Cannot join or make calls after agreeing in beta for group video calling on mobile.

Similar Questions

• G480 - cannot start Dolby Home Theater after upgrade Windows 10 for g480

  Does not start after upgrade to window 10 for my portable home dolby cinema g480. can anyone help? cannot find the driver on the Lenovo Web site

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Dear Sir

  Welcome to Lenovo Community

  There is no driver for windows 10 for your machine but let try 2 ways, all first try to install the windows 8.1 driver it may be helpful (see below):

  http://support.Lenovo.com/eg/en/products/laptops-and-netbooks/Lenovo-G-series-laptops/LENOVO-G480-No...

  or try the same 10 windows-compatible driver from the below link from driver identifier (when you open the link you will be asked your name & e-mail, you can use fake ones then next page choose non-commercial usage and then from the first link, hope this will work with you,

  http://www.driveridentifier.com/scan/download_file.php?URL=http%3A%2f%2Fcdgenp01.CSD.Toshiba.com%2fc...

  If its is not working so the best solution is to go back to the previous version of windows

  awaiting your response

  Good luck

• Cannot find the configuration file after extraction of download for Windows 7

  I have a MFP HP LaserJet 1319f.  The installation disk supplied with the printer won't work with Windows 7, so I downloaded a program from HP.com.  I have a 64-bit operating system.  Download was successful, the extraction was a success.  Installer never started, and I'm not.  Printer has already been installed on the computer, but I want to print wireless.  Any suggestions?

  Hi Coachb714,

  This printer is not a wireless printer. The only available for this printer connection is USB.

  Connectivity

  Connectivity

  Open the USB port

  RJ - 11 fax port

  RJ-11 phone line-out port

• several times I tried to make a dvd for my video which is 2 hours of that time it hanged after 70%

  several times I tried to make a dvd with dvd creation for my video which is 2 hours of that time it hanged after 70%

  Just a thought...

  Did you get satisfactory results when you save shorter projects?

  It might be worth a try to use a double layer DVD.

• CS6 install on a Mac after running the beta version

  I try to install the version of Photoshop CS6 on a Mac Pro after running the beta for the last months and can not install because of a few remaining pieces of the beta. How can I remove all the pieces and parts of the beat just the installer of version release?

  This staring at me.

  I found the uninstall script and was able to remove the old preferences.

• DEFY: Cannot make calls...

  Hello

  I just bought Defy and I think that it is large, has many interesting features, but it does not call...

  About 10 minutes after it's turned on, I can't make all the calls (from widgets, dialer, contacts...). As soon as I press the dial button, a pop-up says "call time 00:00. And then the call is terminated.

  So I decided to 'factory reset '. But even after factory reset, this question is reproduced.

  I have attached two files: one is the journal when I can make a call and the other is there is not possible to make calls.

  A fact interesting, is that each time I start up (or factory reset) the phone, I can make calls for 10 minutes (approximately). After this time, if I want to call again, I have to start up the phone once more.

  To receive calls/SMS, it works fine.

  I think this phone is great, and I don't want to give it up.

  Can someone help me please?

  Thank you.

  I just found the answer.

  The problem is how Android deals with 'Blocking' and 'call forwarding '. If you try to change the settings, you can never reset these settings again...

  I tried to use my SIM card from mobile phones very simple, and all show me the message "you can not call so that the call blocking is active... ». But I never changed the settings...

  This also occurs with other suppliers of Android.

  The only solution is: go to your company and ask them to change your current SIM card to a new (not your line number, just the SIM card). And do not use the "call forwarding" and "call blocking" in Android

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• I can receive but cannot make calls from Mac

  Hello

  I try to have calls using my iPhone connected to my MacBook Air, but I have this message "your iPhone should use the same iCloud and FaceTime account.". This is something that surprises me because I can receive calls from my MacBook, but I can't make calls from my MacBook. There's someone who have / had the same problem?

  Thank you

  CO

  OS X El Capitan: use your Mac to make and receive phone calls

  Make calls

  FaceTime: Enter a phone number in the search field and then click the Audio button or click on Audio to see your recent calls.

• BlackBerry smartphones I can make calls but cannot receive anything?

  Sunday night my friend tried to call me, but my phone never rang, and when he sent me a text message telling me that I called my phone from the home line. And when I called him a busy signal? but I can still make calls phone just can't receive them. As the title of the post is. Nobody knows what is happening, or it's never happened to you? I have never dropped my phone in a place dry or wet area also and on the battery litmus paper is red, but which does not affect the phone or just the battery?

  in any case if someone has or has had the same problem and knows what it takes to this topic please answer as soon as POSSIBLE.

  Thank you

  Nick

  OK, your phone is a Blackberry 8130, in any case, go to the store and ask to solve the problem, if they have no solution, ask to change device

• RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after the windows xp registry.

  RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.

  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How to use or implement an ICS on my computer (or maybe Xbox) so that I can make calls using my phone VOI?

  My provider of VOI (BasicTalk) informed me that I could filter my phone via my computer using an ICS. My phone receives calls but I cannot be heard when I try to call. I live far, far in the glue... can't even get cell phone service and I had to get internet through flat (hughes aircraft). I mainly use the CAR phone as an answering machine... when a call comes in, I play back, the message, and then sink 25miles into our nearest town to get cell phone service and make my calls by cell phone. I have no other options available for the telephony service. It's obnoxious, but that's all I have right now. I knew that the CAR would work this way, but I decided that it was better than nothing. When I discovered that my son is able to use its earpiece via Xbox Live and has no trouble at all, I thought that there must be a way around this problem. So I called basic talking and they told me that it was no help... after that I begged for help, they finally checked around and advised I could use a VOI and gave me this address Windows. I found the site of ICS, but still don't know how to use the phone on this system... Any ideas or suggestions? Any help would be greatly appreciated!

