Cannot load Windows

Similar Questions

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Cannot load Windows 7 - Satellite C660 guard freezing

  Hello world.

  This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop without Windows installation disc. Last week, it has become very slow, the interface resembles that of the interface of safe mode, then finally, he became completely unresponsive, therefore, through F8 on start-up I selected the option to return to the factory settings (I have this option)

  The BACK screen appeared and started normal loading then who responded, then I rebooted only to see Windows starts for the first time and carry the load, before that I had to create a cd boot from my other laptop to reboot the system that I had lost the boot mngr.

  The last part of the installation process begins whereby a white Toshiba screen appears with a green progress bar which is responsible for some drivers (see attachment). There are 39 steps to this process and I remember before the computer should keep restart itself, but it keeps freezing after about two steps. I kept turning it off and eventually the locked system administrator accounts.

  Once more, I restarted the PC, but this time in safe mode, the operating system did in fact load in safe mode and I created a few new accounts with administrator privileges, however, I still cannot load all of the operating system because it keeps freezing during the last part of the process.

  I have very limited knowledge of loading operating systems, so any help would be greatly appreciated.

  Hello

  First of all, it was a big mistake NOT to create a recovery disk Toshiba.
  The recovery of HARD drive that you were able to start pressing F8, is only possible if the HARD drive is not defective.
  I think in your case I think that there is something wrong with the HARD drive because there was a Bishop of startup notification which means that this laptop can not find a boot manager to boot the system.

  I have no other idea about trying to reinstall the system using the Toshiba Recovery disk or another drive in Windows 7 (of course if you have one)
  If the recovery fails, you will need to investigate on how much material could be affected. I think in this case it of needed to start with HARD disk check.
  Possibly the HARD drive needs to be replaced. Of course it is possible that I m wrong part is affected, but at the first step you should check the new installation of the OS.

  A recovery disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Cannot load Windows 8 Appstore

  I'll try to open the app store, but it gets stuck just loading forever. After some time, he will say something on it does not either due to a server error or network has expired. But I know that's not my internet because I fast fiber WiFi

  Hello

  Since when are you facing the issue?

  There could be several reasons why you cannot open Windows store. It could be because of the proxy connection or any what third-party antivirus or because of the cache store.

  I suggest you follow these methods and check.

  Method 1:

  Disable the proxy connection

  If you use a proxy connection, and then follow the steps to turn off the proxy connection.

  a. click on the gear box in the upper right corner in Internet Explorer.

  b. click on Tools and then click Internet Options.

  c. click on the connections tab, and then click LAN settings.

  d. uncheck it use a proxy server for your LAN box.

  e. click ok.

  Method 2:

  Disable the third-party antivirus software

  If you have any third-party software installed on the computer, then I suggest you to disable the antivirus software and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I suggest you to clear the cache to store and check.

  Follow these steps to do so.

  (a) on the screen, press Windows key + R to open the Run dialog box.

  (b) type WSReset.exe and press enter.

  Reference:

  Why can't I connect to the Windows store?

  http://Windows.Microsoft.com/en-us/Windows-8/why-sign-in-Windows-store

  Let us know the status of the issue. We would be happy to help you.

• Laptop cannot load Windows 7

  After attempting to clear the password at startup in the BIOS I was going into a more serious problem. Whenever I try to turn on my laptop it appears a black screen saying: "cannot start Windows. A recent hardwqare or software change might be the cause. "And there are two options, repair and start Windows normally. So I chose the repair, but it just goes to another black screen saying "Windows was able to start" and has instructions on how to "fix" the problem. At the bottom it says "status: 0 x 0000225 Info: the boot selection failed because a required device is inaccessible. Also, when I pres "Start Windows normally" the Windows 7 Logo flashes and then after a second, it allows just the black screen, I described above.

  Here's what I think has caused:
  When I was trying to get into the BIOS, I entered another Menu by pressing F10. It is the recovery of the system, according to me. Then he said something on three partitions. I used to have three partitions, a Local, recovering HP and one for my records. But then I got rid of the partition for recording and has developed at a Local level. So, I am confused on why he said there were three partitions. The system recovery may have done something for the operating system. When I press F8 and go into options it also leads to the black screen, especially the Safe Mode.

