Cannot install the vCenter Server on MS Server 2 k 12

Similar Questions

• Cannot install the vCenter Server 5.1 on Windows 8

  Compatibility with windows 8. Is it supported or not?

  Welcome to the community - vCenter only is not supported on WIndows 8 - http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software&testConfig=17

• vCenter install fails when you try to install the vcenter Server to the node of the PSC in HA mode

  Hi all

  We have two controllers on duty platform build in HA mode. We are trying to install the vCenter server and we get the error message below.

  VCSCAValidateRemoteSSO: Unable to retrieve the remote SSO version: 12029

  2016-03-30 17:07:16.656 + 11:00 | vcsInstUtil-2656758 | I: PitCA_MessageBox: Displays the message: "Setup VMware vCenter Server could not verify that the distance vCenter Single Sign-On Server is version 6.0.0 or later. Check if the Server Single Sign-On remote vCenter is accessible and is version 6.0.0 or later. »

  Has anyone in the community runs vcenter server 6 HA with PSC inspectors sitting behind the f5 load balancer? Please share your thoughts if you have seen a similar problem.

  Thank you.

  Hi all

  We are able to go beyond the question of the installation. We did the capture of packets on both ends and discover that the reset was issued the installer by the licensing vCenter service running on the PSC.

  We have also created firewall rules more 18 altogether since the server vcenter for our f5 load balancing program, then 6 VIP of the F5 on the two controllers on duty Platform.

  I hope this helps other people who sought to install PSC in HA mode.

• Cannot start the vCenter Server Service

  Cannot start the vCenter Server Service. To get this message to control the attached screenshot

  2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username

  2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified

  2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database

  This looks like a problem in the registry for the part of the database or a correctly configured system DSN.

• Cannot install VMware vCenter Server on a virtual machine

  Hello world

  I'm new to the forum. I try to install the vcenter server in a virtual machine.

  Configuration of the VM: 10G VMDK, used 7G... 2G memory... guest operating system is win XP Pro.

  When I run the Setup it says:

  This installation package could not be opened!

  I have attached a JPG of the error. Can someone please!

  Kind regards.

  64 bit is not supported as a host to vCenter operating system, see the compatibility guide posted above.  I would try to mount the ISO using the client machine instead of starting from the ESX host, it could be that your DVD image is not good.

• Cannot install the vcenter converter plugin.

  Dear team,

  I m cannot install the vcenter converter plugin, need help how to do the necessary, following is the blink of an eye, this virtual machine is not connected on the internet.

  

  

  need help how to do the necessary.

  Concerning

  Mr. VMware

  VCenter Converter 4.2 is on the vCenter Server installation Image:

  https://my.VMware.com/de/group/VMware/details?DLG=vc41_de&baseCode=ZHcqYmRwZUBiZHdlag==

  After you have installed the vCenter Converter 4.2 on the vCenter Server server, you can install the plugin converter on your desktop inside the vSphere Client.

  Concerning

• Cannot install the Vcenter for Esxi 5.5. Windows 7

  Hi Experts,

  When I run the simple setup, it stops when tried to install the SSO, the message "cannot install the single sign on, this package is not compatible with your processor,..." I'm running a Lenovo T430, the processor in an INTELCore I5 vPro.

  I installed the client vsphere without problems. And I know that in the other lenovo T430 people install the VCenter correctly. I am running Windows 7 Professional.

  Any idea or solution?

  Thank you very much friends!

  Jesus

  Center Server is supported only on 64-bit Windows server in operating systems (see VMware Compatibility Guide: search guest conductor /)

  André

• Cannot install the vCenter agent service. Cannot download agent.

  I have a little trouble with three of my ESX servers. I'm in vCenter Server 4.0.0 162856. I have three clusters that I am currently using. One is my cluster of blade test environment on our old equipment on our internal network (running ESX 3.5). One is our new cluster of blade on our internal network. The final (and) I have a problem) are the pole of blade on our external network. The new run ESX 4.0.

  When I tried to add new hosts to our new cluster of blade on the internal network, everything went relatively well. I am trying to simply add hosts to the cluster on the external network, but every time, I get the "cannot install the agent vCenter. service '. Error failed to download agent. I read on the web that this can happen sporadically and try to remove/put on your ESX servers. I tried with all three, and no download. I first thought that the hard drives of my hosts were too small because I am booting from SAN and dug 25 GB drives strictly to the operating system. So, I tried 50 GB hard drives, and that did not help.

  My guess is that it may be some sort of firewall issue and asked our network guys to unblock the ports 902, 905 and 8443. Still, this does not seem to help. I checked the file/etc/hosts and three servers, the vCenter server, and the server for the backup is defined in there. I also tried removing and time of the cluster. The only thing that does not work I don't know a ping servers that are defined in the hosts file works (but not other local servers) is vmkping, which gives a * not configured vmkernel stack * error.

