I can receive but cannot make calls from Mac

Similar Questions

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• Cannot make calls from

  OK, so I'm new to Skype, I did the profile, it is 80%, I added a subscription - he says still Skype credit sucks do not know if it is normal, but I can't make a call... the person should add u before you can call?

  Hello
  Unfortunately you have not provided sufficient information to enable us to answer you. Please indicate your request in detail.

  1. What subscription you have?

  2. in which country are you trying to call?

  3. you try to call from Skype to Skype, a fixed line or a mobile phone?

  Thank you.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Microphone on TO will not reactivate what cannot make calls from

  newly purchased SE [3 weeks] has all of a sudden today mic on mute - will not turn on!  Callers can't hear me and I can't make outgoing calls.  Any help is greatly appreciated.  Thank you

  First of all, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again. You won't lose data, but it can cure a few glitches.

  If this does not work, set it back to factory settings and restore it again form backup, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If it does not, you will get the phone repaired.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• Creating space where video clip can pass, but cannot go away from this area

  I want to do something first film line mobile must in second video clip, but can not go far from second video clip.

  stage.addEventListener(KeyboardEvent.KEY_DOWN, starMoving);
  function starMoving(event:KeyboardEvent):void
  {
       switch (event.keyCode)
       {
            case Keyboard.UP : star_mc.y-=10;
            break;
            case Keyboard.DOWN : star_mc.y+=10;
            break;
            case Keyboard.LEFT : star_mc.x=star_mc.x-10;
            break;
            case Keyboard.RIGHT : star_mc.x+=10;
            break;
            default:
            break;
       }
  }
  

  So this is the code to handle the first movie clip... I can go anywhere on the scene...

  How can I do, then the first clip from movie sets just in second?

  Thank you.

  Whenever you move, you must test the extensions to see if you are still within the limits. I'll use the right for an example, you can do the rest.

  case Keyboard.RIGHT :      star_mc.x+=10;     if(star_mc.x + star_mc.width > containerClip.x + containerClip.width){          star_mc.x = containerClip.x + containerClip.width - star_mc.width;     }     break;
  

• I can receive but can't send emails

  I have an Air of IPad and IPhone 6. Both have iOS 9.3.1. I have 2 email on both accounts: one works very well. But the other, BTInternet, I can receive but not send emails from a device because "your user name or password are incorrect.  However, I can send and receive emails from this account on my computer.  I tried to change password and the removal and reinstallation of the BTInternet account without success.  BTInternet says there is a problem with Apple devices and they can help.  Any suggestions gratefully received.

  Check the outgoing mail server setting. Make sure that your user name and password are there.

  Settings > Mail, Contacts, calendar > e-mail > account > outgoing mail server - tap the name of the server next to SMTP check in the main server and make sure that your user name and password are entered and exact - even if it says that the password is optional.

• Phone calls from Mac

  We can make calls from mac, mac is on ethernet and iphone in wifi (with the same network).

  I tested it and it works. What I did:

  First of all, I activated the WiFi and ensured that it connected to the same segment as the iPhone. Tested a certain number, and it worked.

  Later, I turned off the WiFi and checked that we are always on the same subnet as the iPhone.

  Tested the number and it worked again.

  Leo

• can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  1. make sure that the information entered in the transmission & reception area in settings - Messages is correct

  2. If so - settings - Messages - switch off

  Log settings - iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  Hello markward4905

  You should be able to download the drivers from the website of the manufacturer of your web cam.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I can receive, but not send. Error (0 x 80004003) occurred after sending photos from Picasa.

  I get the following error in WLM: 0 x 80004003 while trying to send messages.  I can receive, but not send.  Error occurred after sending photos from Picasa.

  Delete the emails in your Outbox and close Windows Live Mail. Open Windows Live Mail and send a test message to yourself. Is the problem solved?