  Thank you!
  I need to fix this ASAP, and I am not system restore I have many family Photos.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the rescue CD in Notepad and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  DiskPart

  list disk

  select disk x (where x is the number of the disk to the partition is on - probably 0 (zero))

  partition from the list

  
  Post back with all the details of all the partitions that are shown.

  Kind regards

  DP - K

• Cannot load Windows Live Photo Gallery

  Original title: Windows Live Photo Gallery

  I am only able to load Windows Photo Gallery, not the Windows LIVE Photo Gallery I want. I have Windows Vista.

  Hi hobiesailor,

  1. have you installed Windows Live Photo Gallery?

  If you have installed Windows Live Photo Gallery, and then you get any error when you start?

  If you have not installed Windows Live Photo Gallery, then we recommend that you download and install Windows Live Photo Gallery to access, or provide us with more details on the issue, so that we can help you better.

  See looking for Windows Photo Gallery?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot load Windows 7 using Boot Camp

  I am also unable to load Windows 7 on my MacBook using Boot Camp. When Boot Camp prompts Windows Setup disc, I put in the disc of Windows 7 Edition complete software Home Premium that I bought, and then my MacBook again request the Windows Setup disk and ejects the disc of Windows 7 Home Premium. On my MacBook, I have OS X version 10.8.2 and I've updated memory to 4 GB. What I am doing wrong?

  Delete and re-create the Boot Camp partition. If this does not work, use the Boot Camp Assistant to create a bootable copy on USB and use it to boot from to start the installation.

• Qosmio F - cannot load Windows or anything

  Yesterday, while studying the other day outside another student struck the table on what I was studying. I would say 'typed' as it was not so difficult. The normal message where it says that the laptop will move the hard drive to a place course, etc..

  Shortly after maybe 10-20 minutes, I get a message on the screen of the laptop asking me to 'save the laptop', because there was a major error or failure. I clicked on the 'further information' and he said basically all my C:, G: readers and everything I had failures of the disc or something. Not able to backup of the laptop as I have no CD present themselves to back up with I got it home I do today.

  The laptop won't load even in windows at the moment. Cannot back up or anything like that. Custody of loading in the options of the system repair, restore, etc. memory diagnostics help nothing.

  I only bought the laptop since oct/nov 2010. NA not start using it until January/February of this year. Should I try to open the disk HARD as he might have loosened out back or? Should I send it to the manufacturer to look? It's time for critical review for me and that's devastating! Also flight overseas late June after exams and wishing to take the laptop out there. Help, please! Thanks for all the tips and suggestions.

  Hey Kyo,

  Your ad is a little hard to understand and a screenshot of the error message would be useful, but if you get a message on the failed HARD drive and all partitions, please contact a service provider authorized in your country.

  Your laptop should still be under warranty, so guys can replace the HARD drive for free. If you need some important data, you can ask if they can save some files and make a backup. An alternative you can try it yourself if you buy a box for example external HARD disk. Then you can connect the USB HARD drive on another computer.

• Cannot load Windows 7 after installation of 2 critical updates (KB2436673 & KB2296199) - 0x800f0816 error Code

  At 03:00 today, my computer automatically up-to-date with 8 updated reviews.  The computer unused satellite, power, up to 15:00 when I got home, date on which windows was trying to 'fix', because windows could not be loaded.  I did a system restore to a point before the updates were installed (02:00).  Goodbye My observer of events and concluding that none of the updates have been installed correctly, I have taken note of the errors for each (most were 0x800f0816, but we've been 0 x 80242016) and went through each update individually and install.  Two of these updates will not be installed.  After the system restart after installing, windows attempts to load.  The system automatically restarts and begins to repair windows.  Windows repair indicates that the system cannot be repaired automatically.  I chose a restore point from before the 'bad' updates are installed, and everything is fine.

  I get the same error for the two KB2296199 of KB2436673 & failed installs: 0x800f0816.

  Is it possible to fix this?  Or I'm just not going to install it these updates?  It is a newly built computer (last week), all the new kit stripped of equipment, new OS.  I have very little installed on this system.  I found no information regarding this error code or the latest MS updates online, or if anyone else has similar problems.

  Any response would be appreciated.  Thank you!

  J.

  Of course, if you cannot start the computer, uninstall the updates would be moot & system restore (or 'last good' known) would be your only recourse.

