Windows 7 cannot map the drive to the DNS 323 NAS device.

Similar Questions

• Windows 7 cannot recognize the gt-19300 galaxy s3 driver

  I did a factory reset my Galaxy S3 GT-19300 but now windows 7 cannot recognize the device. Windows is unable to install the driver and it fails.
  Any suggestion is appreciated.

  See you soon,.

  Hello

  I suggest you to update the computer USB drivers and check if it helps.

  Note: Unplug all devices US waiting for the mouse and keyboard before performing these steps.

  (a) click Startand then click on Panel.

  (b) click system and Maintenance, click System, and then click on Device Manager.

  (c) note: If Control Panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to enlarge ""Universal Serial controllers Bus ", right click on the controller host, click"Uninstall"and click"OK"."
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all the elements "Bus USB controllers'.»»

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  For more information, see the links below:

  Updated a hardware driver that is not working properly:
  http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Automatically get recommended drivers and updates for your hardware:
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I also suggest you to contact Samsung Galaxy Support and check whether they have all the drivers available for the gt-19300 driver Galaxy s3.

  Here is the link to contact Support in Samsung Galaxy: http://www.samsung.com/us/support/

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  =========================================
  If you have a DVD decoder (for example Power DVD) try reinstalling it.

  If it is not... Take a look at the following site:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Also, you could try one of the players following freeware that will play DVDs:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Also, it may be interesting to try to install one of the following Codec Packs:

  * Proceed at your own risk *.

  (1) news of CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  (2) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Can I use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage

  Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem

  Hi susanearle,

  You can try the steps in your previous thread about this problem?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/have-wireless-connection-can-only-connect-from/12a7163c-A54D-4894-81F7-bd4fb92b2da4

  Please let us know, thanks!

• Windows Update cannot check the updates of definition because it has detected an error

  Windows Update cannot verify the update because it finds an error: code 0x80072efe

  l don't know what to do.

  Can you help me please?

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Cannot map the shared folders to the drive letter in WIndows prompt

  I seem to have a problem with the shared folders in a Windows on Fusion 6 client. Turning on shared folders in the VM options creates the "VMWare shared folders" shortcut on my desktop, and I can open and view files shared host, as expected. However, it is not map the shared folders to drive Z: in Windows because I expect, and I can not also go to shared folders using the path "\\vmware-host\Shared records" (for example, only by typing in the address bar in a window of the Explorer). It is a problem, because I need a path that I can put scripts to refer to things in the shared folder.

  Also, if I access network in Explorer, vmware-host is there but trying to open it gives me the error "Windows cannot access \\vmware-host."

  I'm running 6 Fusion on OS X Mavericks, and the guest is Windows 8.1. My .vmx file contains the following lines which I think are related to shared folders:

  insulation. Tools.hgfs.Disable = "FALSE".

  hgfs.mapRootShare = 'TRUE '.

  hgfs.linkRootShare = 'TRUE '.

  sharedFolder0.present = 'TRUE '.

  sharedFolder0.enabled = 'TRUE '.

  sharedFolder0.readAccess = 'TRUE '.

  sharedFolder0.writeAccess = 'TRUE '.

  sharedFolder0.hostPath = ' / users/buck/projects.

  sharedFolder0.guestName = 'projects '.

  sharedFolder0.expiration = "never".

  sharedFolder.maxNum = '1 '.

  For me, the weirdest thing is that I can get for shared folders by using the shortcut on the desktop, but by typing the exact path and the shortcut points to in an Explorer window does not work!

  If anyone has any suggestions on how I could get this works normally, I would be very grateful - thank you!

  Hi Buck,

  Welcome to the community.

  Have you tried to re - install vmware tools in your windows 8.1?

  ARBuck wrote:

  Also, if I access network in Explorer, vmware-host is there but trying to open it gives me the error "Windows cannot access \\vmware-host."

  I think you should activate windows network discovery if you want to browse vmware host in the network.

  You can enable this by

  Control Panel-> network and Internet-> Network and Sharing Center-> the advanced sharing settings

• Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

  I have a HP Pavilion running on XP.

  Device Manager displays the following material: A: HP CD Writer CD16b

  B: pioneer DVD - RomDVD - 116.

  Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

  By clicking on the two points of product

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

  I created the 'properties' of each machine that pilots should be:

  For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

  I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

  Does not cure the problem.

  Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

  I'm out of my depth now. No idea what is ASPi Shell.

  Help, please

  The problem is most likely the pfc.sys.

  What I would say, is to follow the steps under "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

  Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

  Here is some info on the pfc.sys:

  http://www.Neuber.com/TaskManager/process/PFC.sys.html

• OfficeJet Pro l7580 on Windows 8: cannot install the driver

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  The driver might be broken, but I am betting that Windows 8 regenerate the problem will be solved.

