Cannot install the self-signed certificate

Similar Questions

• Configure SSL for OUD 4444 port Admin port-> replace the self signed certificates used

  Hi Experts,

  When installing OUD choose Certification self-signed for ports 1636 and 4444.

  Later I change the certificates used by the port of 1636 to a new key file containing the CA certificates. (Track the steps of: https://docs.oracle.com/cd/E52734_01/oud/OUDAG/security_clients_severs.htm#OUDAG00050)

  But same procedure does not have to replace the self signed certificates used by ports 4444!  Everyone is configured SSL (with Cert CA) on the Administration port?

  I couldn't even start the servers, you see an error:

  """

  category = gravity CORE = NOTICE msgID = 458891 msg = the directory server sent a notification to alert generated by the class org.opends.server.core.DirectoryServer (org.opends.server.DirectoryServerShutdown alert type, alert ID 458893): the directory server started the shutdown process.  Stop was launched by an instance of the org.opends.server.core.DirectoryServer class and the reason for the closure was an error occurred trying to start the directory server: NullPointerException (File.java:277 AdministrationConnector.java:843 AdministrationConnector.java:675 AdministrationConnector.java:182 ConnectionHandlerConfigManager.java:356 DirectoryServer.java:2932 DirectoryServer.java:1584 DirectoryServer.java:10108)

  «[27/sep / 2015:06:22:53-0400] category = gravity = NOTICE msgID = 458955 msg = the directory server CORE is now stopped "«»

  Post edited by: 1976902

  Sorry, I cannot help here - here are a few possibilities.

  Change connector Administration certificate

  https://docs.Oracle.com/CD/E52668_01/E54669/HTML/ol7-genssc-auth.html

  The failure of the handshake could occur for various reasons:

  • Incompatible encryption suites in use by the client and the server. This would require the customer to use (or allow) a suite of encryption supported by the server.
  • Incompatible versions of SSL in use (the server can only accept TLS v1, while the client is capable of using SSL v3 only).
  • Incomplete trust for the certificate of the server path
  • The certificate is issued to another area.
  • incomplete certificate trust path between the certificate for the server, and a certification authority root.
  • In most cases, this is because the certificate is not present in the trust store

• RemoteAccess VPN to ASA 2 7.2 using self-signed certificate

  Dear friends,

  I need help or guide on how to install as State in the title.

  It is this configuration can be made? or the self-signed certificate cannot be used as VPN certificate.

  Unfortunately, we cannot deploy a dedicated CA server.

  But we cannot use as pre-shared key authentication because the configuration would force our ASA to disable the 'disable isakmp am-' which is unacceptable according to our independent auditor.

  So the best solution I can think of is to use the self-signed certificate that is suitable.

  Please advice me if there is somehow I can use 'isakmp am - disable' as well as the pre-shared key.

  Can I generate certificate using my ASA box? or I really need to use the dedicated CA server to make it work.

  This is a self-signed certificate of ASA, but I can't import into my Cisco VPN Client 5.0 it keep saying "error 39: impossible to import the certificate.

  MIIGpwIBAzCCBmEGCSqGSIb3DQEHAaCCBlIEggZOMIIGSjCCBkYGCSqGSIb3DQEH

  .. .removed

  SdCTfNIaE11Fm + rOMD0wITAJBgUrDgMCGgUABBS6s9ZMs6MoqQ0tdZuKRZuebbE3

  owQU/z10f/Ew3XMfWBYSV5Eo3evqqgwCAgQA

  I will be very very grateful for any help provided.

  Best regards

  SAB

  SAB,

  You must have a separate server from CA to issue certificates for the client and register the ASA on the CA server.

  You cannot use the self-signed certificate on the SAA for the VPN client.

  See you soon,.

  Gilbert

• cannot install self-signed certificates sbs2008 on Vista SP2 with IE8

  I use SBS2008 Setup and it is to use self-signed certificates,

  My laptop is Windows Vista SP2 with IE8.

  When I try and connect to my OWA SBS2008 Web site, I get this error: there is a problem with this site's secure certificate.

