Cannot map the shared folders to the drive letter in WIndows prompt

Similar Questions

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• cannot change the drive letter of the external hard drive in XP

  I bought an Iomega 1 TB external hard drive and I can not change the drive letter.  I have a click right on my computer and select manage.  When I click on disk management, it does not recognize the outside.  The weird part is that it appears in my computer and I can access the drive without problem.  I disconnected the drive of my XP machine and connected to my Vista laptop and I was able to access it through the management of the disks without problem.  Iomega support claims that it is most likely a problem with my XP machine.  Any ideas how to solve this problem?

  Hello rolandboy,

  Thank you for visiting the Microsoft answers community.

  Try to use diskpart to complete the task.

  -Click Start > run > type diskpart and press enter
  -At the prompt, type list volume , press enter
  -At the prompt, type select volume 1 (where 1 is the number of the volume is the volume that you need to change the drive letter)
    -At the prompt, type assign letter = A (where A is the letter you want to assign your volume)

  Close your CMD, and you should be finished.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the drive letter - Vista

  I'm changing the drive letter for a USB external hard drive.  I go to disk management and right click on the external drive and select change drive letter and paths.  I chose my new drive letter - click Yes to the warning - and that she fails.  Dialog box is titled - logical disk manager and the error message is: the parameter is incorrect.

  Help, please.
  Details:
  Windows Vista Edition Home Premium SP1
  Seagate 2.5 "laptop hard drive - USB
  also tried with Maxtor external hard drive 3.5 "

  Hello

  I have two laptops running Vista. On each of them, I have an external USB or SATA drive that I use as a backup partition.
  I have my own backup utility, and I like to use the letter B for the backup.

  When I change sometimes the discs I've met this parameter is incorrect problem on two computers - sometimes I can change using the method above and sometimes I can't.  I tried to stop the disk cache, anti-virus etc etc etc. with totally inconsistent results so far as I can tell.

  Today I tried to boot mode safe mode (F8 at startup) and tried the same steps as before and it worked on the first attempt.

  Maybe it's worth a try.

  Doug

• Windows 7 cannot map the drive to the DNS 323 NAS device.

  OK, I'll just about my mind with this one. I have a DNS 323 NAS device connected directly to my laptop with the static IP and a crossover cable (removed from my network for troubleshooting of simplicity). I'm running Windows 7 Pro. I can access the web interface of the device, ping and Windows 7, he sees in screen sharing network (taked me on the web of the interface when I click it). I tried to map a drive using the drive mapping by using the server name and Ip and I get the same result. It just says that it cannot connect. I removed all fireewall and virus programs. I have reset the NAS to factory default and the latest firmware.  I tried the safe mode with network and nothing. However, I can run XP mode and that works very well for the drive mapping.

  When I plug this NAS using the method above to another box under XP pro, and an another runnning Windows 7 Pro, they can map drives without problem.  So I think I reduced it to something with my Windows 7. It worked when I first installed 7, but I havn't found this NAS in awhile, so not sure when it stopped.

  Can someone help, it drives me crazy!

  I can't take credit for this answer - I saw it in another forum: uninstall Windows Live Login Assistant... it worked for me! I was unable to map drives to Win7, so that I could do this well with XP.

  I have no idea why it works.

• Export the drive letter of windows and vmware number of hard disk in csv format

  Hello

  is there a way to export to CSV, the windows drive letter (c:, d:, e:, etc.) and the number of disk hard vmware ("Disk 1", hard disk 2", etc.) to a csv file?

  Take a look at this document: http://communities.vmware.com/docs/DOC-12180

  It is based on the idea of Hugo Peeters', but it uses the Invoke-VMScript cmdlet and therefore does not require a network connection to work between the virtual machine and your station PowerCLI.

  Export is sent to the Out-GridView cmdlet, but it can be easily redirected to a CSV file by replacing the line:

  $DiskInfo | Out-GridView

  with:

  $DiskInfo | Export-Csv "C:\Script\VMDiskMapping.csv".

• T440s cannot install the driver Bluetooth on Windows 8

  After you have uninstalled the previous version of the "Intel Proset/Wireless Software for Bluetooth", I use the Lenovo system update to download the latest driver and install it manually. But every time it shows the following figure:

  

  Please help me to fix it. BTW, I used the installer of microsoft own up to the audit of the previous version have been uninstalled completely. Thank you.

  Let me answer that question by myself. After you delete all the related items to "C:\Program Files (x 86) \Intel\Bluetooth" in the registry of windows, the installer for intel proset/weirelss can be treated successfully. Then, everything works fine now. I tried to understand this problem these days, and finally it is resolved. Wuala ~.

• Cannot change the drive letter. Obsolete disk management console.

  Original title:

  Help me please. I'm so sad

  my score is not see the...

  I have a problem, I ask you to solve

  

  I have suffered from an attempt to repeat to restore my driver context

  Please I want a solution to restore my files that were on this context

  

  and here

  

  What should I do

  I don't want to run out of data

  Please I want a solution

  big THX Microsoft

  Please take a look at the following links:

  http://support.Microsoft.com/kb/2001877

  http://social.technet.Microsoft.com/wiki/contents/articles/19472.Windows-Server-the-operation-failed-to-complete-because-the-disk-management-console-view-is-not-up-to-date.aspx

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• What could cause my computer to rendomly change the drive letter assigned to a mapped network drive?

  I use a Windows XP Pro SP3 System. We have dipped sharing network and one of them began to change the drive letter assigned periodically through the week that makes a problem in access to frequently used files. No reason as to why he would do this?

  Hi KyleMiller,

  ·         How you map the network drive?

  Try to re-mapping the network drive and check if it helps. Follow this link to do this.

  How to connect and disconnect a network drive in Windows XP

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers

  Cannot find the driver for a PSC 2175 in list of 64-bit Windows 7 for HP printers.  Can anyone help?

  In fact, the way to solve the problem was to open devices and printers, click with the right button on the icon of the HP psc 2170 Series and use troubleshooting icon.  Who finds the driver, thank God.  Found this just by chance!

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs