Similar Questions

• Cannot move clips to the timeline.

  Mac OSX: 10.11.2

  Premiere Pro: 10.4.0

  I had problems with Premiere Pro on 10.3 and 10.4. At this point, I just want to get either version working.is curr

  10.3 hangs at startup despite uninstalling all my Red Giant Software

  10.4 opens but when I try to move clips no matter where it just doesn't happen. Cannot move bins clips or timeline. And when I opened an old project, I can't move clips autour on the timeline even if they are already there.

  Any help is greatly appreciated. I know there are many of you who know what it's like to not be able to get the software you paid for work. It's frustrating say the least!

  Removal of the preferences has worked. So far, 10.4 works!

• Cannot move clips on the Timeline

  I just installed CC first on my macbook pro

  I see the clips in the projeckt window when I import my project but I can't get it it from there to the timeline

  How can I get this to work properly?

  Thank you!

  Title changed to be more descriptive. Post edited by: Kevin Monahan

  Jacktoft,

  You have created a (view as a timeline) sequence in your project yet?

  If this isn't the case, it would be the next step in the process. This would be where you drag your imported goods leave the project Panel, Panel Monitor Source (after the setting Points In & Out) or the monitor connector.

  Good luck

  Hunt

• Cannot move objects in the timeline - imported file from v1.0 to v2.0

  I imported a large file of Captivate 1.0 and tried to move a calendar object. None of the deadlines are locked, but I can't move anything. When I try to move something, the CPU goes to 100% for a while before anything NOT be PAST.
  
  So I have a file Captivate that I can't use in 2.0.
  
  Furthermore, it is my first day using the "upgrade". I'm not impressed so far.

  Good luck benhenny - looks like I can't help you.

• Can't see thumbnails of most of my video in the timeline (first CC)

  Hello

  I recently upgraded from CS6 CC and I have a question. Is it normal that when I Zoom in my calendar, I see all the thumbnails of all my clips. When my calendar is all zoomed in on, I see the thumbnail of my very long clips and I need to zoom into see it as short or else do not load and when I Zoom out again they disappear.

  It's really frustrating because I get lost in my work. I tried the video Tumbnails head and tail, miniature head and continuous video Tumbnails video options and I have not changed anything, and yes I checked the Tumbnails video Show.

  Clips need a minimum of width to display thumbnails.

  Where the very small will not show.

• How can I move just the video to the timeline in first cs6, no audio?

  How can I move just the video to the timeline in the first, not the audio?

  Hello! I would try this first official Pro Forum announcement: http://forums.adobe.com/community/premiere/premierepro_current?view=overview

  First experts out there are more likely to help you with your problem

• cannot get audio in the timeline to another video

  cannot get audio in the timeline to another video

  

• First "I can't the video to the timeline" PROBLEM

  Hi everyone, I can't get the video to the timeline, when I try to put it in the timeline panel, I'll see blocked symbol and only I can put sound video, I can't put my video. Help, please.

  It is almost always not having your source/track of timeline targeting "lit.

  

  Those blue boxes to the left of the railway... If it's not blue, but the background color of charcoal, you will not be able to place material on the sequence. If say the target audio source A1 is disabled, well... you can drop the video but the audio is not allowed.

  Neil

• How to restore the original interface of first Pro CC and drag the video to the timeline?

  I downloaded the trial version doesn't have the video and audio tracks on the mounting Panel. I tried to play to find, but it's what happened instead.

  

  Can I know how to restore the original interface?

  Also, how do I drag videos to the timeline when it doesn't have any audio or video track line that I can work with, unlike the CS6 version I was using?

  Thank you.

  Hi Erica,

  To restore:

  In the menu items, choose window > workspace > reset Workspace

  To add the video to the timeline:

  • Select file > new > sequence and create a sequence. Drag the video to the new sequence.

  or

  • In the project Panel, drag your video to the new article . This will create a sequence that best matches your clips properties.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Virgin video in the timeline but the audio is ok

  Virgins of video in the timeline and review windows, audio OK when playback from the timeline. The thumbnails are visible both in the chronology and the media window.  New computer including Intel I5, GeForce GTX 970 4Gig, wins 8 but still using old PE10.

  [Left Pro for first things first... MOD]

  zmojoz

  There are card issue first elements 10 NVIDIA GeForce well-known and specific that has existed for a long time without intervention by Adobe or NVIDIA. The response was to roll back only the NVIDIA GeForce video card/card graph version of the driver at all about may 2013. And, at that time, the old NVIDIA drivers are not old enough for the majority of existing computer operating systems.

  Details of the number 10/NVIDIA first Elements in perspective can be found in the following

  First Elements ATR troubleshooting: PE10: NVIDIA video card Driver Roll Back

  The thread cited in a previous thread here is just my attempt to document cases that they rolled.

  Your choices seem to include

  a. determine if you have a may 2013 version of the NVIDIA GeForce driver on your computer that you can put into action

  b. replace the card from the computer of video/graphics card NVIDIA GeForce with a non NVIDIA GeForce card

  c. move to another version of Premiere Elements since this particular problem has always presented as specific to version 10.

  Please review and consider.

  For any question or need clarification, please ask.

  Thank you.

  RTA

  Add on... This situation exists even in Windows 10 and first items 10 and NVIDIA GeForce.

• Cannot move anything in the browser - icons, tabs, etc.

  I've just upgraded to Firefox 12.0 and have found that I can't do anything to drag anywhere. At first, I thought it was a problem with the Menu Editor extension - I was trying to reposition a component menu, just after doing the upgrade to v11.0. In the Options window the Menu editor that can be done simply by dragging, but it did not work.