  Someone at - it ideas? Do you think it's firewall or vmkernel associated? My understanding is that the vmkernel would begin after it is attached to a host, but I could be wrong on this matter.

  Thanks to all who help!

  There are also port 443

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Cannot install the vCenter 4.1 on Windows Server 2008 R2 Enterprise Edition 64-bit

  I have a brand new installation of Windows Server 2008 R2 Enterprise Edition 64 bit, but when I try to install vCenter Server 4.1, I get a window with the message following (screenshot attached):

  This product can only be installed on operating systems for 64-bit at the following address:

  Windows XP SP2 or higher

  Windows 2003

  Windows 2008

  I checked the compatibility matrix before I started and he says vCenter 4.1 is compatible with Windows Server 2008 R2. I checked the community boards and the knowledge base but have not met anyone else having this problem. Am I missing something, perhaps a Windows role or service before installing vCenter necessary?

  Is it a controller AD? You can not install vCenter Server on an AD DC.

  André

• Cannot install the Windows Server 2012, hard disk not found driver DC

  during the installation of the windows server Datacenter edition 2012 on HP desktop using a USB flash drive I do not get the list of the hard drive for formatting and install an operating system on it. Help, please.

  Server issues are better managed to the:

  http://social.technet.Microsoft.com/forums/en-us/home

  So please post your request there.

• Cannot install the vCenter 5.5 - error when installing the inventory Service (host name can not be null)

  Hello

  I tried to install a new vCenter Server 5.5.

  First, I installed SSO without any error. After that, I tried to install in Service of the inventory with the error "check SSO has failed."

  Can someone help me?

  Thank you!

  PS

  vm_ssoreg.log:

  [2014-01-13 07:12:01, 900 main com.vmware.vim.install.cli.RegTool of DEBUG] $Id: //depot/vicore/vicore-2013-rel/regtool/viregtool/src/main/java/com/vmware/vim/install/cli/RegTool.java#4 $

  [2014-01-13 07:12:01, 904 main com.vmware.vim.install.cli.RegTool of DEBUG] executing command: checkVersion d https://vm_ts_vcenter.domain.com:7444/lookupservice/sdk - version number 0 - c c:\users\admini~1\appdata\local\temp\1\{28d9c95c-f311-4368-a2ff-ffdf4d5bc8e4}\certs--insecurite

  [2014-01-13 07:12:01, 953 main com.vmware.vim.install.impl.RegistrationProviderImpl INFO] Initialization of provider of record...

  [2014-01-13 07:12:02, 707 main DEBUG com.vmware.vim.install.impl.LookupServiceAccess] Creating sales VMODL for LookupService

  [2014-01-13 07:12:02, 716 main INFO com.vmware.vim.install.impl.CertificateGetter] get SSL certificates for https://vm_ts_vcenter.domain.com:7444/lookupservice/sdk

  [2014-01-13 07:12:03, 140 main com.vmware.vim.install.impl.CertificateGetter of DEBUG] Establishing a connection socket to vm_ts_vcenter.domain.com/172.16.37.72:7444. Timeout is 60000

  [2014-01-13 07:12:03, 587 main ERROR com.vmware.vim.install.cli.commands.CommandArgumentsParser] Host name cannot be null

  [2014-01-13 07:12:03, 588 main com.vmware.vim.install.cli.RegTool INFO] Return code is: InvalidInput

  It's because of your host name vCenter containing underscore. VMware KB: vCenter Server with the host name contains underscore does not register in vSphere Web Client

• Cannot install the vCenter 5 on Windows 2003 Ent 64-bit

  Hello

  Anyone know what I can not install vCenter 5 Windows 2003 Ent 64 bit?

  I get:

  

  vCenter Server is not supported on this platform. Refer to the installation guide for the supported platforms list. Make sure that Windows is running not as a domain controller.

  I can confirm that is not running on a domain controller.

  Sen

  If you are running Windows 2003, it should be possible that your machine does not meet the req min for vCenter5 and could be less than 3 GB of vRAM and 2 vCPU as what Andre said.

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• Cannot connect to the vcenter until 10 minutes after the vcenter server computer starts

  I get the unable to connect to remote server message in vsphere client when I try to connect the server vcenter. However if I wait more than 10 minutes, I can properly connect to the vcenter server.

  Is there something wrong with it?

  And I wonder if the competent services to process the requests of connection on the vcenter server are not started immediately from the start?

  Where is installed your database? On the same box of vCenter server? If so, change the other boot option that delayed may not work because your vCenter will try to start before the database is online.

• Cannot install the server pack 1 SQL server 2008 on Vista

  When I installed the pack Server SQL server 2008 1 on Vista machine, I got error code 84B 30001.

  Hello

  It comes to the installation of vista operating system instance

  Try the SQL server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/