  I tried to solve my problem with this solution: http://blogs.technet.com/b/sbs/archive/2008/05/08/installing-a-self-signed-certificate-as-a-trusted-root-ca-in-windows-vista.aspx , don't worry! In date; May 8, 2008

  I also looked at: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 932156 , dated; November 19, 2008

  This link is on the page above: download the update for Windows Vista (KB932156) package now. , dated March 24, 2008. I understand that all of the above links are ment to work with Vista & IE7, there is no mention of the Service Pack level.

  This patch really works on Vista SP2 with IE8 or do I have to change the registry and if so, this key is always the right pair?

  HKEY_CURRENT_USER\Software\Microsoft\SystemCertificates\Root\ProtectedRoots

  Thank you

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Faced with Windows 2008 R2 PKI, self-signed certificates & view iPad customer Secure Authentication to view connection server: UGH!

  Background: I was instructed to create a VMware View isolated laboratory test so that HIGHER-UPS can see how they could access the VM dedicated as well as how their developers could put related clones on-the-fly. The project was successful! Yay!

  Addendum: A boss wants to see how VMware View works when accessing his computer virtual dedicated via his iPad on the internet... And who needs a secure SSL connection.

  The problem is: the domain name I chose casually because the lab did not belong to me... So I can't have a real certificate from a trusted commercial certification authority.

  So I'll try to roll my own public Windows 2008 R2 PKI and... All that forcing the iPad to use DC/DNS server in the lab... Get only the single get iPad trust view connection server by importing a sort of certificate.

  Can I export/import a certificate of the CA of DC to the iPad via an attachment... And it happens with confidence. But how to create a login to view the server certificate and electronic-mail/import in the iPad so it happens with confidence? Whenever I try to export the certificate of the certificate of the view connection server store, send it to the iPad and install... The connection server certificate appears as 'not reliable' and the VMware View client will not connect.

  (Of course, I could get sloppy and set the iPad Client to accept untrusted connections... "But I want to solve the problem of approved connection).

  I could be missing something royally on the self-signed certificates and certificate chains.

  (It is a first for me dealing with Active Directory Windows Certificate Services. In the past, I always just installed expensive commercial SSL CA certificates in the certificates Windows Server stores before.)

  Any help or direction, you can provide would be appreciated. I'm rather confused.

  See you soon!

  Keegan

  Hello

  Maybe was your initial problem that the provided certificate must be a descendant of a trusted root, such as Verisign cert or

  the root certificate must be installed and all the intermediate certificates in the trust chain down to the one you use?

  Concerning

  AndyR

• Self-signed certificates Z10 blackBerry

  I try to lateral load of the self-signed certificates on the device for testing of the reasons (see various other misfortunes listed elsewhere).  Settings > Security > certificates he seems to have the ability to do.  I can't find any documentation as to where certificates must be located to be detected.

  Some research on Google mentioned something about the process in which concerns the PlayBook, but that requires that they be placed in the Cert folder on the device.  The Z10 is not this standard file and it is not possible (AFAIK) to create this folder at the root of the device.

  Thank you

  The Z10 has the same Cert folder in the same location as the PlayBook, and the installation of a certificate process is the same, so documentation on who should serve you well.

  The folder is visible through network sharing, when you turn on sharing in the settings and display from a PC on your network... in case it wasn't clear.

• Cannot install the Vcenter for Esxi 5.5. Windows 7

  Hi Experts,

  When I run the simple setup, it stops when tried to install the SSO, the message "cannot install the single sign on, this package is not compatible with your processor,..." I'm running a Lenovo T430, the processor in an INTELCore I5 vPro.

  I installed the client vsphere without problems. And I know that in the other lenovo T430 people install the VCenter correctly. I am running Windows 7 Professional.

  Any idea or solution?

  Thank you very much friends!

  Jesus

  Center Server is supported only on 64-bit Windows server in operating systems (see VMware Compatibility Guide: search guest conductor /)

  André

• Password incorrect keystore self-signed certificate?

  Hello world
  
  I'm starting to learn how to make the self-signed certificates using the keytool utility. I use the Keytool page to learn: http://download.oracle.com/javase/1.3/docs/tooldocs/win32/keytool.html
  However, I am having a problem with an error saying that my keystore password is incorrect?
  
