Cannot install XP upgrade after drive failure

Similar Questions

• Error code 10 cannot install Maxtor 3200 after power failure

  Original title: maxtor 3200 code 10

  After a power failure cannot not re install Maxtor 3200 get response Code 10

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you run the FIXIT from the link below and if it helps. You can also follow the manual steps and check.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Hope this helps and keep us posted.

• Satellite Pro L500 - cannot install the Realtek LAN driver

  Hi all

  I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

  The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
  When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
  which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

  If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

  Hello

  I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Reference Dell upgrade package cannot install the dell wifi driver

  Hello

  Since I reinstalled Window8 in my inspiron 3138, the laptop can not install the upgrade package from dell"and can not install my wifi driver.

  I can not install the following drivers and the laptop cannot detect WiFi at all.

  1704 Wirelss Dell Wifi driver (Network_driver_342TP_WN32_7.35.333.0_A01)

  Driver for the mod aircraft Dell (Network_driver_PX8MM_WN64_1.0.0_A00) switching

  Do you know how to solve this problem?

  Best,

  Lucy

  Please let me know which operating system you currently have on the computer. It's 10 or windows 8.1. Because the version you are trying to install is for windows 10. Also please go to Device Manager and confirm the card this wireless network adapter option.

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Cannot install the upgrade to Windows XP Pro SP1 of Windows XP Edition family with Service Pack 3.

  Cannot install upgrade

  The home computer has Windows XP Home (pre-installed) Edition with Service Pack 3.  Buy XP Pro SP1 update.  Can not install the upgrade, get the message: Setup cannot continue because the version of Windows on your computer is newer than the version on the cd.  I tried method 1, 2, 3 and 4 on how to remove Windows XP Service Pack 3 from your computer.  None of these methods works.  Y at - it software to locate and Uninstall SP3 so I can install xp pro upgrade, that I bought?

  Hello

  I suggest to Uninstall SP3 and retry the upgrade. When the upgrade has completed, you can download the latest Service Pack.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Restart the computer after the uninstall is complete and retry the upgrade.

  Important: Make a backup of your data before you uninstall the Service Pack.

• Cannot install for photosmart d110 driver because not digitally signed

  D110 Photosmart all-in-one.  Cannot install driver after running recovory disc.

  Windows 7 64 bit Dell Inspiron 580.

  I had to run the recovery disk after receiving the virus/malware.  It seems that all the other printer drivers are on my computer.  I downloaded the driver from HP.com several times and it cannot be found by my computer.  Manually, I tried to load it from the disc supplied with the printer and got the following error message: "cannot install driver because it is not digitally signed or not signed in the appropriate way.»

  We could continue, while reinstalling Windows would finally settle the matter. If you believe that the issue is related to the virus, you can run a scan for viruses on your computer using any anti-virus software you have. After that, reinstalling Windows could be the next step.

  Alternatively, you can try to install the printer in Mode safe, if you have not already.

  If you could mark a message with the accepted Solution if I helped you, would be great!

  Please let me know what happens. Thank you!

  Mario

• Satellite C660D - cannot install Wireless Lan / WiFi driver

  recently I had to reinstall a satellite c660d (amd processor) with windows 7 from dvd. installation disk hard form was not possible more. Problem is that I can't install a driver from networkcontroller and also card wireless network does not work. I tried to install several drivers (also driver wireless lan) form Toshiba site but without success.
  Internet only works with cable. Can someone tell me what drivers/software I need to install in order tot install the good networkcontroler and wireless lan?

  Did you sort it? Mine is same after windows 7

• Satellite P105 - cannot install the nVidia display driver

  I tried to complete the download several times for the nVidia Display Driver 9.7.5.4.

  First where installation is not complete citing «that this computer doesn't have the correct material...» ', then the Windows message came and said that "If this configuration is not completely successful click blabla" and I did.
  Now when I run the installation it always stops in the same place. But now it is said that * "Setup cannot be performed because this driver only works on Windows Vista, and is not Windows Vista. But the thing is I have Windows Vista! *

  Current display driver: Mobile Intel (r) Express ChipSet Family 945GM

  Laptop model: Satellite P105-S6177

  Operating system: Windows Vista 32-bit

  Hello

  > Current display driver: Mobile Intel (r) Express ChipSet Family 945GM
  And then you want to install a nVidia display driver?
  LOL :D

  I think that you can not install a nVidia display driver because your laptop is equipped with an Intel chipset and graphics card.
  You will never be able to install nVidia display driver and thus make the message that you do not have the correct material.

  Intel and nVidia graphics cards graphics cards are different things, so don't mix do not!
  Some P105 was equipped with nVidia cards and others with Intel card and it seems that you have an Intel card.

• My printer hp deskjet 3650 printer cannot install successfully. Printer driver cannot be found.

  My printer hp deskjet 3650 printer cannot install successfully. Troubleshooting result indicate that the driver printer cannot be found.

  Hello

  1. who is the operating system installed on your system?

  2. did you of recent changes to the system before the show?

  3. What are the troubleshooting steps you have done?

  4. do you believe that no matter what exclamation point in Device Manager?

  5. How do you install the printer?

  6. are you using the CD or downloaded the printer drivers?

  7. What is the full error message?

  Method 1: Uninstall the drivers and install the drivers.

  Note: Follow the below link to download drivers and also to choose the version of the operating system installed on your system.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=304535

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  In addition, check out the link below and check if it helps.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=34773&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=304535

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/471d1c5f-0939-4601-a6b2-146e147c90c8/

  Let us know if it helps.

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• CRAVING for laptop - 13-d000nx: cannot install Windows 7, wonder driver CD/DVD (HP ENVY 13)

  Hello

  I WANT to HP for computer laptop 13-d000nx, comes with windows preinstall 10 64-bit, but I need to install windows 7professional. When I m installing from dvd, after the start of the process it is to ask for the readers.

  Please guide me how to install the OS and that pilot she asks.

  Hello:

  The only other suggestion I can offer would be to see if it works...

  I discovered that apart Intel chipset USB 2.0 support Skylake chipset.

  Sense that normal USB install windows will not work.

  ISO Windows Microsoft not drivers USB 3.0 natives.

  Therefore, add USB 3.0 drivers in Windows ISO.

  Intel has on it.  They have a utility that does all the work for you.

  ndows-7-USB-3-0-Creator-Utility https://Downloadcenter.Intel.com/download/25476/Wi

  Run this and the point on your media Installation USB and if all goes well, Windows 7 will be installed.

• PS CS5: Cannot install the upgrade Camera Raw

  I have a valid copy of CS5 and I can't install the upgrade.

  Post edited by: Melissa Rios

  Help > function Update is more communicating with the server. You will have to do this manually.

  The last cab for CS5 is 6.7.1 download the and if you have Windows, right click on the installer and select run as administrator

  PC Adobe - Adobe Camera Raw and DNG Converter: for Windows: Camera Raw 6.7.1 update

  Mac Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Camera Raw 6.7.1 update

  Gene

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.