  Again, see http://www.microsoft.com/security/pypc.aspx

  Welcome & thank you for your comments. Happy Chrismakwannukah!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot load windows xp Sp3

  Hello, my computer started to freeze up .so I reinstalled windows XP Pro, and when installing windows auto update attempted to load the SP3, it continues to stop in the middle of the process to unidrv.dll and a box pops up saying cannot find file and I have to close the desired. I tried this many times without success. Can someone help me solve this problem?  Thank you, Bob

  Try a fix it

  http://support.Microsoft.com/kb/949377/en-us

• Satellite A305D-S6848 does not start - cannot load Windows

  The DISPLAY SHOWS "Windows failed to load because a required file is missing or corrupt... »
  file: ntoskrnl.exe
  status: 0xc0000098

  I DON'T HAVE AN INSTALLATION DISC, AND DON'T KNOW HOW TO GET SYSTEM OPERATIONAL RETURN?

  CAN SOMBODY IF YOU PLEASE HELP ME?

  Hello

  There seems to be a series of Toshiba laptops we and that's why the recovery process can be different on Toshiba notebooks European

  However, the recovery procedure must be mentioned in the manual of the user. Check this box

  First try this:
  Switch on and press F8.
  Select Safe Mode, and then try to start the Windows mode without failure.
  If this does not work, try to repair the computer option.

  I think the laptop must be equipped with HARD drive recovery. This means that you could recover the device without the use of the recovery diskette.

  As mentioned it's series American TV to laptop and I know that you must press the 0 key immediately after the laptop has been powered.
  This should start the recovery

• Cannot load Windows 7 computer MS Flight Simulator (Deluxe).

  Failed to load in the new computer with Windows 7 OS MS Flight Simulator (Deluxe).  There has been repeated warnings for missing files.  Press 'Retry' and it seemed to switch to disk 2.  When almost finished, he said, he could not find the DLL file and load the program.  Please help.

  Hi Pbmfire,

  Microsoft Flight Simulator Deluxe is not compatible with Windows 7.

  Check the link to check for the compatibility: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%20X%20Deluxe&v=Microsoft&uid=&pf=0&pi=0&s=MS%20Flight%20Simulator%20%28Deluxe%29&os=64-bit

  However as a workaround, you can try to install the game in Vista compatibility mode and check if you are able to use the game.

  To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab.

  See link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  I suggest that visit you Microsoft Gaming Forums for further assistance from the link below:

  http://www.Microsoft.com/games/PC/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot load Windows (Vista-Sony Vaio VGN-NS110E)

  So I bought this computer off a friend for $50, knowing very well the problems she experienced. No im hoping I can get some help and do this thing running.

  When I start the computer, I get a screen that says...

  "Unable to start Windows. A recent hardware or software change might be the cause.

  I have two options below...

  Start the reboot system (recommended) - Insert windows instilation disk and restart... Well I don't have the instillation disk

  Start windows normally - goes to loading with green bars screen and handle everyday if I let him

  I downloaded this (iso 120Mo thing) vista recovery disk and he put in the computer and ran the startup of many times repair... 20 times or more.  the only thing I get is "system on the disk volume is damaged." it dosent have one

  When I boot computer and press f8, I get a screen with many options... I can't load the safe mode, safe mode with networking, or safe mode with command prompt and any of the other options seem to give results.

  When I start the computer and press f10, I get a disk read error occurred press Ctrl-alt-del to restart (done nothing doin it just stay on the same screen)

  When I boot the computer and press f2 it evokes the thing of the bios I think and he tell me that I HAVE a HD 250 GB installed in the computer (which seems really odd because when in the Startup Repair and I click on the button "LOAD DRIVERS" I am able to look through the hd and see all the old files left there by my friend BUT HE DOES WATCH THE HD FOR) BE a 140 GB HD?)