  Here's what I do:
  -------------------------------
  C:\Program Files\Java\jdk1.5.0_11\bin > keytool - genkey - dname "cn = Paul Smith, or = myOU, o = myO, c = US" - alias psmith keypass - kpassword - keystore psmisth.ks - storepass spassword-validity 360
  
  C:\Program Files\Java\jdk1.5.0_11\bin > keytool-export - alias psmith-folder psmith.cer
  Keystore password: kpassword
  keytool error: java.io.IOException: keystore was tampered with, or password is incorrect
  
  C:\Program Files\Java\jdk1.5.0_11\bin > keytool-list - v - keystore psmith.ks
  Keystore password: kpassword
  
  Keystore type: jks
  Keystore provider: SUN
  
  Your keystore contains 1 entry
  
  Name of the alias: psmith
  Date created: August 2, 2011
  Entry type: keyEntry
  The certificate chain length: 1
  Certificate [1]:
  [...]
  -----------------------------------
  
  I tried to delete le.ks file and try again, but nothing has changed. I do not have any file .keystore in my folder.
  
  Why are told that my password is incorrect?

  When you exported the certificate you didn't specify the keystore file or the password for the keystore.

  keytool -export -alias psmith -file psmith.cer -keystore psmisth.ks -storepass spassword
  

• Self-signed certificate installed successfully but with VR error device

  HI gurus,

  I'm in the middle of the upgrade of RS 5 5.1 RS for replication of vSphere.

  I'm trying to install and register the device VR 5.1.

  On the configuration tab I filled out the Info: and tried to produce the certificate and start the service.

  It comes up with the following msg.

  Self-signed certificate installed successfully.

  WARNING: Bad service state: execv() arg 2 must contain only strings.

  The info I have completed are as follows:

  VRM Host: ip address of host vrm

  Name of the Site of VRM: virtual site of DR (FQDN) appliance

  vCenter Server Address: address of the server vCenter DR FQDN

  vCenter Server Port: 80

  vCenter Server Admin Mail: e-mail administrators

  Thanks in advance!

  Here's your answer...

  Edit the/etc/sysconfig/network/config file.

  Find this line:

  NETCONFIG_DNS_STATIC_SERVERS = «»

  Change the line and put a DNS server IP address in quotes.

  Restart your device and try again.

  Edit: Still one thing, make sure that you deploy the version of the appliance corresponds to your version of vCenter. vCenter Server 5.5 uses the replication device 5.5, 5.1 VC uses 5.1 etc.

• Cannot use jar with icon files gif and self signed certificate files (Exception in thread "AWT-EventQueue-3" java.lang.NoClassDefFoundError: oracle/ewt/laf/basic/SelColorChange)

  Hi all.

  I use Forms 11 g 11.1.2.1 and updating JRE 7 45.

  I have create a jar file containing gif icons files using this procedure:

  (1) create the jar file:

  set path = % path %; C:\Oracle\Middleware\Oracle_FRHome1\jdk\bin (my ORACLE_HOME/jdk)

  jar - cvf webfigolos.jar *.gif

  (2) self sign the file:

  c:\Oracle\Middleware\asinst_1\bin > sign_webutil.bat c:\Oracle\Middleware\Oracle_FRHome1\forms\java\webfigoicons.jar

  Jars is signed but with a warning:

  Generate a signature key certificate aaosa2015 = auto...

  keytool error: java.lang.Exception: key pair not generated, al alias < aaosa2015 >

  loan is

  .

  There are errors or warnings while generating a self signed certificate. Pleas

  e revisiting.

  .

  Backup as c: C:\Oracle\Middleware\Oracle_FRHome1\forms\java\webfigoicons.jar

  \Oracle\Middleware\Oracle_FRHome1\forms\java\webfigoicons.jar.old...

  1 file (s) copied.

  Signature using ke c:\Oracle\Middleware\Oracle_FRHome1\forms\java\webfigoicons.jar

  y = aaosa2015...

  .. own made.