  Hi Rhonda,

  You can, see the following Microsoft article and check if that helps.

  Using ICS (Internet Connection Sharing)

  Keep us updated on the State of the question

• Windows Media Player makes calls of NOR-fast Motion (Revisited)

  About 2 years ago, I posted a message on this forum about a condition where running Windows Media Player increased the rate that my Visual Basic 6 program has been able to contact a PCI-7344 Panel using calls OR-Motion (original post). To summarize the post, my VB program be called functions OR-Motion speed after that the computer is started and simply in the process of running Windows Media Player would allow my program make calls of NOR-faster Motion. I created a program demo, posted and was able to reproduce the situation constantly using several different computers & cards PCI-7344. However, no one at National Instruments could reproduce that; It seems that the calls function always ran fast for them and never ran slowly. I finally gave up and let the issue of dying and said reluctantly, our customers just start WMP to increase the speed of the machine.

  Now, I'm working on rewriting the software to the machine using VB.NET 2008 and Windows 7. My first hope was that the problem had gone with either the new VB, or Windows 7, but that doesn't seem to be the case. When I was with Windows XP, I could get recall for an improvement of the functions running WMP. With Windows 7, I can not get the increased rate even after the execution of WMP.

  Today, I took two new computers identical and loaded Windows XP on Windows 7 and one on the other. I put a new PCI-7344 card in each computer. I then installed version 8.2 of NO-Motion on each. With the exception of Microsoft .NET 3.5, which is necessary for my test VB.NET program, no other software has been installed, do not even Visual Basic. I started on each PC, ran my test program to determine the calls/sec, start Windows Media Player and my test program is represented. Here are the results:

  Test Windows XP & VB 6 program-128/s before launching WMP, 1024 Kbps after the execution of WMP

  Test of Windows XP & VB.NET 2008-128/s before WMP program, 1024 Kbps after WMP

  VB 6-256 calls/s before launching WMP, 256 Kbps calls after execution of WMP and Windows 7 test program

  Windows 7 test program and VB.NET - 256 Kbps calls before you launch WMP, 256 Kbps calls after execution of WMP

  As you can see, WMP has increased the rate of call of function OR-Motion on Windows XP, but has no effect in Windows 7. In addition, it did not matter which version of Visual Basic has been used.

  My first question is: what determines the rate at which he called on a NOR-Motion function? It seems that the maximum is 1024/s, which is consistent with what I saw 2 years ago even on slower computers. I would have thought that would be a faster PC function calls could also be made faster, but appears not to be the case. And is there some significance at 128, 256, and 1024 rates?

  My next question is: someone at - it else noticed faster or slower speeds using NOR-Motion after moving to Windows 7?

  The software that I work on the controls, a machine used on a production floor where the cycle time is critical and even save a fraction of a second can be important. With Windows XP, we have reduced the cycle time of 5 or 6 seconds by running WMP. We would like to start using Windows 7, but we won't be able to if it means cycle slower times on our machines.

  The source code for VB 6 and VB.NET 2008 for the demo program is attached. This is the computer that I used for the test today, but I was also able to reproduce this on computers Dell, LS, Xycom and Allen-Bradley. I also used several different versions of NOR-Motion and WMP with the same results.

  
  

• Error message appears when you open the link to Web sites in Windows Mail email: "windows cannot find [URL], make sure you typed the name correctly.

  Until a week ago, I got no problem with opening links in e-mail messages in Windows Mail.  I suddenly had problems with the opening of all the links in e-mail messages - when I click on the link, an error message reads "Windows cannot find [url], make sure that you have typed the name correctly and try again"... a window then opens with a white screen.  But it is not a problem at the opening of the page if I paste the link to the window.

  I also noticed that the problem resolves after a few attempts to open multiple links.   But after the reboot, the problem arises again.

  I am currently using Windows Vista Home Premium with Windows Mail; did an update today with Service Pack 2, ran full scan of the system with Norton (no virus) and did uninstall the Yahoo and Google toolbars (recommended by David O - engineer Microsoft Support responses - to another user in this forum with similar issues).  And I still have the same issues.

  THIS PROBLEM HAS BEEN RESOLVED - DUE TO INCOMPATIBILITY ISSUES BETWEEN SP2 AND NORTON.  UNINSTALL SERVICE PACK 2.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help to make calls in blackberry

  Hello friends,

  I need your help to make calls in blackberry OS version 6.0 and later versions.

  I write code to use, it works very well below 6.0 but on 6.0 and above all he does not.

  When I try this code on 6.0 I receive "cannot connect, call in progress.

  According to my research, this is a specific problem of the OS, but I'm not satisfied with this research.

  Actually I do an application that will dial a specific number again and again for 5 times ({at least} chosen by the user).

  Code: -.

      Application.getApplication().invokeLater(new Runnable() {
  
              public void run() {
                  try {
                      ApplicationManager.getApplicationManager().requestForeground(appProcessId);
                      Invoke.invokeApplication(Invoke.APP_TYPE_PHONE, new PhoneArguments(PhoneArguments.ARG_CALL, phoneNumber));
                            } catch (Exception ex) {
  //                    ex.printStackTrace();
                  }
              }
          });
  

  To resolve this problem, I tried for a few weeks, but no luck.

  Please help me.

  Thanks guys,.

  I found the solution to this problem,

  to fix this, I maintain a difference of 10 seconds on each call, I did.

  Thank you once again