Ram, running Vista Home Premium.  I tried several times to install 13 updates (recent) starting with MS Net Framwork 3.0 SP2 - Vista, next KB2676562, etc.  Downloaded 13 but do not... settle retried several times, used the MS Fixit Center 3 or 4 times to correct errors of update. Get the following error from long:

  c:\ProgramFiles\MicrosoftFixitCenter\SAPF\System\60BB3EEE-C5FB-4233-B5FE-F8E36C1F78D9.9

  error code 0 x 80040154

  Background: high

  Other updates like MS security Essentials definitions get downloaded & installed without problem... I worked on this for 4 days... someone can help me resolve this quickly... my holiday is coming!

  E-mail address is removed from the privacy *.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  For more information, see the link below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If method 1 did not fix the problem, proceed to method 2.

  Method 2: Run the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If method 2 has not fixed the problem, proceed to method 3.

  Method 3: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If method 3 has not fixed the problem, go to method 4.

  Method 4: Turn off the Antivirus and firewall.
  
  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Try to reinstall the update.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope that helps!

• Cannot install updates custody saying error 0x8007007f.

  original title: cannot install updates custody saying error 0x8007007f. Why is this and how to fix this

  As my title says is that the problem can not install updates custody saying error 0x8007007f. Why is this and how to solve this problem and when I click on protector of windows it says cannot find program. How can I fix

  Hello

   
  1 are you facing this with any updates or specific updates?
  2 did you changes in the computer before this problem?
   
  Method 1: Run the patch from the link below, restart the computer and install updates.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2: Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  Step 1: disable the security software temporarily.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2: Perform a clean boot and install the application.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem
   
  Method 3
  Restore the system to a system restore point when the computer was working fine. Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   

  Perform a scan of the SFC to solve the problem of Windows Defender.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833