  But I can use this file. The application crashes and get this error from the java console:

  network: connection http://myluism-pc:7001/forms/lservlet; jsessionid = p98GTL5Fh6XnQcykySBhLWq2823HwHlPGZ16TYHVv93006N4mmdl!-947562687 with proxy = LIVE

  network: connection http://myluism-PC:7001 / with proxy = LIVE

  Exception in thread "AWT-EventQueue-3" java.lang.NoClassDefFoundError: oracle/ewt/laf/basic/SelColorChange

  at oracle.ewt.laf.oracle.OracleTreeUI.createItemPainter (unknown Source)

  at oracle.ewt.laf.basic.BasicTreeUI._getItemPainter (unknown Source)

  at oracle.ewt.laf.basic.BasicTreeUI.getItemPainter (unknown Source)

  at oracle.ewt.dTree.DTreeBaseItem.getSize (unknown Source)

  at oracle.ewt.dTree.DTree.paintCanvasInterior (unknown Source)

  at oracle.ewt.EwtComponent.paintInterior (unknown Source)

  at oracle.ewt.lwAWT.SharedPainter._paintInterior (unknown Source)

  at oracle.ewt.lwAWT.SharedPainter.paintExtents (unknown Source)

  at oracle.ewt.lwAWT.LWComponent._paintComponent (unknown Source)

  at oracle.ewt.lwAWT.LWComponent.paint (unknown Source)

  at oracle.ewt.EwtComponent.paint (unknown Source)

  at oracle.ewt.lwAWT.SharedPainter.paintExtents (unknown Source)

  at oracle.ewt.lwAWT.LWComponent._paintComponent (unknown Source)

  This used to be a very simple procedure, but it has stopped working...!

  Don't know if the jar file is well born, or if it is corrupt.

  I can't start my application.

  Help, please!

  Best regards, Luis.

  Try again with the JRE 7 10 update, I get a problem with the update of JRE 7 45, but when I tried the update of JRE 7 10, it works fine.

  For the objective test, disable the check

  Java Panel-> advance-> mixed Code-> disable verification (unchecked)

• Creating a self signed certificate - how do you define the "storepass.

  Hi, I am trying to use ADT to create an AIR 2.7 file, but this is the first time I used the command line tool to build an and have problems to understand the process of signing.

  I can generate a keystore cert.p12 from the flash IDE, and it requires a password to the file (-storepass)

  I can also use ADT to create a certificate self-signed from the command line, you can specify here the - keystore (location cert) and - keypass (password for the key in the store)

  I can't find a way to generate a certificate self-signed, where you can specify the two passwords, one for the store (-storepass) and one for the key (-keypass).

  It is a problem because when I go to my file using ADT AIR package, it takes two passwords - storepass and - keypass seized may publish.

  Is anyone know how generate a .p12 self-signed certificate and have a control on the two keys...?

  I spent hours playing and research now so maybe the wrong end of the stick, could do with some help get beyond this issue.

  Thank you

  Sean

  There is that a single password is mandatory in package for ipa that until now I know

  Example of order:

  C:\AdobeAIRSDK\bin\adt.bat-Paquet - target the ipa-test - stores pkcs12 - keystore [KEYFILE] .p12 - storepassKEY PASSWORD] - set service-profile [FILE of AVAILABLE MOBILE] .mobileprovision [NAME of the IPA] .ipa [NAME of THE XML FILE] .xml [NAME of FILE SWF] .swf Icon_29.png Icon_48.png Icon_57.png Icon_72.png default Icon_512.png - Landscape.png default - default Portrait.png - PortraitUpsideDown.png default - default PortraitLandscapeLeft.png - PortraitLandscapeRight.png

• Cannot install the sample applications manually

  Hello

  I'm having a time difficult installation SDK push sample applications on a remote computer. I try a manual install of Tomcat. The machine runs on Linux Red Hat.