  Do a Refresh of Windows 8:

  1. Stand the mouse at the bottom or top right of the screen (if you have a touchscreen, you can slide your finger to the right of the screen to the left) to bring up the bar of charms.
  2. Click settings.
  3. Click on ' change computer setting "below.
  4. Click general.
  5. Scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. Who should start a wizard that will guide you through the update process.

• Windows Vista cannot find the CD/DVD drive

  The problem: my computer does not find my CD/DVD drive, it is not listed in Device Manager as at all CD/DVD drive, it has power because it opens when I press the button, and when I put a CD, it does nothing.

  My computer: I have Windows Vista Home Premium, dv6700 Notebook, 32 bit, running on the System Pack 1. (I tried to update to the pack 2 system, but at some point, he is simply decided to AC turns off and when I booted up my laptop, he did a system restore and poof, System Pack 2 was gone, and I never re-installed.)
  What I tried: I tried the Fix It program here on Windows, and it has detected a problem (if I remember correctly, but had no trouble for him); I tried deleting the upper and lower filters (which I haven't really found, because the CD/DVD is NOT an option in my device manager); I tried setting my computer back to factory settings completely.
  Basically, I'm at a loss to know what to do to try to solve this problem. I don't remember how long this has happened (at the time, that my hard drive does not open even for me to put a CD) and I don't see what program could have caused it as appropriate. The only rider listed is listed under disk drives, and it's WDC WD2500BEVS - 60UST0 ATA Device (I don't know if cela help/questions in all). I do not have a disk; the laptop comes with Windows Vista and if she had a drive anyway, I didn't like this laptop was given to me by my father. I don't know what else to do to try to solve this problem. Someone please help.

  Try to pull the reader iut and reinstall it.

  How to remove a computer laptop dvd drive/ram
  http://www.YouTube.com/watch?v=OfeKj2kywRU

• Installation of Windows 2003: cannot find hard drive during the installation units

  Hello

  I found a strange question here...

  ESXi 4.0 installed on DELL R710 with 2 processors E55xx.

  Then we try to install a virtual machine with Windows 2003.

  The installation cannot continue because the virtual machine cannot detect the disk (virtual disk).

  Are we have to use specific drivers (as the old way install Windows Server 2003 on the physical, press F6, and then insert the drivers for drivers, etc2)

  Please advice...

  I have attached the error and the configuration of the VM

  For Windows 2003, the default controller is the parallel of LSI Logic. For this one, the drivers are already included in Windows 2003.

  André

• Cannot map the subfolders to Synolgy NAS

  Hello - I have just purchased a synology NAS and trying to map to it from my Win 7 PC. I get a strange behavior:

  All readers shared on the NAS have permission to read/write explicitly for the admin and my individual user account that I put in place. Windows file service is enabled, and I am able to access the shared via the UNC path drives and create new folders in their breast.  However, I can only map main shared drive, but not all folders that I create to the breast. For example:

  \\DiskStation\Users - I can map to it by right-clicking and choosing "map network drive".

  \\DiskStation\Users\myname - I cannot map to this, the option is not available when right clicking. Even when I create the Windows folder, then immediately try to map to it.

  In addition, when I MAP the main shared folder, while the drive the folder path field is filled with the path but is grey, as well as the button browse the mapping.

  I searched in the Synology forums but can't find any references to this question. Is this something which is normally a limitation in Windows? Any ideas what is happening out there?

  Thanks for any help

  Hi Tyrenta,

  Thanks for posting on Microsoft Community.

  There is a different team that can help you better on this problem, you can post your query in the mentioned link, below, is for the Technet Forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  If any other issues you your windows, please do not hesitate to contact us and we will be happy to help you.

  Thank you.

• Windows 7 cannot access the cliché in server 2003

  Hello world:

  I using windows 7 pro,
  my company has a server and version is windows server 2003,
  function of shadow copy are already active on the server.
  However, when I map the network drive to share the Server 2003 folder in my pc.
  I want to check the previous version on the network drive on my pc,
  but it does not show NO previous version available.
  When I using my PC to refuel, windows xp version checks the card reader.
  Well Yes, the previous version is show all.
  I was wondering why windows 7 cannot see any previous version?
  kindly help me, thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows 7 cannot resolve the ip addresses of domain names

  I have a desktop computer that I built components purchased in a major computer store.  I got this system works well for several months, now.  Recently, however, I met a problem with one of the modules of memory of 2 GB.  I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name.  I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query).  As you can see, XP I have no problem with internet access or name resolution.  There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem.  I ran ipconfig/release and / renew without any result.