  I spent the time wrong with it until I realized that the other drag-type features do not work. In order to found:

  1. Cannot reorganize (drag / move) tabs.
  2. Cannot move the tab stop tab bar to open in another window.
  3. Cannot reorganize bookmarks and favicons on personal bar. Open the context menu of bookmarks toolbar and its commands work.
  4. Cannot move tabs to the bar Favorites or folder.
  5. [Window to customize open] cannot drag items to or from the window customize and cannot rearrange or move the Navigation bar or the bar Add on icons.

  There may be questions focused more on the trail, but they are the only ones I can think of and have found. I don't know if I'd known, on the top of my head, extension interfaces accommodate slide they would fail to work. Basically, nothing moves when I click on it with the cursor and try to drag. I don't get any feedback as circle with slash graphic.

  This may be a conflict extension but before I start to switch to many ad - ons that someone might know if this is a new feature setting, I don't know, that was the case before, when I updated.

  I've also seen a recent thread open when the person has a similar problem (but on a Mac - https://support.mozilla.org/en-US/questions/926256?s=can%27t+drag+and+drop & r = 11 & e = & did = s). I wonder if there are perhaps other elements of that this person also cannot move, but not has not yet discovered, and if this problem and mine is perhaps related.

  After following the instructions with the following...

  • https://support.Mozilla.org/en-us/KB/safe%20Mode
  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  ... I determined that my theme or a corrupt localstore.rdf were the cause of my problems.

  Then begins the troubleshooting extensions (https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes?redirectlocale=en-US & redirectslug = Troubleshooting + extensions + and + themes).

  Hardware acceleration has been eliminated as a cause as it has never been activated.

  It turns out that, like the Mac user in the thread I linked above, Torbutton has been the cause of the problem. I thought that it unlikely just because it seemed so not related to how the problem was evident.

  Torbutton was not invalid he's turned off in the browser, so I considered it "not active".

  This message was posted on the first page of the Torbutton website last spring: "now that the Tor Browser Bundle includes a patched Firefox version, and because we have not enough resources to deal with the Firefox version developer accelerated schedule, the Torbutton toggle model is not recommended. "Users should use Tor Browser Bundle, do not install Torbutton themselves."

  Their "Active Torbutton Tickets" page includes two of the problems I had like individual bugs, "Torbutton add-on interferes with the buttons on toolbar add-ons (including his own)" and «torbutton disables the ability to drag and save quick links»

  They go to a variety of reasons, they no longer support the key in this blog (https://blog.torproject.org/blog/toggle-or-not-toggle-end-torbutton). Mainly for security reasons, partly because they cannot deal with the hourly output FF and last because users are reporting more broken features and incompatibilities with each new version of FF.

• Failed to insert video in the timeline? Perplexed...

  Hi all

  as a quick check has not revealed a similar problem, I am autonomous detachment. Sorry if this has already come up before. in any case...

  I use the last first Pro CC on a mac and I have a recurring issue where I am unable to introduce some video files in the timeline. As I remember, it has nothing to do with a specific format (I may be wrong, however), but here's what's happening. In general, I import a new batch of video files into a project and then, when I try to drag in the timeline, it simply doesn't let me. Tried dragging from the preview screen, using the video icon under him, all I could think off. Even more, I can't click with the right button on the video and turn into a new sequence. Previously when this happened, I usually solve it by dragging in one of the other sequences, until one of them accepts it (based on no criteria seems to me). From there, I can copy/paste in the designated order. Hilarious things. Anyway, this time, none of the existing scripts accepts these files and I am out of options (not to mention the time).

  FYI - the bar more left of video in the timeline (V1 - Vx) is checked, it is not the standard pickle. Also, I can right click and edit and do what I want with all the other files, it's just the specific files I can import at one time. This never happened before the last update, at least not for me. The file in question sinned this time are Quicktime ProRes video files, no sound, but I'm sure that it happened with a couple of other types of codec, however for most of the QT containers, I guess.

  Thanks for your time, I hope someone can help with this.

  Alex

  Quick follow-up. Just, I solved the problem by clearing the sequence in and out points. Let me repeat that - compensation the previously settled points within a sequence that doesn't have nothing to do with the video in question allowed me to right click on the files in the project tab Oh, also, before I 'solved' and output whenever I saw these video files in the window preview and right-click on them happened Premiere Pro would crash. And now, after erasing the In/Out in random order, which, as far as I know, has nothing to do with me the preview of a file in the preview window, it doesn't crash anymore. Everything works perfectly. Don't not to mention that, when I cancel the In/Out clearance, he'll be right back to break and ignoring the video files. I mean, my boy, that it is simply priceless. ++++

  Would much like to know what causes a particular problem, so I would be grateful for any comments on this subject.

  Alex

• I use iphone videos and still images in a project.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  I use iphone videos and still images in a project of first Pro CC.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  Right click on the photo in sequence and "ladder to the chassis '. Can also be set in the preferences and affect imports after the change

  Thank you

  Jeff

• Double click on video on the timeline to reveal the source of the correct timecode window in

  In FCP when you double-click on a video on the timeline, it will load in the window source to the timecode you were displaying. First, sometimes it will load the last position you have the playhead on the source, which is not the exact time, I have the playhead on the timeline. Is it possible to have it so that whatever you do, whenever you double-click on the video on the timeline, it opens in the source timecode even window?

  Hi philbeastall,

  This function is a function that is excluded in the latest version of first Pro CC. This feature has been added in the next version of first Pro CC. Check out the link below for the new features.

  https://blogs.Adobe.com/PremierePro/2014/04/thenextpremiereproccrelease.html?SDID=KLDNF

  Kind regards

  Vinay

• Cannot move items on the desktop to the trash.

  Cannot move items on the desktop to the trash. Get code error - 43.

  Solved my problem. Rebooted and just stop. Strange.