Cannot install Office 97 "Ctl3d32.dll file is not installed correctly.

Similar Questions

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• Cannot import the Clipboard because the file is not a TIFF file.

  I'm not a frequent user of Photoshop, but for some time I still get the error message "Cannot import the Clipboard because the file is not a TIFF file."

  Extremely annoying actually.   Is there something that can be done?

  Another application place a TIFF file in the Clipboard, or at least advanced he was TIFF.

  When Photoshop or the desired BONE scan TIFF, there (because it cannot really be given TIFF).

  You need to understand what other application puts bad data on the system Clipboard.

• I got a fix, but the file does not open correctly. __

  I received this fix: http://hotfixv4.microsoft.com/Windows%20Vista/sp3/Fix291684/6000/free/395073_intl_i386_zip.exe

  The self-extracting file does not open correctly.  Any thoughts on how to get this to work?

  It's actually an executable file which probably opens a file or a zipped folder.

  If the procedures described above do not (or if you prefer another alternative), download the free 7 - Zip at: http://www.7-zip.org/ and install it and use it to open the zip file.  This should probably fix the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WAG160N Upgrade file is not the correct type or version of this device.

  I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:

  Upgrade file is not the correct type or version of this device.

  Update failed.

  Please select the correct file and try again.

  I forgot that I had extracted the first .zip file. Who and the upgrade worked.

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• Stand-alone labview application (.exe file) does not run correctly

  Hi all

  I'm doing a labview application only to run on another computer (I never did this before).

  I went through the tools-> build application prompts and was able to build an exe file.

  the program is supposed to control a power meter and measures of power, then save them in a text file.

  When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

  There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

  include these files when I create an executable?

  What are some common problems that arise when building stand alone applications that could be cause of my problems?

  And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

  Thanks for your help,

  Also, if you used the VISA, include the runtime with your Installer.

• File CR2 not opening correctly? Display solid bars of color.

  I open an CR2 file and opening with Photoshop, it displays as a normal CR2 file except the picture has been replaced by two solid blue bars and a yellow bar.

  Attached, the screenshot of the Photoshop screen and the screenshot of the actual image.

  I've uninstalled and reinstalled Photoshop without change in the results. At one point, he started telling me that Photoshop cannot open the photo because a ton of different files have not been installed. It disappeared when I reinstalled, but the result is the same as before with the bizarre bars.

  

  

  Disable the GPU using Prefs (Ctrl-K) / processor use chart (uncheck)

• Having problems with updating apps (V.32). The ipa file does not work correctly.

  Need help.

  Thank you

  Your mobileprovision file is incorrect or your certificate expired. See cannot install a developer .ipa file.

  Neil

• Thumbnails of files is not displayed correctly?

  My question is specific to the video files by extensions of: .avi, .mkv, .mp4, .flv

  On my desk, I have 1 .avi file. It displays a thumbnail of a still image of the film. Yet many others my .avi or other video files do not display a thumbnail of a still image. Can someone tell me why this is and if possible, how to solve this problem, so that all my video files display a thumbnail of a still image of the file?

  Thank you!

  I would offer 3 suggestions. They are not mandatory.
  If you agree to try them, do, in the order they are listed. If you're working, stop doing the rest of the list.

  1 do a full scan. Your machine may have caught something.

  2 do a check of the filesystem (sfc/scannow)

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press theENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  3 do a check disk (chkdsk/f/r)
  Start button > Search box, type cmd > look up, right-click oncmd.exe> click on Run As Administrator >

  in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.

  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
   

  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.

  t-4-2

   

   

• Developing RAW files, is not formatting correctly in

  Hello

  Today, I installed LR6 and my RAW files are not formatted properly developing. In previews and library, they open you very well. Opening both in Photoshop RAW files.

  It is an urgent job with a period very tight-help welcome! Thank you!
  

  

  Hi Cate,

  • Go to Lightroom > Preferences.
  • Please go to the preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Kind regards

  Tanuj

• the .mp4 files are not read correctly on 40TL968

  Hello

  A couple of weeks, I bought this TV and I could play via USB or DLNA .mp4 files. But for these past few days, whenever I try to play .mp4 files, they do not play correctly. They get stuck between the two - I mean the video stops and plays automatically. This happens every time, no matter I'm playing with USB and DLNA.