  THINGS OF IMPORTANCE MAY BE:

  He mentioned something about someone who replace the hd for him goin for the smallest 140 now 250 gb hd... but it seems strange that the computer is tell me 2 things different in 2 different places (250 GB in bios f2 thing) (140 in the button drivers load the Startup Repair tool) and MI is still able to browse the folders on the hard drive

  his display I have 3 drives c:local disk (140 gb) e:recovery(8.89gb) x: start (33.6 MB)

  loading safe mode it gets stuck on this file crcdisk.sys for awhile and then just restarts the computer

  IF THERES NOTHING ELSE I CAN SAY YOU OR I CAN TRY THINGS PLEASE DO NOT HESITATE TO ASK... REALLY WANT THIS COMPUTER

  EDIT-I TRIED ALSO REINSTALL IT WINDOWS OPTION AND ASKED ME TO ENTER THE PRODUCT KEY I DID USING THE LABEL ON THE BACK OF THE COMPUTER SIAD INVALID PRODUCT KEY AND IT AND I CHECK AND RECHECK IT SOME TIME... IT WAS JUST BUT NOT RETURN INSTALL ME WINDOWS AGAIN? //?????

  MODIFIERMODIFIER - DISBLED REBOOT FAILUER - HAD A BLUE SCREEN WITH A FEW _ ON THAT 'PROCESS1_INITIALIZATION_FAILED' AND THEN IT INSIDE "* STOP: 0Z0000006B (0XC0000102, 0X00000002, 0X00000000, 0X00000000).

  UNRESPONSIVE WORTH... FOUND A DIAGNOSTIC TOOL ON MY HD MANUFACTURERS SITE. IT SORTA UNDERSTOOD WHAT I NEEDED TO KNOW

  NO. DRIVE FOUND ERROR/STATUS CODE: 0120

  WHILE THEY INSPECTED THE SITE FACTORY AGAINST THIS CODE... I GOT THIS...

  An unknown error occurred during testing. This may be an anomaly. Check the connections and repeat the test. If the error repeats, replace the drive.

  HE RAN 6 TIMES WITH THE SAME RUSULT... SAME ERROR CODE

  I HOPE THAT MY FRIEND KEPT HIS RECIPT FOR THIS DRIVE... AS LONG AS ITS ONLY BEEN 4 MONTHS SINCE THE DATE OF MANUFACTURE (FEB.8.2010 SHOULD OPEN UP TO KNOW WHICH DRIVE A LITTLE IT WAS :)) SO I IT DOES NOT MATTER IF IT WAS SOLD WHAT TO THINK OF THE DAY, IT SHOULD STILL BE UNDER SOME SORT OF WARRANTY ID)

• Cannot load Windows 7 64 bit from MSDN disc

  Hello

  I loaded VMware Player 4.0, and it appears at startup without finding the installation disc on my DVD (disc g) operating.  This disc contains autorun.inf and several Windows 7 installation executables, including Windows6. 1 - KB976932 - X 64 .exe, which I would like the charger to run setup.exe.  However, it checks the network and PIX? something load the virtual machine, but seems not to check my DVD drive, which I specified that the installation disc.  What should I do?

  Thank you

  is driveletter G: the correct choice then?

  in any case - if this CD is bootable really try an ISO-file created from it

• Toshiba Satellite Pro 4600; Cannot load Windows.

  A friend recently gave me a refurbished from this laptop model that has been updated with Windows XP Pro and it worked for about a month before a windows system file has been altered. I got a new OS disk and I replaced the file and it worked fine for another month, and when I started it today, it gave me a message saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "and gives me a list of options to reboot. I have not installed anything or nothing changed.

  I also tried each of the options and none work. I get a blue screen that flashes for a split second and then he returned to the screen with the restart options.

  I tried to go to the BIOS menu and setting up for her to start from the cd drive with the OS disk instead of try to reformat and I get a screen with a short message that says ' Media Test Failure. Check cable"and then returns to the screen with the with the restart options. I'm running out of ideas and anything online that I could find so far has helped. If anyone has any ideas at all, I'd like to hear them.

  I want to reformat completely this laptop if it is not too late.

  Any help would be appreciated. Thank you very much.

  Joy

  Hello

  Media Test failure. Check cable message appears because cell phone trying to boot from LAN.
  Maybe the laptop trying to boot from LAN because the HARD drive is no longer available it could be possible
  Have you checked the HARD drive in the BIOS? Please do!
  Check if the HARD disk is available in the BIOS
  If it s not appear not in the BIOS, then the disk HARD is dead and must be replaced.

  PS; You can also change the order start F12 press when the laptop starts upward. Then all the possible boot devices should appear on the screen and you can choose the CD/DVD drive as the boot source.