  The error I get is:

  [org.springframework.web.context.ContextLoader.initWebApplicationContext()] - Context initialization failed
  org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'registerListeners' defined in class path resource [sample-push-initiator-context.xml]: Invocation of init method failed; nested exception is org.springframework.transaction.CannotCreateTransactionException: Could not open JDBC Connection for transaction; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure
  
  The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)
  

  It looks like a problem with the JDBC connector, but I do not know how to solve. Among the things that I've done are:

  • Generate the database manually.
  • Fill the PushSDK.properties with the database and JDBC information. Copy this file in each directory WEB-INF/classes of applications examples of
  • Copy the mysql connector jar file in the directory WEB-INF/lib of each application
  • Edit the file app.properties with the information from my BB (app id, base url PGG etc.). Copied in the directory WEB-INF/classes of applications. I did the same thing with suspension - context.xml and app - context.xml
  • Edit conf/server.xml of Tomcat to set the http and https ports and the UTF-8 encoding for the request URL query component. In fact, I have only port 8080 available in the machine and I have configured HTTPS to work.
  • A self-signed certificate and shows its location in the conf/server.xml file. Indicates its location in conf/server.xml
  • Edit bin/catalina.sh to set the JAVA_OPTS UTF-8 encoding

  The initial Tomcat page seem to be working in https://machine_ip:8080.

  But there are errors with the BB apps:

  • https://machine_ip:8080 / sample-push-initiator returns 404
  • https://machine_ip:8080 / pushsdk returns 404
  • https://machine_ip:8080 / debug-Portal opens the Debug Portal, but displays the following message:

  Internal Server Error: 
  
  Sorry, we are unable to properly process your request at this time. Please contact a system administrator to investigate the problem by examining the logs.
  

  Does anyone have an idea of what's going on? I would be very help appretiate

  Best regards

  Maria

  Hi all!

  Finally, I could solve this problem. MySQL was not allowing the JDBC connection. I have

  delete the line:

  skip-networking
  

  in MySQL configuration file (/ etc/my.cnf) and now the sample applications seem to work ok.

  I still cannot subscribe to the good customer, but that's another story...

  Kind regards

  Maria

• TLS fails on linux self-signed certificates

  on firefox 38.1.0 under centOS 6.6 I have some problem with TLS.

  When it first happened I re fact cert using keys of 2048 bytes. It seemed if address the issue when you navigate to similar addresses to https://localhost/somesite, however, I have try https://localhost:10000 with the fact that it still fails:

  An error occurred during a connection to localhost.localdomain:10000. The certificate server included a public key which was too low. (Error code: ssl_error_weak_server_cert_key)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The signing certificate is algorithim-> PKCS #1 SHA-1 with RSA encryption

  The algorithim public key is-> PKCS #1 RSA encryption

  The key has been creating 07/06/15 for a period of 10 years is a Version 1 cert issued by myself with the info
  E = [email protected]
  CN = localhost
  UO = hq
  O = permite
  L = Stone Mountain
  ST = ga
  C = us

  It was a problem of webmin.

  To fix this /etc/webmin/miniserv.pem edition replace the cert and private key sections.

  Use a new generated key and self-signed certificate. If you follow the instructions of centOS, the location of the files are /etc/pki/tls/private/ca.key and /etc/pki/tls/certs/ca.crt

• I have a Proxy Server that uses a self-signed certificate, and I can't accept this certificate from Firefox

  I have Firefox installed 37.0.1 on OpenSuse 13.2. I have a proxy server that uses a self-signed certificate, and I tried to add my certificate to the list of authorities and to check all the option displayed to be wz trust no chance.

  I tried to restart firefox, but it did not help.

  I did the same steps in chrome and it works fine.

  appreciate any help.

  After removing my .mozilla in my home directory. Add the certificate to the list of authorities in fact work.

• DELETE A SELF-SIGNED CERTIFICATE

  Hi all

  We have just finished testing a new configuration on an ASA 5510 to connect no matter what. During testing, we used a self-signed certificate, but I now want to install a full certificate from a certification authority. The question is what is the best way to remove the old free generated certificate so we did not all conflicts during the installation of the new certificate?

  We are looking to Go Daddy SSL certificate, someone at - it other recommendations?

  Thank you

  1. The certificate (or more accurate: the trustpoint) is assigned to the interface. If you configure a new trustpoint to your new certificate and assign this trustpoint to your external interface, then nothing is in conflict. If you want to you can always use your certificate self-signed for the inside interface. But of course you can also remove it.
  2. There are so many cases that you can choose from. Some clients use me Entrust, other Thawte. I got mine from StartSSL. It's your choice. It's more about the cost and reputation.