  But if I play .avi, they play effortlessly and flawlessly.

  No idea why this problem with playback of the .mp4 files?

  Thank you
  D

  > I have reset the TV, but still it did not work. He has yet to play mp4 files

  Have you done this correctly?
  I mean that you need to rest at default settings. In this case all the options that have been changed, could be the default value.
  To do this, go to:
  Configuration of the system-> Reset TV
  When authorities set turn it back on, the Quick Setup is displayed. Press OK to move the Setup program and perform an auto tune.

  In addition the user guide provides a list of supported formats (page 93) Media Player
  There is a list of the formats supported for music and movie files:

  _Music_ mp4 files are supported.
  The extension of files should be .m4a
  Audio codec should be MPEG-2/4 LC - AAC
  The maximum number of files in the folder: 1000

  _Movie_ mp4 files:
  The file extension supported: .mp4 or .m4v
  Supported video codec: H.264 (MPEG-4 AVC), MPEG-4 part12, 14
  Taken audio codec supported: MPEG-1/2 Layer 3, MPEG-2/4 LC - AAC / MPEG-4 HE - AAC

• Captivate 5 file does not publish correctly

  Hello.

  I have a file in Adobe® Captivate® 5, call him "Module 1" which generates only 2 files instead of the usual 3 files when I publish in Flash.

  In the destination folder, the HTML file is not there, a SWF file is not created (in its place a file labeled 'File' and has 0 KB).  Is the file Javascript correctly.

  While the publication process is happening, all messages indicate it is correctly published.  It presents a preview very well.

  I published another Captivate 5 file with the same settings to see if that would work and it seemed fine.  No problems.

  I don't know how to fix file that will not publish correctly.  I'm choosing publish in Flash, Flash 10, export to HTML.

  I tried editing for Flash 9.  Still did not work.  I tried editing e-mail.  The only file attached to the e-mail was a Javascript file.  Still, it should have 3 files.  Did not work.

  Need advice please!

  CB

  Hello and welcome to the forum,

  It is quite difficult to know what is the problem, the file may be corrupted (maybe a slide or object)? Although not occur so often on the CP5 as it was with the previous versions. Is your updated version: 5.0.2.630?

  Some actions that you could take, but not sure it will help:

  • clear the cache
  • Delete the Preferences file, it is labeled Captivate 5 and can be found in your profile:
  
  ... \users\\AppData\local\
• create a project empty with the same resolution, the slide of the blade (not all at once) copy and try to post when party have been copied

Lilybiri

• Get a message Windows cannot start because of some dll file missing

  Original title: computer has been hacked. no longer starts, can I use a copy "bought" Windows XP SP2 disk which is not installed on a different computer?

  1.) my mother's computer was hacked and fails to start.
  2.), I have a retail disk: Disk Installation of Windows XP SP2.
  (3.) I apparently do not have the serial number of the retail disk. It was purchased when I bought a computer years and has never been used.
  4.) I need to wipe my mother's hard drive and install from the installation of Windows XP purchased disc, but I'm having a problem without the serial number of disks.

  Thanks for your support!

  Hi FrippMalover,

  You can use the following link to retrieve Windows XP if you have found the system32\hal.dll missing.
   
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477
   
  Hope this information helps.

• ID Ueye_api.dll file is not found in system32

  I downloaded the software for Labview Ueye and installed. I did a VI using the API Ueye and everything was still fine.

  But everytime I open my VI which contains the API of Ueye application, I receive requests to locate Ueye_api.dll

  However, when I looked in the system 32 folder (where it was supposed to be), cannot be found.

  I tried looking for this dll in my C drive, but it was still not found.

  Now my Ueye API in labview runs and I'm stuck, is this dll not found anyway or is there any other way around it?

  A lot of help is appreciated

  XWX

  Reinstall the driver is the first course of action with this kind of problems. Seems that the file is passed somehow from your system. What could happen is another interesting question, as anyone else, but you can answer.