  I did all the following: netsh winsock reset catalog
  netsh int ip reset reset.log
  netsh int ipv6 reset reset.log.
  Still no access.
  I opened regedit and went to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and set the following registry value:
  Value name: IPEnableRouter
  Value type: REG_DWORD
  Value data: 1 (this is the only value I changed - from 0 to 1)
  I then exit regedit and reboot... still no access.  BTW: I noticed now that this entry (IPEnableRouter), nor any of its values, is no longer even exist in my registry.  I think it has something to do with my changing parameters of Cisco Linksys E1000 router to allow me access to my home network.  In addition, even if she says that I'm connected to my home network and the router, I don't see two other computers in the network, only the items that I share my desktop.
  I changed the "Preferred DNS server" to 208.67.222.222 as instructed in a possible solution I found on the web (in XP, of course) and, when it does not, changed to 208.67.220.220 instructions, but no.  Still nothing.
  I can access any Web site... IF I KNOW THE IP ADDRESS!  Unfortunately, my mind is not enough powerful or with enough RAM to remind all the IP addresses that I never go, not to mention every single IP address in the internet.
  If I had remembered to I have copied to Notepad (so I could then copy here) the results of an ipconfig/all command, but I didn't.  If this will help, let me know and I'll get it and post it.  I know that some errors I have received are 'Windows could not automatically detect the network proxy settings"and"registration of the DNS records failed.  The parameter is incorrect"and" an error occurred during the liberation interface Loopback Pseudo-Interface 1: the system cannot find the specified file. "
  Some of the results of an ipconfig/command all, I write down, such as those that came out as strange or maybe wrong.  They are as follows:
  Active IP routing: NO
  WINS proxy enabled: NO
  Host name: (empty)
  Suffix primary DNS: (empty)
  Node type: hybrid
  DNS suffix search list: News:[email protected] (Yes, I use Road Runner by Time Warner, and no, they were not able to help at all)
  Other results:
  ISATAP.KC.RR.com tunnel adapter
  State of the media: Media disconnected
  Card tunnel Teredo Tunneling Pseudo-Interface
  State of the media: Media disconnected
  Please keep in mind that all computers connected to this wireless router have no problem with access to the internet and this computer can access in Windows XP but not Windows 7.  In other words, is there anything wrong with the router and nothing wrong with the wireless network adapter.  Besides, I tried to reboot the router and even resetting (much to the chagrin of my other significant because she was not happy with not being able to access the internet until I was finally able to re - install the router)
  !).  I have also turned off my system, removed the card wireless adapter, waited for about 15 minutes, re-inserted in the PCI slot and return to market the system.  This, of course, did nothing, either.
  After the search for several days and trying various tactics and bugs as suggested all over the web, I'm at the end of my limited knowledge and patience with this problem.  Any help that will solve this problem and allow my Windows 7 to access, once again, the internet would be greatly appreciated.  As a last resort, I might have to re - install Windows 7, but I also read the posts where others have done so, but nothing helped. :(
  Thank you
  Lakusus
  The system configuration:
  Windows 7 64 bit Home Premium 32-bit of Windows XP Home Edition operating systems and in a dual-boot configuration
  Card mother ASUS M4A89GTD PRO series
  AMD Athlon (TM) II X 4 640 clocked at 3.49 GHz
  2.00 GB of RAM
  Linksys Wireless-G PCI adapt
  Graphics card XFX ATI Radeon HD 5750 card w/1 GB GDDR5 memory
  Two hard drives 1 TB SATA and a 250 GB HARD drive partitioned into a total of 10 discs
  Burner DVD HL-DT-ST DVDRAM

  In fact, I have since fixed my problem.  Believe it or not, it wasn't any major and detailed process.  It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out.  Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my!  I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty!

  SO, I clicked on 'Advanced system settings' on the left of the window properties, select the "computer name" tab (1st one at the top left of the window that has popped up) and down to "to rename this computer, click on change." I clicked on the button 'change... '. ».
  In the next window which displayed I got the name I initially chose for my desktop, clicked the button "More"... ' and 'News:[email protected]' in the ' suffix main DNS on this computer: "on the ground (as is my Internet service provider - others may be different) and ensured that the box"Change the suffix main DNS when the domain membership changes"has been checked.
  Then, I clicked OK on this window.  I then made sure that the "Working Group:" radio button was selected and typed "WORKGROUP" in the field below, then click 'OK '.
  Return to the window' system properties 'original, I clicked 'Apply' and 'OK' and then restarted my system.
  Windows 7 being loading, all of a sudden all these programs that were inactive for the past few days began to appear and load and update!  YAY! Laughing out loud
  So, the reason I went into detail about how I solved it is in case anyone else has this same problem, they can check and, if the computer name has also been deleted, follow these steps to correct the problem. Of course, you will need to contact your service provider (if other than the Road Runner by Time Warner) in order to obtain the primary DNS suffix.  I hope this will help others I do not go through the terror I lived not having access to the internet.  Aaaaarrrrggghh!  I MUST have my internet! LMAO