• I can receive but not send emails and already tried the tips of help page

  Hi, I just changed my Apple Mail to Thunderbird and I with my two suppliers (a University for work-mail server) and an e-mail provider in Germany for private messages, I can receive but not send messages. I tried everything on the "can't send messages" page https://support.mozilla.org/en-US/kb/cannot-send-message, it doesn't work.

  I use Mac OSx Sierra on a Macbook from 2012. Thanks for your help!

  These parameters appear to be good. It is rare that someone looking for help provides useful information you have with these screenshots. Awesome.

  Cannot send mail has a bit more troubleshooting info.

  Make sure Thunderbird is in online mode, not in offline mode: click on "file-> Offline; "Work offline" must be unchecked.

  Temporarily disable anti-virus & firewall and test sending.

  Disable all modules of Thunderbird and test sending.

  Beyond that, I am unable to help him.

• I never had trouble with my server out log out before. I'm travelling and my first day I can receive but not send mail. I went through all of the suggestions of support, nothing helps. I can not send emails. I El Capitan on my Mac

  I have a macbook of El Capitan and my first day on vacation to halfway around the world, I can receive but not send emails. I had a conversation with my provider and all the settings, usernames and passwords are correct. I tried everything I read so far related to this topic from Apple and I can not send. Any other suggestions?

  What happened to me several times over the years, as different local networks may not connect in order to SEND email but without reception problems.

  My solution is to always use the WEBMAIL service belonging to the service of your email provider... be it Apple or Blueyonder, or anyone.

  Occasionally, a national internet service - for example; the Sultanate of Oman, in my experience - can refuse to deal with mail because the discussion on a particular topic is not permitted in the jurisdiction of that country, but it is very rarely the problem. Try just using the webmail online pages - for example; webmail service to iCloud in the case of an Apple (.mac, .me, .icloud) email address - and who usually works for me, anyway.

• I can receive, but not send email on my account, which worked fine before now. MOVED TO THE COLLEGE!

  Hey... I just moved in College, so my laptop can receive but can't send e-mail.  I have an internet connection, it is not my ISP...

  When I click on "send/receive all", I got these two messages:

  The connection to the server has failed. Are subject: Greetings from home ', account: 'pop.dejazzd.com', server: 'smtp.dejazzd.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  The connection to the server has failed. Account: 'pop.dejazzd.com', server: 'pop.dejazzd.com', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  Any advice?  In addition to throw my computer out the window?

  It is possible that your school is blocking SMTP traffic, but probably that's because the Windstream does not accept SMTP traffic that came from a system that is not on their network.  I was not able to determine the policy of the air current, but it seems likely, that is the reason.  You can contact the WindStream support and see if they will tell you if this is the case or not.

• I can see, but cannot import/open some files.

  I bought Lightroom 6 a few weeks ago. Summer helping another photographer to edit and she a LR5, beloved. I was editing wedding photos and doing great, until I arrived at the reception. I have a few folders of them since a couple of times, I changed the SD cards. On the first record of them, I can click/Open the first 42 photos, and then the rest I can see but cannot click. What could be the problem? Thank you!

  What do you mean by "do not click on '?

  You see the pictures in the import?

  You import directly from the camera?

  Have you tried another way to import (i.e. the copy on the desktop with the browser and import from there?

  What is the file type and the source (camera), your operating system?

• Error code: 0x800CCC0E and can receive but not send emails in windows mail in vista.

  Original title: can receive but not send emails in windows mail in vista.

  I have vista and windows mail.  I can receive emails, but all of a sudden I can't send email.  The connection to the server has failed. Subject ' Fw: Urgent warning... We must prepare!', account: 'incoming.yahoo.verizon.net', server: 'outgoing.yahoo.verizon.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  Set up Outlook Express, Windows Mail or Windows Live Mail for Verizon-Yahoo
  http://help.Yahoo.com/l/us/Verizon/mail/YAHOOMAIL/pop/pop-08.html

  If all the settings are correct, turn off e-mail scanning in your antivirus software. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.